To comply with the device tree bindings expectations for an Ethernet controller, as well as to simplify the driver code, declare fixed-link nodes for the internal ENETC ports (attached to the mscc_felix switch).
Signed-off-by: Vladimir Oltean vladimir.oltean@nxp.com --- v1->v2: none
arch/arm/dts/fsl-ls1028a.dtsi | 10 ++++++++++ 1 file changed, 10 insertions(+)
diff --git a/arch/arm/dts/fsl-ls1028a.dtsi b/arch/arm/dts/fsl-ls1028a.dtsi index c7c725a4fc84..21f4ef78a059 100644 --- a/arch/arm/dts/fsl-ls1028a.dtsi +++ b/arch/arm/dts/fsl-ls1028a.dtsi @@ -144,12 +144,22 @@ reg = <0x000200 0 0 0 0>; status = "okay"; phy-mode = "internal"; + + fixed-link { + speed = <2500>; + full-duplex; + }; }; mdio0: pci@0,3 { #address-cells=<0>; #size-cells=<1>; reg = <0x000300 0 0 0 0>; status = "disabled"; + + fixed-link { + speed = <1000>; + full-duplex; + }; };
mscc_felix: pci@0,5 {