On 2019/11/10 下午8:57, Michael Trimarchi wrote:
Support tinker-s board. The board is equivalent of tinker board except of emmc.
TODO:
- support of usb current burst when the board is powered from pc
Signed-off-by: Michael Trimarchi michael@amarulasolutions.com
Reviewed-by: Kever Yang kever.yang@rock-chips.com
Thanks, - Kever
Changes: v2->v3: drop dmc section v1->v2: Add boot configuration for emmc
arch/arm/dts/Makefile | 1 + arch/arm/dts/rk3288-tinker-s-u-boot.dtsi | 34 ++++++++ arch/arm/dts/rk3288-tinker-s.dts | 29 +++++++ configs/tinker-s-rk3288_defconfig | 99 ++++++++++++++++++++++++ include/configs/tinker_rk3288.h | 1 + 5 files changed, 164 insertions(+) create mode 100644 arch/arm/dts/rk3288-tinker-s-u-boot.dtsi create mode 100644 arch/arm/dts/rk3288-tinker-s.dts create mode 100644 configs/tinker-s-rk3288_defconfig
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 89ab8001ce..7e9d6809ea 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -87,6 +87,7 @@ dtb-$(CONFIG_ROCKCHIP_RK3288) += \ rk3288-popmetal.dtb \ rk3288-rock2-square.dtb \ rk3288-tinker.dtb \
- rk3288-tinker-s.dtb \ rk3288-veyron-jerry.dtb \ rk3288-veyron-mickey.dtb \ rk3288-veyron-minnie.dtb \
diff --git a/arch/arm/dts/rk3288-tinker-s-u-boot.dtsi b/arch/arm/dts/rk3288-tinker-s-u-boot.dtsi new file mode 100644 index 0000000000..a177fca73a --- /dev/null +++ b/arch/arm/dts/rk3288-tinker-s-u-boot.dtsi @@ -0,0 +1,34 @@ +// SPDX-License-Identifier: GPL-2.0+ +/*
- Copyright (C) 2019 Amarula Solutions SRO
- */
+#include "rk3288-u-boot.dtsi" +#include "rk3288-tinker-u-boot.dtsi"
+/ {
- chosen {
u-boot,spl-boot-order = \"same-as-spl", &sdmmc, &emmc;- };
+};
+&emmc {
- u-boot,dm-spl;
+};
+&emmc_clk {
- u-boot,dm-spl;
+};
+&emmc_cmd {
- u-boot,dm-spl;
+};
+&emmc_pwr {
- u-boot,dm-spl;
+};
+&emmc_bus8 {
- u-boot,dm-spl;
+}; diff --git a/arch/arm/dts/rk3288-tinker-s.dts b/arch/arm/dts/rk3288-tinker-s.dts new file mode 100644 index 0000000000..cc7ac5f881 --- /dev/null +++ b/arch/arm/dts/rk3288-tinker-s.dts @@ -0,0 +1,29 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/*
- Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd.
- */
+/dts-v1/;
+#include "rk3288-tinker.dtsi"
+/ {
- model = "Rockchip RK3288 Asus Tinker Board S";
- compatible = "asus,rk3288-tinker-s", "rockchip,rk3288";
- chosen {
stdout-path = &uart2;- };
+};
+&emmc {
- bus-width = <8>;
- cap-mmc-highspeed;
- non-removable;
- pinctrl-names = "default";
- pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_pwr &emmc_bus8>;
- max-frequency = <150000000>;
- mmc-hs200-1_8v;
- mmc-ddr-1_8v;
- status = "okay";
