From: Peng Fan peng.fan@nxp.com
pinctrl_wdog as u-boot,dm-spl already marked in imx8mm-verdin-u-boot.dtsi, set_wdog_reset function could be handled by imx_watchdog.c driver.
Signed-off-by: Peng Fan peng.fan@nxp.com --- board/menlo/mx8menlo/mx8menlo.c | 12 ------------ 1 file changed, 12 deletions(-)
diff --git a/board/menlo/mx8menlo/mx8menlo.c b/board/menlo/mx8menlo/mx8menlo.c index 95ff95ad360..9d3708a3637 100644 --- a/board/menlo/mx8menlo/mx8menlo.c +++ b/board/menlo/mx8menlo/mx8menlo.c @@ -12,12 +12,6 @@ #include <asm/mach-imx/iomux-v3.h> #include <spl.h>
-#define WDOG_PAD_CTRL (PAD_CTL_DSE6 | PAD_CTL_ODE | PAD_CTL_PUE | PAD_CTL_PE) - -static iomux_v3_cfg_t const wdog_pads[] = { - IMX8MM_PAD_GPIO1_IO02_WDOG1_WDOG_B | MUX_PAD_CTRL(WDOG_PAD_CTRL), -}; - #define SNVS_BASE_ADDR 0x30370000 #define SNVS_LPSR 0x4c #define SNVS_LPLVDR 0x64 @@ -35,12 +29,6 @@ static void setup_snvs(void)
void board_early_init(void) { - struct wdog_regs *wdog = (struct wdog_regs *)WDOG1_BASE_ADDR; - - imx_iomux_v3_setup_multiple_pads(wdog_pads, ARRAY_SIZE(wdog_pads)); - - set_wdog_reset(wdog); - init_uart_clk(1);
setup_snvs();