This moves the description of the /config node from README.fdt-control into a separate file doc/device-tree-bindings/config.txt and adds the documentation on the new u-boot,efi-partition-entries-offset property (which overrides CONFIG_EFI_PARTITION_ENTRIES_OFF, if present).
Signed-off-by: Philipp Tomsich philipp.tomsich@theobroma-systems.com --- doc/README.fdt-control | 16 ---------------- doc/device-tree-bindings/config.txt | 22 ++++++++++++++++++++++ 2 files changed, 22 insertions(+), 16 deletions(-) create mode 100644 doc/device-tree-bindings/config.txt
diff --git a/doc/README.fdt-control b/doc/README.fdt-control index 2913fcb..c965629 100644 --- a/doc/README.fdt-control +++ b/doc/README.fdt-control @@ -168,22 +168,6 @@ After board configuration is done, fdt supported u-boot can be build in two ways $ make DEVICE_TREE=<dts-file-name>
-Configuration Options ---------------------- - -A number of run-time configuration options are provided in the /config node -of the control device tree. You can access these using fdtdec_get_config_int(), -fdtdec_get_config_bool() and fdtdec_get_config_string(). - -Available options are: - -silent-console - If present and non-zero, the console is silenced by default on boot. - -no-keyboard - Tells U-Boot not to expect an attached keyboard with a VGA console - - Limitations -----------
diff --git a/doc/device-tree-bindings/config.txt b/doc/device-tree-bindings/config.txt new file mode 100644 index 0000000..5640bae --- /dev/null +++ b/doc/device-tree-bindings/config.txt @@ -0,0 +1,22 @@ +The /config node (Configuration Options) +---------------------------------------- + +A number of run-time configuration options are provided in the /config node +of the control device tree. You can access these using fdtdec_get_config_int(), +fdtdec_get_config_bool() and fdtdec_get_config_string(). + +Available options are: + +silent-console + If present and non-zero, the console is silenced by default on boot. + +no-keyboard + Tells U-Boot not to expect an attached keyboard with a VGA console + +u-boot,efi-partition-entries-offset + If present, this provides an offset (in bytes, from the start of a + device) that should be skipped over before the partition entries. + This is used by the EFI/GPT partition implementation when a device + is formatted. + + This setting will override any values configured via Kconfig.