Re: [U-Boot] [PATCH V7 1/3] Initial support for Marvell Orion5x SoC

-----Original Message----- From: u-boot-bounces@lists.denx.de [mailto:u-boot-bounces@lists.denx.de] On Behalf Of Albert Aribaud Sent: Thursday, June 10, 2010 2:20 AM To: u-boot@lists.denx.de Subject: [U-Boot] [PATCH V7 1/3] Initial support for Marvell Orion5x SoC

...snip...

+/*

• • SOC specific misc init
• */

+#if defined(CONFIG_ARCH_MISC_INIT) +int arch_misc_init(void) +{

• u32 temp;
• /*CPU streaming & write allocate */
• temp = readfr_extra_feature_reg();
• temp &= ~(1 << 28); /* disable wr alloc */
• writefr_extra_feature_reg(temp);
• temp = readfr_extra_feature_reg();
• temp &= ~(1 << 29); /* streaming disabled */
• writefr_extra_feature_reg(temp);
• /* L2Cache settings */
• temp = readfr_extra_feature_reg();
• /* Disable L2C pre fetch - Set bit 24 */
• temp |= (1 << 24);
• /* enable L2C - Set bit 22 */
• temp |= (1 << 22);
• writefr_extra_feature_reg(temp);
• icache_enable();
• /* Change reset vector to address 0x0 */
• temp = get_cr();
• set_cr(temp & ~CR_V);
• /* Set CPIOs and MPPs - values provided by board

•   include file */
  

+/*

• writel(ORION5X_MPP_BASE+0x00, ORION5X_MPP0_7);
• writel(ORION5X_MPP_BASE+0x04, ORION5X_MPP8_15);
• writel(ORION5X_MPP_BASE+0x50, ORION5X_MPP16_23);
• writel(ORION5X_GPIO_BASE+0x04, ORION5X_GPIO_OUT_ENABLE);

+*/

Pls remove dead code, I think you need to enable it !!

Regards.. Prafulla . .