On 4/21/05, Wolfgang Denk wd@denx.de wrote:
In message 528646bc050420163579a4fefd@mail.gmail.com you wrote:
It's looking more like I've got a problem with the hardware configuration on the Linux side now. Time to step through init code....
Can you try the same image on different hardware? Is this an original lite5200? [If yes, feel free to send me your kernel image and I will run it on our systems [not to the list, please]].
Yes, it is an original lite5200. I've got another board that I haven't unpacked yet. I'll try that one and also send you my kernel image once I get into the office this afternoon. Thanks!
I was mulling over the problem last night, and I *think* that when I got my 2.6 kernel to boot it was immediately after briefly trying a 2.4 kernel based on the denx linuxppc_2_4 tree (I was compairing the boot sequences between the two kernels). After that the 2.6 kernel started booting correctly. I did not power cycle the board after trying the 2.4 kernel, I used my bdi2k to reset it. After I power cycled the board the 2.6 kernel stopped working again. I'm going to try to recreate the sequence of events once I'm in the office.