Re: [U-Boot-Users] I can get u-boot working on my ixp425 board.

In message 40363731.1060607@smartbridges.com you wrote:

I got the u-boot-1.0.0. And make clean, make ixdp425_config , and make. The 1st first time there is a "Soft FP" issue. After I changed

Then your cross toolchain is misconfigured / inadequate for this job.

cpu/ixp/config.mk as following

" PLATFORM_RELFLAGS += -mhard-float #Change -msoft-float to -mhard-float"

Don;t do this!!!

u-boot.bin onhand, that one can work). What could be the problem in the configuration or something else?

Make sure to use a toolchain that supports soft-float.

Best regards,

Wolfgang Denk