Hi,
-----Original Message----- From: Paweł Anikiel pan@semihalf.com Sent: Wednesday, 15 June, 2022 7:08 PM To: Simon Goldschmidt simon.k.r.goldschmidt@gmail.com Cc: U-Boot Mailing List u-boot@lists.denx.de; Simon Glass sjg@chromium.org; Fabio Estevam festevam@denx.de; Jagan Teki jagan@amarulasolutions.com; Andre Przywara andre.przywara@arm.com; Armstrong, Neil narmstrong@baylibre.com; Peter Robinson pbrobinson@gmail.com; Tim Harvey tharvey@gateworks.com; Ying-Chun Liu paul.liu@linaro.org; Christian Hewitt christianshewitt@gmail.com; adrian.fiergolski@fastree3d.com; Marek Behún marek.behun@nic.cz; Denk, Wolfgang wd@denx.de; Lim, Elly Siew Chin elly.siew.chin.lim@intel.com; Chee, Tien Fong tien.fong.chee@intel.com; Michal Simek michal.simek@xilinx.com; Vasut, Marek marex@denx.de; Marcin Wojtas mw@semihalf.com Subject: Re: [PATCH v2 00/11] Add Chameleon v3 support
On Thu, May 26, 2022 at 4:37 PM Paweł Anikiel pan@semihalf.com wrote:
The Google Chameleon v3 is a board made for testing both video and audio interfaces of external devices. It has a connector compatible with the Mercury+ AA1 module, which itself contains an Arria 10 SoCFPGA. The Mercury+ AA1 module comes in a few different configurations, the Chameleon V3 supports ME-AA1-270-3E4-D11 and ME-AA1-480-2I3-D12E.
This patchset adds support for the Chameleon v3 (both versions), as well as some bugfixes and optimizations, mostly in Arria 10 code.
V2: Adjust devicetrees so that they work both in u-boot and linux Put u-boot-specific parts of devicetrees into *-u-boot.dtsi files Minor changes in Kconfig, defconfig, and config.h
Paweł Anikiel (11): arm: dts: Add Mercury+ AA1 devicetrees arm: dts: Add Chameleonv3 handoff headers arm: dts: Add Chameleonv3 devicetrees board: Add Chameleonv3 board dir config: Add Chameleonv3 config misc: atsha204a: Increase wake delay by tWHI sysreset: socfpga: Use parent device for reading base address socfpga: arria10: Replace delays with busy waiting in cm_full_cfg socfpga: arria10: Improve bitstream loading speed socfpga: arria10: Wait for fifo empty after writing bitstream socfpga: arria10: Allow dcache_enable before relocation
arch/arm/dts/Makefile | 2 + arch/arm/dts/socfpga_arria10_chameleonv3.dts | 90 ++++++ ...fpga_arria10_chameleonv3_270_3-u-boot.dtsi | 8 + .../dts/socfpga_arria10_chameleonv3_270_3.dts | 5 + ...ocfpga_arria10_chameleonv3_270_3_handoff.h | 305
++++++++++++++++++
...fpga_arria10_chameleonv3_480_2-u-boot.dtsi | 8 + .../dts/socfpga_arria10_chameleonv3_480_2.dts | 5 + ...ocfpga_arria10_chameleonv3_480_2_handoff.h | 305
++++++++++++++++++
.../socfpga_arria10_mercury_aa1-u-boot.dtsi | 54 ++++ arch/arm/dts/socfpga_arria10_mercury_aa1.dtsi | 72 +++++ arch/arm/mach-socfpga/Kconfig | 7 + arch/arm/mach-socfpga/clock_manager.c | 7 +- arch/arm/mach-socfpga/clock_manager_arria10.c | 12 +- .../mach-socfpga/include/mach/clock_manager.h | 4 + arch/arm/mach-socfpga/misc_arria10.c | 26 ++ board/google/chameleonv3/Makefile | 5 + board/google/chameleonv3/board.c | 27 ++ board/google/chameleonv3/fpga.its | 28 ++ board/google/chameleonv3/fpga_early_io.its | 35 ++ board/google/chameleonv3/mercury_aa1.c | 43 +++ board/google/chameleonv3/mercury_aa1.h | 12 + configs/socfpga_chameleonv3_defconfig | 29 ++ drivers/fpga/socfpga_arria10.c | 28 +- drivers/misc/atsha204a-i2c.c | 5 +- drivers/sysreset/sysreset_socfpga.c | 2 +- include/configs/socfpga_chameleonv3.h | 44 +++ 26 files changed, 1154 insertions(+), 14 deletions(-) create mode 100644 arch/arm/dts/socfpga_arria10_chameleonv3.dts create mode 100644 arch/arm/dts/socfpga_arria10_chameleonv3_270_3-u-boot.dtsi create mode 100644 arch/arm/dts/socfpga_arria10_chameleonv3_270_3.dts create mode 100644 arch/arm/dts/socfpga_arria10_chameleonv3_270_3_handoff.h create mode 100644 arch/arm/dts/socfpga_arria10_chameleonv3_480_2-u-boot.dtsi create mode 100644 arch/arm/dts/socfpga_arria10_chameleonv3_480_2.dts create mode 100644 arch/arm/dts/socfpga_arria10_chameleonv3_480_2_handoff.h create mode 100644 arch/arm/dts/socfpga_arria10_mercury_aa1-u-boot.dtsi create mode 100644 arch/arm/dts/socfpga_arria10_mercury_aa1.dtsi create mode 100644 board/google/chameleonv3/Makefile create mode 100644 board/google/chameleonv3/board.c create mode 100644 board/google/chameleonv3/fpga.its create mode 100644 board/google/chameleonv3/fpga_early_io.its create mode 100644 board/google/chameleonv3/mercury_aa1.c create mode 100644 board/google/chameleonv3/mercury_aa1.h create mode 100644 configs/socfpga_chameleonv3_defconfig create mode 100644 include/configs/socfpga_chameleonv3.h
-- 2.36.1.124.g0e6072fb45-goog
Hi,
Could you please take a look? Do you have any comments or remarks to the patchset?
All looks fine to me, I'm in the progress to consolidate all socfpga patches for PR this Friday.
Thanks.
Regards, Paweł