Thank you for that,
I had a look at mx6slevk and I can't find any major differences. Solo light is using a fec-light with some extra registers.
Regards, A
On Thu, Jan 16, 2014 at 11:05 PM, Fabio Estevam festevam@gmail.com wrote:
On Thu, Jan 16, 2014 at 7:37 PM, Andy Ng andreas2025@gmail.com wrote:
Dear colleagues,
I have setup a LAN8720 phy for my imx6Solo/DL custom board but no packets coming out. I can see 50MHz going into the phy from the REF_OUT Pin of the SOLO, I
can
read the phy ID using the u-boot MDIO commands but when I do ftp or ping nothing comes out.
We use LAN8720 on mx6slevk, so maybe you can look at it as reference.
static void setup_iomux_enet(void) { imx_iomux_v3_setup_multiple_pads(enet_pads, ARRAY_SIZE(enet_pads));
/* Reset LAN8720 PHY */ gpio_direction_output(ETH_PHY_RESET, 1); udelay(150); gpio_set_value(ETH_PHY_RESET, 0); udelay(150); gpio_set_value(ETH_PHY_RESET, 1); udelay(200);Writing to zero/delay/write 1 would be enough here.
Regards,
Fabio Estevam