From: Joy Zou joy.zou@nxp.com
The pmic could be trimed with updated BUCK1 range, so update the range for trimed pmic. The default value of Toff_Deb is used to distinguish the non-trimed and trimed pmic.
Signed-off-by: Joy Zou joy.zou@nxp.com Reviewed-by: Ye Li ye.li@nxp.com Signed-off-by: Peng Fan peng.fan@nxp.com --- drivers/power/regulator/pca9450.c | 29 ++++++++++++++++++++++++++++- 1 file changed, 28 insertions(+), 1 deletion(-)
diff --git a/drivers/power/regulator/pca9450.c b/drivers/power/regulator/pca9450.c index 9faf1eab5f9..86b22ead629 100644 --- a/drivers/power/regulator/pca9450.c +++ b/drivers/power/regulator/pca9450.c @@ -71,6 +71,10 @@ static struct pca9450_vrange pca9450_buck123_vranges[] = { PCA_RANGE(600000, 12500, 0, 0x7f), };
+static struct pca9450_vrange pca9450_trim_buck13_vranges[] = { + PCA_RANGE(650000, 12500, 0, 0x7f), +}; + static struct pca9450_vrange pca9450_buck456_vranges[] = { PCA_RANGE(600000, 25000, 0, 0x70), PCA_RANGE(3400000, 0, 0x71, 0x7f), @@ -105,12 +109,18 @@ static struct pca9450_plat pca9450_reg_data[] = { PCA_DATA("BUCK1", PCA9450_BUCK1CTRL, HW_STATE_CONTROL, PCA9450_BUCK1OUT_DVS0, PCA9450_DVS_BUCK_RUN_MASK, pca9450_buck123_vranges), + PCA_DATA("BUCK1_TRIM", PCA9450_BUCK1CTRL, HW_STATE_CONTROL, + PCA9450_BUCK1OUT_DVS0, PCA9450_DVS_BUCK_RUN_MASK, + pca9450_trim_buck13_vranges), PCA_DATA("BUCK2", PCA9450_BUCK2CTRL, HW_STATE_CONTROL, PCA9450_BUCK2OUT_DVS0, PCA9450_DVS_BUCK_RUN_MASK, pca9450_buck123_vranges), PCA_DATA("BUCK3", PCA9450_BUCK3CTRL, HW_STATE_CONTROL, PCA9450_BUCK3OUT_DVS0, PCA9450_DVS_BUCK_RUN_MASK, pca9450_buck123_vranges), + PCA_DATA("BUCK3_TRIM", PCA9450_BUCK3CTRL, HW_STATE_CONTROL, + PCA9450_BUCK3OUT_DVS0, PCA9450_DVS_BUCK_RUN_MASK, + pca9450_trim_buck13_vranges), /* Bucks 4-6 which do not support dynamic voltage scaling */ PCA_DATA("BUCK4", PCA9450_BUCK4CTRL, HW_STATE_CONTROL, PCA9450_BUCK4OUT, PCA9450_DVS_BUCK_RUN_MASK, @@ -271,7 +281,9 @@ static int pca9450_set_value(struct udevice *dev, int uvolt) static int pca9450_regulator_probe(struct udevice *dev) { struct pca9450_plat *plat = dev_get_plat(dev); - int i, type; + int i, type, ret; + unsigned int val; + bool pmic_trim = false;
type = dev_get_driver_data(dev_get_parent(dev));
@@ -281,10 +293,25 @@ static int pca9450_regulator_probe(struct udevice *dev) return -EINVAL; }
+ ret = pmic_reg_read(dev->parent, PCA9450_PWR_CTRL); + if (ret < 0) + return ret; + + val = ret; + + if (type == NXP_CHIP_TYPE_PCA9451A && (val & PCA9450_REG_PWRCTRL_TOFF_DEB)) + pmic_trim = true; + for (i = 0; i < ARRAY_SIZE(pca9450_reg_data); i++) { if (strcmp(dev->name, pca9450_reg_data[i].name)) continue;
+ if (pmic_trim && (!strcmp(pca9450_reg_data[i].name, "BUCK1") || + !strcmp(pca9450_reg_data[i].name, "BUCK3"))) { + *plat = pca9450_reg_data[i + 1]; + return 0; + } + /* PCA9450B/PCA9450C uses BUCK1 and BUCK3 in dual-phase */ if (type == NXP_CHIP_TYPE_PCA9450BC && !strcmp(pca9450_reg_data[i].name, "BUCK3")) {