This converts 2 usages of this option to the non-SPL form, since there is no SPL_USB_MUSB_HOST defined in Kconfig
Signed-off-by: Simon Glass sjg@chromium.org ---
drivers/phy/phy-ab8500-usb.c | 2 +- drivers/usb/musb-new/omap2430.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/phy/phy-ab8500-usb.c b/drivers/phy/phy-ab8500-usb.c index 0e04595717b..3d3d48c9733 100644 --- a/drivers/phy/phy-ab8500-usb.c +++ b/drivers/phy/phy-ab8500-usb.c @@ -19,7 +19,7 @@ static int ab8500_usb_phy_power_on(struct phy *phy) struct udevice *dev = phy->dev; uint set = AB8500_BIT_PHY_CTRL_DEVICE_EN;
- if (CONFIG_IS_ENABLED(USB_MUSB_HOST)) + if (IS_ENABLED(CONFIG_USB_MUSB_HOST)) set = AB8500_BIT_PHY_CTRL_HOST_EN;
return pmic_clrsetbits(dev->parent, AB8500_USB_PHY_CTRL_REG, diff --git a/drivers/usb/musb-new/omap2430.c b/drivers/usb/musb-new/omap2430.c index 42e7abddbc2..482dfdc6be6 100644 --- a/drivers/usb/musb-new/omap2430.c +++ b/drivers/usb/musb-new/omap2430.c @@ -231,7 +231,7 @@ static int omap2430_musb_probe(struct udevice *dev)
otg_board_data = &plat->otg_board_data;
- if (CONFIG_IS_ENABLED(USB_MUSB_HOST)) { + if (IS_ENABLED(CONFIG_USB_MUSB_HOST)) { struct musb_host_data *host = dev_get_priv(dev); struct usb_bus_priv *priv = dev_get_uclass_priv(dev);