
From: Rob Herring rob.herring@calxeda.com
Add support for AHCI controllers that are not PCI based.
Signed-off-by: Rob Herring rob.herring@calxeda.com --- common/cmd_scsi.c | 6 +++- drivers/block/ahci.c | 62 +++++++++++++++++++++++++++++++++++++++++++++----- 2 files changed, 60 insertions(+), 8 deletions(-)
diff --git a/common/cmd_scsi.c b/common/cmd_scsi.c index be4fe74..25a8299 100644 --- a/common/cmd_scsi.c +++ b/common/cmd_scsi.c @@ -47,7 +47,8 @@ #define SCSI_DEV_ID 0x5288
#else -#error no scsi device defined +#define SCSI_VEND_ID 0 +#define SCSI_DEV_ID 0 #endif
@@ -174,7 +175,7 @@ removable: scsi_curr_dev = -1; }
- +#ifdef CONFIG_PCI void scsi_init(void) { int busdevfunc; @@ -192,6 +193,7 @@ void scsi_init(void) scsi_low_level_init(busdevfunc); scsi_scan(1); } +#endif
block_dev_desc_t * scsi_get_dev(int dev) { diff --git a/drivers/block/ahci.c b/drivers/block/ahci.c index d431c5a..3a69fef 100644 --- a/drivers/block/ahci.c +++ b/drivers/block/ahci.c @@ -78,7 +78,9 @@ static int waiting_for_cmd_completed(volatile u8 *offset,
static int ahci_host_init(struct ahci_probe_ent *probe_ent) { +#ifdef CONFIG_PCI pci_dev_t pdev = probe_ent->dev; +#endif volatile u8 *mmio = (volatile u8 *)probe_ent->mmio_base; u32 tmp, cap_save; u16 tmp16; @@ -110,6 +112,7 @@ static int ahci_host_init(struct ahci_probe_ent *probe_ent) writel(cap_save, mmio + HOST_CAP); writel_with_flush(0xf, mmio + HOST_PORTS_IMPL);
+#ifdef CONFIG_PCI pci_read_config_word(pdev, PCI_VENDOR_ID, &vendor);
if (vendor == PCI_VENDOR_ID_INTEL) { @@ -118,7 +121,7 @@ static int ahci_host_init(struct ahci_probe_ent *probe_ent) tmp16 |= 0xf; pci_write_config_word(pdev, 0x92, tmp16); } - +#endif probe_ent->cap = readl(mmio + HOST_CAP); probe_ent->port_map = readl(mmio + HOST_PORTS_IMPL); probe_ent->n_ports = (probe_ent->cap & 0x1f) + 1; @@ -183,11 +186,11 @@ static int ahci_host_init(struct ahci_probe_ent *probe_ent) writel(tmp | HOST_IRQ_EN, mmio + HOST_CTL); tmp = readl(mmio + HOST_CTL); debug("HOST_CTL 0x%x\n", tmp); - +#ifdef CONFIG_PCI pci_read_config_word(pdev, PCI_COMMAND, &tmp16); tmp |= PCI_COMMAND_MASTER; pci_write_config_word(pdev, PCI_COMMAND, tmp16); - +#endif return 0; }
@@ -212,7 +215,7 @@ static void ahci_print_info(struct ahci_probe_ent *probe_ent) speed_s = "3"; else speed_s = "?"; - +#ifdef CONFIG_PCI pci_read_config_word(pdev, 0x0a, &cc); if (cc == 0x0101) scc_s = "IDE"; @@ -222,7 +225,9 @@ static void ahci_print_info(struct ahci_probe_ent *probe_ent) scc_s = "RAID"; else scc_s = "unknown"; - +#else + scc_s = "SATA"; +#endif printf("AHCI %02x%02x.%02x%02x " "%u slots %u ports %s Gbps 0x%x impl %s mode\n", (vers >> 24) & 0xff, @@ -249,6 +254,7 @@ static void ahci_print_info(struct ahci_probe_ent *probe_ent) cap & (1 << 13) ? "part " : ""); }
+#ifdef CONFIG_PCI static int ahci_init_one(pci_dev_t pdev) { u16 vendor; @@ -291,7 +297,7 @@ static int ahci_init_one(pci_dev_t pdev) err_out: return rc; } - +#endif
#define MAX_DATA_BYTE_COUNT (4*1024*1024)
@@ -667,7 +673,9 @@ void scsi_low_level_init(int busdevfunc) int i; u32 linkmap;
+#ifdef CONFIG_PCI ahci_init_one(busdevfunc); +#endif
linkmap = probe_ent->link_port_map;
@@ -682,6 +690,48 @@ void scsi_low_level_init(int busdevfunc) } }
+int ahci_init(u32 base) +{ + int i, rc = 0; + u32 linkmap; + + memset((void *)ataid, 0, sizeof(hd_driveid_t *) * AHCI_MAX_PORTS); + + probe_ent = malloc(sizeof(struct ahci_probe_ent)); + memset(probe_ent, 0, sizeof(struct ahci_probe_ent)); + + probe_ent->host_flags = ATA_FLAG_SATA + | ATA_FLAG_NO_LEGACY + | ATA_FLAG_MMIO + | ATA_FLAG_PIO_DMA + | ATA_FLAG_NO_ATAPI; + probe_ent->pio_mask = 0x1f; + probe_ent->udma_mask = 0x7f; /*Fixme,assume to support UDMA6 */ + + probe_ent->mmio_base = base; + + /* initialize adapter */ + rc = ahci_host_init(probe_ent); + if (rc) + goto err_out; + + ahci_print_info(probe_ent); + + linkmap = probe_ent->link_port_map; + + for (i = 0; i < CONFIG_SYS_SCSI_MAX_SCSI_ID; i++) { + if (((linkmap >> i) & 0x01)) { + if (ahci_port_start((u8) i)) { + printf("Can not start port %d\n", i); + continue; + } + ahci_set_feature((u8) i); + } + } + err_out: + return rc; +} +
void scsi_bus_reset(void) {