This patch enabled boards using the SPL framework to set an entry point in the U-Boot mkimage image "u-boot.img". Until now the entry point in the header has been set to 0. By setting CONFIG_SYS_UBOOT_START in the board header, boards can override this default location.
This will be used by the upcoming a3m071 MPC5200 board port.
Signed-off-by: Stefan Roese sr@denx.de ---
Makefile | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-)
diff --git a/Makefile b/Makefile index 328347d..280d7c0 100644 --- a/Makefile +++ b/Makefile @@ -444,9 +444,18 @@ $(obj)u-boot.ldr.hex: $(obj)u-boot.ldr $(obj)u-boot.ldr.srec: $(obj)u-boot.ldr $(OBJCOPY) ${OBJCFLAGS} -O srec $< $@ -I binary
+# +# U-Boot entry point, needed for booting of full-blown U-Boot +# from the SPL U-Boot version. +# +ifndef CONFIG_SYS_UBOOT_START +CONFIG_SYS_UBOOT_START := 0 +endif + $(obj)u-boot.img: $(obj)u-boot.bin $(obj)tools/mkimage -A $(ARCH) -T firmware -C none \ - -O u-boot -a $(CONFIG_SYS_TEXT_BASE) -e 0 \ + -O u-boot -a $(CONFIG_SYS_TEXT_BASE) \ + -e $(CONFIG_SYS_UBOOT_START) \ -n $(shell sed -n -e 's/.*U_BOOT_VERSION//p' $(VERSION_FILE) | \ sed -e 's/"[ ]*$$/ for $(BOARD) board"/') \ -d $< $@