In message 1206524999.3662.4.camel@localhost.localdomain you wrote:
Dave Liu (10): ata: merge the ata_piix driver ata: add the support for SATA framework ata: make the ata_piix driver using new SATA framework ata: add the libata support ata: add the fis struct for SATA ata: enable the sata init on bootup ata: add the readme for SATA command line mpc83xx: initialize serdes for MPC837xEMDS boards drivers: Add the support for Freescale SATA controller mpc83xx: enable the SATA interface on mpc837xemds board
You don't mention anythiong about the sc520 board here, yet...
board/freescale/mpc837xemds/mpc837xemds.c | 33 + common/Makefile | 2 +- common/cmd_sata.c | 768 +++ +-------------------- disk/part.c | 14 + disk/part_dos.c | 2 + disk/part_iso.c | 2 + disk/part_mac.c | 1 + doc/README.sata | 69 +++ drivers/block/Makefile | 2 + drivers/block/ata_piix.c | 585 ++++++++++++++++++- drivers/block/fsl_sata.c | 921 ++++++++++++++++++++++ +++++++ drivers/block/fsl_sata.h | 374 ++++++++++++ drivers/block/libata.c | 158 +++++ include/configs/MPC837XEMDS.h | 28 + include/configs/sc520_cdp.h | 27 +-
...you're trying to sneak in configuration changes here.
Have these been tested?
If yes, then please split these off into a separate patch.
If not, then just dump it.
Best regards,
Wolfgang Denk