Hi Wolfgang Denk,
Thank you very much for the reply!!!
Few questions:
1) You said " If your environment is stored in NOR or NAND flash, then you can use
the tools from the tools/env/ directory (fw_setenv / fw_printenv)."
*It is already stored in NOR Flash. This is not in a separate partition. Should it be in a separate partition? Currently uboot.bin and environment variable are in mtd1 partition. Any problem? Should i create another partition for environment variables alone?
*2) I have downloaded these tools from* http://packages.debian.org/unstable/main/uboot-envtools *. I am not able to make it. I need to cross compile this for MIPS. Can u suggest me an url where i can get the stable and compilable src code.
Thanks Rahanesh
Wolfgang Denk wrote:
Dear Rahanesh,
In message 4AAF71E3.7050702@tataelxsi.co.in you wrote:
Is it Possible from Linux to set an environment variable of u-Boot.?
If your environment is stored in NOR or NAND flash, then you can use the tools from the tools/env/ directory (fw_setenv / fw_printenv).
It should be trivial to adapt the code for other storage devices, too.
But after a successful download of new jffs and writing to mtd2 partition , How will Linux update the environment variable of U-boot?
Use fw_setenv.
Best regards,
Wolfgang Denk
-- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd@denx.de Any sufficiently advanced technology is indistinguishable from magic. - Arthur C. Clarke