[U-Boot] [v3 2/2] APM821xx: Add bluestone board support

From: Tirumala Marri tmarri@apm.com

Add support code for bluestone board wth APM82XXX processor based. This patch includes early board init, misc init, configure EBC, initializes UIC, MAKEALL, board.cfg and MAINTAINERS file.

Signed-off-by: Tirumala R Marri <tmarri@apm.com -- V1: * Remove "All rights reserved" phrase from headers. * Add empty line which was removed. * Move EBC definititions to bluestone_config.h file * Remove reconfigure_EBC() function. * Remove unused CONFIG_SDRAM16BIT_OFFSET. * Remove unused CONFIG_SDRAM_INFO_EEPROM_ADDR. * Add empty lines in bluestone.c file. * Replacing AC_R | AC_W | AC_X with AC_RWX. * Remove changes to main Makefile * Remove NAND references from config file. * Squash some of the patches.

V2: * Missing space before "<". * SDR_AHB_CFG not used, remove. * boot device dfinitions are board specific ? removed. * APM82161_MASK not used, remove * set_mcsr() is already called in ddr init, no need to call here. * removed finding bootdevice function which is not used. * Add spaces in tlbentry() function. * Board early init function is empty remove. * Remove CONFIG_SYS_EXTSRAM_BASE. * Set CONFIG_SYS_FLASH_SIZE to 4MB * Remove CONFIG_SIZE_REDUCE & CONFIG_SECTOR_REDUCE. * Spaces around " >> " . * Correct the phy name CONFIG_M88E1111_PHY to CONFIG_RTL8211CL_PHY. V3: * Missing TLB entry for CONFIG_SYS_BOOT_BASE_ADDR. * Correct multiline comment. * Move CONFIG_SYS_EBC_PB0AP etc to EBC area in the config file. * remove unused CONFIG_RTL8211CL_PHY. * Replace hard coded valued for CONFIG_SYS_EBC_CFG with macro definitions. * board.cfg add the entry in sorted. * use puts() if there is no formating needed. * Change APM82XXX to APM821XX --- MAINTAINERS | 3 + MAKEALL | 1 + board/amcc/bluestone/Makefile | 52 +++++++++++ board/amcc/bluestone/bluestone.c | 111 ++++++++++++++++++++++++ board/amcc/bluestone/config.mk | 40 +++++++++ board/amcc/bluestone/init.S | 59 +++++++++++++ boards.cfg | 1 + include/configs/bluestone.h | 175 ++++++++++++++++++++++++++++++++++++++ 8 files changed, 442 insertions(+), 0 deletions(-)

diff --git a/MAINTAINERS b/MAINTAINERS index 4b91b0f..284d136 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -253,6 +253,9 @@ Feng Kan fkan@amcc.com

redwood PPC4xx

+Tirumala Marri tmarri@apm.com + bluestone APM821XX + Brad Kemp Brad.Kemp@seranoa.com

