hello everyone!
As described in u-boot readme file, to run hello_world example we have to write "loads", but this command doesnt seem to work with me and give the following msg
Unknown command 'loads' - try 'help'
and when i give the command go 40004 Hello World! This is a test.
following error msg appears
## Starting application at 0x00040004 ... Bus Fault @ 0x00000700, fixup 0x00000000 Machine check in kernel mode. Caused by (from msr): regs 03bc3190 Unknown values in msr NIP: 00000700 XER: 00000000 LR: 03FCE234 REGS: 03bc3190 TRAP: 0200 DAR: 03BC3268 MSR: 00001000 EE: 0 PR: 0 FP: 0 ME: 1 IR/DR: 00
GPR00: 03FCE224 03BC3280 8C03115E 00000002 03BC3674 00000010 FFFFFFFE 00000004 GPR08: 00000041 FFF00208 00000000 FFF00211 00000030 00002002 03FF3000 C3FC4000 GPR16: 40022049 20224A10 03402C44 0000D00C 00003002 00000001 00000000 00000001 GPR24: 00000000 03BC3670 00000000 03BC3674 00040004 03BC3760 03FF35B0 00000002 Call backtrace: machine check
U-Boot 1.1.2 Version: 120/240804
MPC8250 Reset Status: Check Stop, External Soft, External Hard
MPC8250 Clock Configuration - Bus-to-Core Mult 3.5x, VCO Div 2, 60x Bus Freq 30-85 , Core Freq 100-300 - dfbrg 1, corecnf 0x1e, busdf 4, cpmdf 1, plldf 1, pllmf 4 - vco_out 333333330, scc_clk 83333332, brg_clk 20833333 - cpu_clk 233333331, cpm_clk 166666665, bus_clk 66666666
CPU: MPC8250 (HiP4 Rev 14, Mask B.1 4K25A) at 233.333 MHz Board: Marconi PUC I2C: ready DRAM: 64 MB FLASH: 8 MB Regular MDIO/MDC layout Net: FCC1 ETHERNET, FCC3 ETHERNET Enabled autonegotiation for PHY at addr 0 Enabled autonegotiation for PHY at addr 1 Hit any key to stop autoboot: 0 "U-Boot"
Please help me in this regard, as it migth be a minor error which i am unable to encounter. I am stuck at this point and cant start to write my own standalone applications.
Thanks in advance
Kind Regards
Chishti
__________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com