From: Ye Li ye.li@nxp.com
Add the IMX8MN to the EHCI-MX7 kconfig dependency.
Signed-off-by: Ye Li ye.li@nxp.com Signed-off-by: Peng Fan peng.fan@nxp.com --- drivers/usb/host/Kconfig | 2 +- drivers/usb/host/ehci-mx6.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index 1e2c5006d4..36eb1138c4 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -147,7 +147,7 @@ config USB_EHCI_MX6
config USB_EHCI_MX7 bool "Support for i.MX7 on-chip EHCI USB controller" - depends on ARCH_MX7 || IMX8MM + depends on ARCH_MX7 || IMX8MM || IMX8MN default y ---help--- Enables support for the on-chip EHCI controller on i.MX7 SoCs. diff --git a/drivers/usb/host/ehci-mx6.c b/drivers/usb/host/ehci-mx6.c index 96dcf7655b..ca015ef2f3 100644 --- a/drivers/usb/host/ehci-mx6.c +++ b/drivers/usb/host/ehci-mx6.c @@ -598,7 +598,7 @@ static int ehci_usb_phy_mode(struct udevice *dev) plat->init_type = USB_INIT_DEVICE; else plat->init_type = USB_INIT_HOST; - } else if (is_mx7() || is_imx8mm()) { + } else if (is_mx7() || is_imx8mm() || is_imx8mn()) { phy_status = (void __iomem *)(addr + USBNC_PHY_STATUS_OFFSET); val = readl(phy_status);