ppmc8260 MPC8260 diff --git a/MAKEALL b/MAKEALL index b34ae33..02d5c17 100755 --- a/MAKEALL +++ b/MAKEALL @@ -191,6 +191,7 @@ LIST_4xx=" \ ASH405 \ bamboo \ bamboo_nand \ + bluestone \ bubinga \ CANBT \ canyonlands \ diff --git a/board/amcc/bluestone/Makefile b/board/amcc/bluestone/Makefile new file mode 100644 index 0000000..41751c8 --- /dev/null +++ b/board/amcc/bluestone/Makefile @@ -0,0 +1,52 @@ +# +# Copyright (c) 2010, Applied Micro Circuits Corporation +# Author: Tirumala R Marri tmarri@apm.com +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS-y := $(BOARD).o +SOBJS := init.o + +COBJS := $(COBJS-y) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(OBJS) $(SOBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak $(obj).depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/amcc/bluestone/bluestone.c b/board/amcc/bluestone/bluestone.c new file mode 100644 index 0000000..9bf5da2 --- /dev/null +++ b/board/amcc/bluestone/bluestone.c @@ -0,0 +1,111 @@ +/* + * Bluestone board support + * + * Copyright (c) 2010, Applied Micro Circuits Corporation + * Author: Tirumala R Marri tmarri@apm.com + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <apm821xx.h> +#include <libfdt.h> +#include <fdt_support.h> +#include <i2c.h> +#include <asm/processor.h> +#include <asm/io.h> +#include <asm/mmu.h> +#include <asm/gpio.h> + +int board_early_init_f(void) +{ + /* + * Setup the interrupt controller polarities, triggers, etc. + */ + mtdcr(UIC0SR, 0xffffffff); /* clear all */ + mtdcr(UIC0ER, 0x00000000); /* disable all */ + mtdcr(UIC0CR, 0x00000005); /* ATI & UIC1 crit are critical */ + mtdcr(UIC0PR, 0xffffffff); /* per ref-board manual */ + mtdcr(UIC0TR, 0x00000000); /* per ref-board manual */ + mtdcr(UIC0VR, 0x00000000); /* int31 highest, base=0x000 */ + mtdcr(UIC0SR, 0xffffffff); /* clear all */ + + mtdcr(UIC1SR, 0xffffffff); /* clear all */ + mtdcr(UIC1ER, 0x00000000); /* disable all */ + mtdcr(UIC1CR, 0x00000000); /* all non-critical */ + mtdcr(UIC1PR, 0xffffffff); /* per ref-board manual */ + mtdcr(UIC1TR, 0x00000000); /* per ref-board manual */ + mtdcr(UIC1VR, 0x00000000); /* int31 highest, base=0x000 */ + mtdcr(UIC1SR, 0xffffffff); /* clear all */ + + mtdcr(UIC2SR, 0xffffffff); /* clear all */ + mtdcr(UIC2ER, 0x00000000); /* disable all */ + mtdcr(UIC2CR, 0x00000000); /* all non-critical */ + mtdcr(UIC2PR, 0xffffffff); /* per ref-board manual */ + mtdcr(UIC2TR, 0x00000000); /* per ref-board manual */ + mtdcr(UIC2VR, 0x00000000); /* int31 highest, base=0x000 */ + mtdcr(UIC2SR, 0xffffffff); /* clear all */ + + mtdcr(UIC3SR, 0xffffffff); /* clear all */ + mtdcr(UIC3ER, 0x00000000); /* disable all */ + mtdcr(UIC3CR, 0x00000000); /* all non-critical */ + mtdcr(UIC3PR, 0xffffffff); /* per ref-board manual */ + mtdcr(UIC3TR, 0x00000000); /* per ref-board manual */ + mtdcr(UIC3VR, 0x00000000); /* int31 highest, base=0x000 */ + mtdcr(UIC3SR, 0xffffffff); /* clear all */ + + /* + * Configure PFC (Pin Function Control) registers + * UART0: 2 pins + */ + mtsdr(SDR0_PFC1, 0x0000000); + + return 0; +} + +int checkboard(void) +{ + char *s = getenv("serial#"); + + puts("Board: Bluestone Evaluation Board"); + + if (s != NULL) { + puts(", serial# "); + puts(s); + } + putc('\n'); + + return 0; +} + +int misc_init_r(void) +{ + u32 sdr0_srst1 = 0; + + /* Setup PLB4-AHB bridge based on the system address map */ + mtdcr(AHB_TOP, 0x8000004B); + mtdcr(AHB_BOT, 0x8000004B); + + /* + * The AHB Bridge core is held in reset after power-on or reset + * so enable it now + */ + mfsdr(SDR0_SRST1, sdr0_srst1); + sdr0_srst1 &= ~SDR0_SRST1_AHB; + mtsdr(SDR0_SRST1, sdr0_srst1); + + return 0; +} diff --git a/board/amcc/bluestone/config.mk b/board/amcc/bluestone/config.mk new file mode 100644 index 0000000..e2194e4 --- /dev/null +++ b/board/amcc/bluestone/config.mk @@ -0,0 +1,40 @@ +# +# Copyright (c) 2010, Applied