Hi Bin,
On Wed, Aug 26, 2015 at 8:17 AM, Bin Meng bmeng.cn@gmail.com wrote:
Add Kconfig option in preparation for moving board to use Kconfig.
Signed-off-by: Bin Meng bmeng.cn@gmail.com
Changes in v2:
- Add PHYLIB Kconfig option and let PCH_GBE select PHYLIB
drivers/net/Kconfig | 15 +++++++++++++++ 1 file changed, 15 insertions(+)
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 7367d9e..5e1687b 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -8,6 +8,12 @@ config DM_ETH This is currently implemented in net/eth.c Look in include/net.h for details.
+config PHYLIB
bool
I don't think we want this as an unchoose-able option. You should include some bool text.
default n
This is not needed, remove it.
helpEnable Ethernet PHY (physical media interface) support.menuconfig NETDEVICES bool "Network device support" depends on NET @@ -79,4 +85,13 @@ config ETH_DESIGNWARE 100Mbit and 1 Gbit operation. You must enable CONFIG_PHYLIB to provide the PHY (physical media interface).
+config PCH_GBE
bool "Intel Platform Controller Hub EG20T GMAC driver"depends on DM_ETH && DM_PCIselect PHYLIBdefault n
This is not needed, remove it.
helpThis MAC is present in Intel Platform Controller Hub EG20T. Itsupports 10/100/1000 Mbps operation.endif # NETDEVICES
1.8.2.1
U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot