There is now support for the display pipeline using one LCD interface, the LDB bridge and of course the related media power domain controls.
This is untested as I do not have the EVK but should be enough to use the display, using bmp, lcdputs and co. For console-like commands, it might be also needed to enable the VIDEO_CONSOLE explicitly using:
setenv stdout serial,vidconsole0
Signed-off-by: Miquel Raynal miquel.raynal@bootlin.com --- configs/imx8mp_evk_defconfig | 7 +++++++ 1 file changed, 7 insertions(+)
diff --git a/configs/imx8mp_evk_defconfig b/configs/imx8mp_evk_defconfig index 5369f8b84a4172434dcef142c854d06e3437caf1..a3cdf0f3cb237d7b555a2dca741deee21b771e8c 100644 --- a/configs/imx8mp_evk_defconfig +++ b/configs/imx8mp_evk_defconfig @@ -31,6 +31,7 @@ CONFIG_OF_SYSTEM_SETUP=y CONFIG_DEFAULT_FDT_FILE="imx8mp-evk.dtb" CONFIG_SYS_CBSIZE=2048 CONFIG_SYS_PBSIZE=2074 +# CONFIG_CONSOLE_MUX is not set CONFIG_BOARD_LATE_INIT=y CONFIG_SPL_MAX_SIZE=0x26000 CONFIG_SPL_BOARD_INIT=y @@ -60,6 +61,7 @@ CONFIG_CMD_USB=y CONFIG_CMD_USB_SDP=y CONFIG_CMD_USB_MASS_STORAGE=y CONFIG_CMD_CACHE=y +# CONFIG_CMD_CLS is not set CONFIG_CMD_REGULATOR=y CONFIG_CMD_EXT4_WRITE=y CONFIG_OF_CONTROL=y @@ -112,6 +114,7 @@ CONFIG_PINCTRL_IMX8M=y CONFIG_POWER_DOMAIN=y CONFIG_IMX8M_POWER_DOMAIN=y CONFIG_IMX8MP_HSIOMIX_BLKCTRL=y +CONFIG_IMX8MP_MEDIAMIX_BLKCTRL=y CONFIG_DM_PMIC=y CONFIG_DM_PMIC_PCA9450=y CONFIG_SPL_DM_PMIC_PCA9450=y @@ -139,4 +142,8 @@ CONFIG_USB_GADGET=y CONFIG_USB_GADGET_MANUFACTURER="FSL" CONFIG_USB_GADGET_VENDOR_NUM=0x0525 CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5 +CONFIG_VIDEO=y +CONFIG_VIDEO_BRIDGE=y +CONFIG_IMX_LDB=y +CONFIG_IMX_LCDIF=y CONFIG_IMX_WATCHDOG=y