Micro Circuits Corporation +# Author: Tirumala R Marri tmarri@apm.com +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# +# Applied Micro APM821XX Evaluation board. +# + +sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp + +ifndef TEXT_BASE +TEXT_BASE = 0xFFFA0000 +endif + +PLATFORM_CPPFLAGS += -DCONFIG_440=1 + +ifeq ($(debug),1) +PLATFORM_CPPFLAGS += -DDEBUG +endif + +ifeq ($(dbcr),1) +PLATFORM_CPPFLAGS += -DCONFIG_SYS_INIT_DBCR=0x8cff0000 +endif diff --git a/board/amcc/bluestone/init.S b/board/amcc/bluestone/init.S new file mode 100644 index 0000000..968f733 --- /dev/null +++ b/board/amcc/bluestone/init.S @@ -0,0 +1,59 @@ +/* + * Copyright (c) 2010, Applied Micro Circuits Corporation + * Author: Tirumala R Marri tmarri@apm.com + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <ppc_asm.tmpl> +#include <config.h> +#include <asm/mmu.h> + +/************************************************************************** + * TLB TABLE + * + * This table is used by the cpu boot code to setup the initial tlb + * entries. Rather than make broad assumptions in the cpu source tree, + * this table lets each board set things up however they like. + * + * Pointer to the table is returned in r1 + * + *************************************************************************/ + .section .bootpg,"ax" + .globl tlbtab + +tlbtab: + tlbtab_start + + /* TLB 0 */ + tlbentry(CONFIG_SYS_BOOT_BASE_ADDR, SZ_16M, CONFIG_SYS_BOOT_BASE_ADDR, + 4, AC_RWX | SA_G) + + /* TLB-entry for init-ram in dcache (SA_I must be turned off!) */ + tlbentry(CONFIG_SYS_INIT_RAM_ADDR, SZ_4K, CONFIG_SYS_INIT_RAM_ADDR, + 0, AC_RWX | SA_G) + + /* TLB-entry for OCM */ + tlbentry(CONFIG_SYS_OCM_BASE, SZ_64K, 0x00040000, 4, + AC_RWX | SA_I) + + /* TLB-entry for Local Configuration registers => peripherals */ + tlbentry(CONFIG_SYS_PERIPHERAL_BASE, SZ_16K, + CONFIG_SYS_PERIPHERAL_BASE, 4, AC_RWX | SA_IG) + tlbtab_end diff --git a/boards.cfg b/boards.cfg index 69c6897..f436c66 100644 --- a/boards.cfg +++ b/boards.cfg @@ -186,6 +186,7 @@ t3corp powerpc ppc4xx zeus powerpc ppc4xx acadia powerpc ppc4xx - amcc bamboo powerpc ppc4xx - amcc +bluestone powerpc ppc4xx - amcc bubinga powerpc ppc4xx - amcc ebony powerpc ppc4xx - amcc katmai powerpc ppc4xx - amcc diff --git a/include/configs/bluestone.h b/include/configs/bluestone.h new file mode 100644 index 0000000..40633b1 --- /dev/null +++ b/include/configs/bluestone.h @@ -0,0 +1,175 @@ +/* + * bluestone.h - configuration for Blouestone (APM821XX) + * + * Copyright (c) 2010, Applied Micro Circuits Corporation + * Author: Tirumala R Marri tmarri@apm.com + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * High Level Configuration Options + */ +#define CONFIG_APM821XX 1 /* APM821XX series */ +#define CONFIG_HOSTNAME bluestone + +#define CONFIG_4xx 1 /* ... PPC4xx family */ +#define CONFIG_440 1 +/* + * Include common defines/options for all AMCC eval boards + */ +#include "amcc-common.h" +#define CONFIG_SYS_CLK_FREQ 50000000 + +#define CONFIG_BOARD_TYPES 1 /* support board types */ +#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */ +#define CONFIG_MISC_INIT_R 1 /* Call misc_init_r */ + +/* + * Base addresses -- Note these are effective addresses where the + * actual resources get mapped (not physical addresses) + */ +/* EBC stuff */ +/* later mapped to this addr */ +#define CONFIG_SYS_FLASH_BASE 0xFFF00000 +#define CONFIG_SYS_FLASH_SIZE (4 << 20) /* 1MB usable */ + +/* EBC Boot Space: 0xFF000000 */ +#define CONFIG_SYS_BOOT_BASE_ADDR 0xFF000000 +#define CONFIG_SYS_OCM_BASE 0xE3000000 /* OCM: 32k */ +#define CONFIG_SYS_SRAM_BASE 0xE8000000 /* SRAM: 256k */ +#define CONFIG_SYS_PERIPHERAL_BASE 0xEF600000 /* internal peripherals */ +#define CONFIG_SYS_AHB_BASE 0xE2000000 /* internal AHB peripherals*/ + +/* + * Initial RAM & stack pointer (placed in OCM) + */ +#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_OCM_BASE /* OCM */ +#define CONFIG_SYS_INIT_RAM_END (4 << 10) +#define CONFIG_SYS_GBL_DATA_SIZE 256 /* num bytes initial data */ +#define CONFIG_SYS_GBL_DATA_OFFSET \ + (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET + +/* + * Environment + */ +/* + * Define here the location of the environment variables (FLASH). + */ +#define CONFIG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */ +#define CONFIG_SYS_NOR_CS 0 /* NOR chip connected to CSx */ + +/* + * FLASH related + */ +#define CONFIG_SYS_FLASH_CFI /* The flash is CFI compatible */ +#define CONFIG_FLASH_CFI_DRIVER /* Use common CFI driver */ +#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_8BIT +#define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE} +/* max number of memory banks */ +#define CONFIG_SYS_MAX_FLASH_BANKS 1 +/* max number of sectors on one chip */ +#define CONFIG_SYS_MAX_FLASH_SECT 80 +/* Timeout for Flash Erase (in ms) */ +#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 +/* Timeout for Flash Write (in ms) */ +#define CONFIG_SYS_FLASH_WRITE_TOUT 500 +/* use buffered writes (20x faster) */ +#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 +/* print 'E' for empty sector on flinfo */ +#define CONFIG_SYS_FLASH_EMPTY_INFO +#ifdef CONFIG_ENV_IS_IN_FLASH +#define CONFIG_ENV_SECT_SIZE 0x10000 /* size of one complete sector */ +#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) +#define CONFIG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */ +/* Address and size of Redundant Environment Sector */ +#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR - CONFIG_ENV_SECT_SIZE) +#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE) +#endif /* CONFIG_ENV_IS_IN_FLASH */ + +/* SDRAM */ +#define CONFIG_SPD_EEPROM 1 /* Use SPD EEPROM for setup */ +#define SPD_EEPROM_ADDRESS {0x53, 0x51} /* SPD i2c spd addresses */ +#define CONFIG_PPC4xx_DDR_AUTOCALIBRATION /* IBM DDR autocalibration */ +#define CONFIG_AUTOCALIB "silent\0" /* default is non-verbose */ +#define CONFIG_DDR_ECC 1 /* with ECC support */ + +/* + * I2C + */ +#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed */ +#define CONFIG_SYS_I2C_MULTI_EEPROMS +#define CONFIG_SYS_I2C_EEPROM_ADDR (0xa8 >> 1) +#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 +#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 +#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5 /* Data sheet */ + +/* I2C bootstrap EEPROM */ +#define CONFIG_4xx_CONFIG_I2C_EEPROM_ADDR 0x52 +#define CONFIG_4xx_CONFIG_I2C_EEPROM_OFFSET 0 +#define CONFIG_4xx_CONFIG_BLOCKSIZE 16 + +/* + * Ethernet + */ +#define CONFIG_IBM_EMAC4_V4 1 +#define CONFIG_EMAC_PHY_MODE EMAC_PHY_MODE_NONE_RGMII +#define CONFIG_HAS_ETH0 +/* PHY address, See schematics */ +#define CONFIG_PHY_ADDR 0x1f +/* reset phy upon startup */ +#define CONFIG_PHY_RESET 1 +#define CONFIG_PHY_RESET_R +/* Include GbE speed/duplex detection */ +#define CONFIG_PHY_GIGE 1 +#define CONFIG_PHY_DYNAMIC_ANEG 1 + +/* + * External Bus Controller (EBC) Setup + **/ +#define CONFIG_SYS_EBC_CFG (EBC_CFG_LE_LOCK | \ + EBC_CFG_PTD_ENABLE | \ + EBC_CFG_RTC_2048PERCLK | \ + EBC_CFG_ATC_HI | \ + EBC_CFG_DTC_HI | \ + EBC_CFG_CTC_HI | \ + EBC_CFG_OEO_PREVIOUS) +/* NOR Flash */ +#define CONFIG_SYS_EBC_PB0AP (EBC_BXAP_BME_DISABLED | \ + EBC_BXAP_TWT_ENCODE(64) | \ + EBC_BXAP_BCE_DISABLE | \ + EBC_BXAP_BCT_2TRANS | \ + EBC_BXAP_CSN_ENCODE(1) | \ + EBC_BXAP_OEN_ENCODE(2) | \ + EBC_BXAP_WBN_ENCODE(2) | \ + EBC_BXAP_WBF_ENCODE(2) | \ + EBC_BXAP_TH_ENCODE(7) | \ + EBC_BXAP_SOR_DELAYED | \ + EBC_BXAP_BEM_WRITEONLY | \ + EBC_BXAP_PEN_DISABLED) +/* Peripheral Bank Configuration Register - EBC_BxCR */ +#define CONFIG_SYS_EBC_PB0CR \ + (EBC_BXCR_BAS_ENCODE(CONFIG_SYS_FLASH_BASE) | \ + EBC_BXCR_BS_1MB | \ + EBC_BXCR_BU_RW | \ + EBC_BXCR_BW_8BIT) + + +#endif /* __CONFIG_H */