+}; diff --git a/configs/tinker-s-rk3288_defconfig b/configs/tinker-s-rk3288_defconfig new file mode 100644 index 0000000000..c851a93f31 --- /dev/null +++ b/configs/tinker-s-rk3288_defconfig @@ -0,0 +1,99 @@ +CONFIG_ARM=y +CONFIG_ARCH_ROCKCHIP=y +CONFIG_SYS_TEXT_BASE=0x01000000 +CONFIG_SPL_GPIO_SUPPORT=y +CONFIG_ROCKCHIP_RK3288=y +CONFIG_TARGET_TINKER_RK3288=y +CONFIG_NR_DRAM_BANKS=1 +CONFIG_SPL_SIZE_LIMIT=307200 +CONFIG_SPL_STACK_R_ADDR=0x800000 +CONFIG_DEBUG_UART_BASE=0xff690000 +CONFIG_DEBUG_UART_CLOCK=24000000 +CONFIG_DEBUG_UART=y +CONFIG_TPL_SYS_MALLOC_F_LEN=0x4000 +CONFIG_SPL_SYS_MALLOC_F_LEN=0x4000 +CONFIG_SYS_MALLOC_F_LEN=0x4000 +# CONFIG_ANDROID_BOOT_IMAGE is not set +CONFIG_USE_PREBOOT=y +CONFIG_SILENT_CONSOLE=y +CONFIG_CONSOLE_MUX=y +CONFIG_DEFAULT_FDT_FILE="rk3288-tinker-s.dtb" +# CONFIG_DISPLAY_CPUINFO is not set +CONFIG_DISPLAY_BOARDINFO_LATE=y +CONFIG_SPL_STACK_R=y +CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x300000 +CONFIG_SPL_I2C_SUPPORT=y +CONFIG_SPL_POWER_SUPPORT=y +CONFIG_CMD_GPIO=y +CONFIG_CMD_GPT=y +CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y +CONFIG_CMD_SF=y +CONFIG_CMD_SPI=y +CONFIG_CMD_USB=y +CONFIG_CMD_USB_MASS_STORAGE=y +# CONFIG_CMD_SETEXPR is not set +CONFIG_CMD_BMP=y +CONFIG_CMD_CACHE=y +CONFIG_CMD_TIME=y +CONFIG_CMD_PMIC=y +CONFIG_CMD_REGULATOR=y +# CONFIG_SPL_DOS_PARTITION is not set +# CONFIG_SPL_EFI_PARTITION is not set +CONFIG_SPL_PARTITION_UUIDS=y +CONFIG_SPL_OF_CONTROL=y +CONFIG_DEFAULT_DEVICE_TREE="rk3288-tinker-s" +CONFIG_OF_SPL_REMOVE_PROPS="clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents" +CONFIG_ENV_IS_IN_MMC=y +CONFIG_REGMAP=y +CONFIG_SPL_REGMAP=y +CONFIG_SYSCON=y +CONFIG_SPL_SYSCON=y +# CONFIG_SPL_SIMPLE_BUS is not set +CONFIG_CLK=y +CONFIG_SPL_CLK=y +CONFIG_FASTBOOT_FLASH=y +CONFIG_FASTBOOT_FLASH_MMC_DEV=0 +CONFIG_FASTBOOT_CMD_OEM_FORMAT=y +CONFIG_ROCKCHIP_GPIO=y +CONFIG_SYS_I2C_ROCKCHIP=y +CONFIG_MISC=y +CONFIG_I2C_EEPROM=y +CONFIG_MMC_DW=y +CONFIG_MMC_DW_ROCKCHIP=y +CONFIG_SPI_FLASH=y +CONFIG_SF_DEFAULT_SPEED=20000000 +CONFIG_DM_ETH=y +CONFIG_ETH_DESIGNWARE=y +CONFIG_GMAC_ROCKCHIP=y +CONFIG_PINCTRL=y +CONFIG_SPL_PINCTRL=y +CONFIG_DM_PMIC=y +CONFIG_PMIC_RK8XX=y +CONFIG_SPL_DM_REGULATOR=y +CONFIG_DM_REGULATOR_FIXED=y +CONFIG_SPL_DM_REGULATOR_FIXED=y +CONFIG_REGULATOR_RK8XX=y +CONFIG_PWM_ROCKCHIP=y +CONFIG_RAM=y +CONFIG_SPL_RAM=y +CONFIG_DEBUG_UART_SHIFT=2 +CONFIG_SYSRESET=y +CONFIG_USB=y +CONFIG_USB_DWC2=y +CONFIG_ROCKCHIP_USB2_PHY=y +CONFIG_USB_GADGET=y +CONFIG_USB_GADGET_MANUFACTURER="Rockchip" +CONFIG_USB_GADGET_VENDOR_NUM=0x2207 +CONFIG_USB_GADGET_PRODUCT_NUM=0x320a +CONFIG_USB_GADGET_DWC2_OTG=y +CONFIG_USB_HOST_ETHER=y +CONFIG_USB_ETHER_ASIX=y +CONFIG_USB_ETHER_SMSC95XX=y +CONFIG_CMD_DHRYSTONE=y +CONFIG_ERRNO_STR=y +CONFIG_DM_VIDEO=y +CONFIG_DISPLAY=y +CONFIG_VIDEO_ROCKCHIP=y +CONFIG_DISPLAY_ROCKCHIP_HDMI=y +CONFIG_CONSOLE_SCROLL_LINES=10 diff --git a/include/configs/tinker_rk3288.h b/include/configs/tinker_rk3288.h index 5adae68c91..f8a55a2cec 100644 --- a/include/configs/tinker_rk3288.h +++ b/include/configs/tinker_rk3288.h @@ -12,6 +12,7 @@ #undef BOOT_TARGET_DEVICES
#define BOOT_TARGET_DEVICES(func) \
- func(MMC, mmc, 0) \ func(MMC, mmc, 1) \ func(USB, usb, 0) \ func(PXE, pxe, na) \