From: "Shiju Mathew" mshiju@gmail.com I have a pxa270 based board. We have both linux and wince running on the system. Right now we are using uboot to boot linux and
eboot
to boot wince. We want to use uboot to boot both linux and wince. I read a few post in this mailing list regarding wince booting and one of them
says that uboot
supports wince nk.nb0 format. I tried this format as below but just got a message "Starting application at 0xa0100000".
tftp 0xa0100000 NK.nb0 go 0xa0100000
Has anyone successful in booting wince images using uboot.
We use u-boot to boot a CE 5.0 image. I can't tell you what's wrong with your boot, but I can tell you it can be done. The commands are basically what you have - we use different addresses and filenames.
You do need to ensure that the image is loaded where it is built for - that means verify your config.bib is building the image for the address you are downloading to.
You don't need any special tools to create the .nb0 file, just an entry in config.bib to set the ROMSIZE.
Tim Braun, Sr. Des. Eng. LibreStream Technologies 200-55 Rothwell Rd. Winnipeg R3P 2M5