We don't support the RPM(h)PD power domains in U-Boot, and we don't need to - the necessary resources are on, and we aren't going to enter any low power modes.
We could try using a no-op device, but this requires adding a compatible for every platform, and just pollutes the driver model. So instead let's just remove every "power-domains" property that references the RPM(h)pd power controller. This takes <1ms as we're using OF_LIVE.
Of note, this only applies to drivers which are loading post-relocation. Drivers loaded pre-reloc that reference the rpm(h)pd still need DM_FLAG_DEFAULT_PD_CTRL_OFF in their flags.
Signed-off-by: Caleb Connolly caleb.connolly@linaro.org --- arch/arm/mach-snapdragon/of_fixup.c | 32 ++++++++++++++++++++++++++++++++ 1 file changed, 32 insertions(+)
diff --git a/arch/arm/mach-snapdragon/of_fixup.c b/arch/arm/mach-snapdragon/of_fixup.c index 6810c8617cc0..49f1fc1948f3 100644 --- a/arch/arm/mach-snapdragon/of_fixup.c +++ b/arch/arm/mach-snapdragon/of_fixup.c @@ -21,8 +21,9 @@ #include <dm/of_access.h> #include <dm/of.h> #include <fdt_support.h> #include <linux/errno.h> +#include <stdlib.h>
/* U-Boot only supports USB high-speed mode on Qualcomm platforms with DWC3 * USB controllers. Rather than requiring source level DT changes, we fix up * DT here. This improves compatibility with upstream DT and simplifies the @@ -108,8 +109,39 @@ static void fixup_usb_nodes(void) log_warning("Failed to fixup node %s: %d\n", glue_np->name, ret); } }
+/* Remove all references to the rpmhpd device */ +static void fixup_power_domains(void) +{ + struct device_node *pd = NULL, *np = NULL; + struct property *prop; + const __be32 *val; + + /* All Qualcomm platforms name the rpm(h)pd "power-controller" */ + for_each_of_allnodes(pd) { + if (pd->name && !strcmp("power-controller", pd->name)) + break; + } + + /* Sanity check that this is indeed a power domain controller */ + if (!of_find_property(pd, "#power-domain-cells", NULL)) { + log_err("Found power-controller but it doesn't have #power-domain-cells\n"); + return; + } + + /* Remove all references to the power domain controller */ + for_each_of_allnodes(np) { + if (!(prop = of_find_property(np, "power-domains", NULL))) + continue; + + val = prop->value; + if (val[0] == cpu_to_fdt32(pd->phandle)) + of_remove_property(np, prop); + } +} + void qcom_of_fixup_nodes(void) { fixup_usb_nodes(); + fixup_power_domains(); }