Add a b53_reg read/write command which allows inspecting the switch registers. Because the Broadcom BCM53xx registers have different sizes, we need to split the accesses in 8, 16, 32, 48 or 64 bits to obtain expected results.
Reviewed-by: Stefan Roese sr@denx.de Acked-by: Joe Hershberger joe.hershberger@ni.com Signed-off-by: Florian Fainelli f.fainelli@gmail.com --- drivers/net/phy/b53.c | 139 ++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 139 insertions(+)
diff --git a/drivers/net/phy/b53.c b/drivers/net/phy/b53.c index 185a2cddaba6..f7f2d9f1eef2 100644 --- a/drivers/net/phy/b53.c +++ b/drivers/net/phy/b53.c @@ -627,3 +627,142 @@ int phy_b53_init(void)
return 0; } + +int do_b53_reg_read(const char *name, int argc, char * const argv[]) +{ + u8 page, offset, width; + struct mii_dev *bus; + int ret = -EINVAL; + u64 value64 = 0; + u32 value32 = 0; + u16 value16 = 0; + u8 value8 = 0; + + bus = miiphy_get_dev_by_name(name); + if (!bus) { + printf("unable to find MDIO bus: %s\n", name); + return ret; + } + + page = simple_strtoul(argv[1], NULL, 16); + offset = simple_strtoul(argv[2], NULL, 16); + width = simple_strtoul(argv[3], NULL, 10); + + switch (width) { + case 8: + ret = b53_mdio_read8(bus, page, offset, &value8); + printf("page=0x%02x, offset=0x%02x, value=0x%02x\n", + page, offset, value8); + break; + case 16: + ret = b53_mdio_read16(bus, page, offset, &value16); + printf("page=0x%02x, offset=0x%02x, value=0x%04x\n", + page, offset, value16); + break; + case 32: + ret = b53_mdio_read32(bus, page, offset, &value32); + printf("page=0x%02x, offset=0x%02x, value=0x%08x\n", + page, offset, value32); + break; + case 48: + ret = b53_mdio_read48(bus, page, offset, &value64); + printf("page=0x%02x, offset=0x%02x, value=0x%012llx\n", + page, offset, value64); + break; + case 64: + ret = b53_mdio_read48(bus, page, offset, &value64); + printf("page=0x%02x, offset=0x%02x, value=0x%016llx\n", + page, offset, value64); + break; + default: + printf("Unsupported width: %d\n", width); + break; + } + + return ret; +} + +int do_b53_reg_write(const char *name, int argc, char * const argv[]) +{ + u8 page, offset, width; + struct mii_dev *bus; + int ret = -EINVAL; + u64 value64 = 0; + u32 value = 0; + + bus = miiphy_get_dev_by_name(name); + if (!bus) { + printf("unable to find MDIO bus: %s\n", name); + return ret; + } + + page = simple_strtoul(argv[1], NULL, 16); + offset = simple_strtoul(argv[2], NULL, 16); + width = simple_strtoul(argv[3], NULL, 10); + if (width == 48 || width == 64) + value64 = simple_strtoull(argv[4], NULL, 16); + else + value = simple_strtoul(argv[4], NULL, 16); + + switch (width) { + case 8: + ret = b53_mdio_write8(bus, page, offset, value & 0xff); + break; + case 16: + ret = b53_mdio_write16(bus, page, offset, value); + break; + case 32: + ret = b53_mdio_write32(bus, page, offset, value); + break; + case 48: + ret = b53_mdio_write48(bus, page, offset, value64); + break; + case 64: + ret = b53_mdio_write64(bus, page, offset, value64); + break; + default: + printf("Unsupported width: %d\n", width); + break; + } + + return ret; +} + +int do_b53_reg(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +{ + const char *cmd, *mdioname; + int ret = 0; + + if (argc < 2) + return cmd_usage(cmdtp); + + cmd = argv[1]; + --argc; + ++argv; + + if (!strcmp(cmd, "write")) { + if (argc < 4) + return cmd_usage(cmdtp); + mdioname = argv[1]; + --argc; + ++argv; + ret = do_b53_reg_write(mdioname, argc, argv); + } else if (!strcmp(cmd, "read")) { + if (argc < 5) + return cmd_usage(cmdtp); + mdioname = argv[1]; + --argc; + ++argv; + ret = do_b53_reg_read(mdioname, argc, argv); + } else { + return cmd_usage(cmdtp); + } + + return ret; +} + +U_BOOT_CMD(b53_reg, 7, 1, do_b53_reg, + "Broadcom B53 switch register access", + "write mdioname page (hex) offset (hex) width (dec) value (hex)\n" + "read mdioname page (hex) offset (hex) width (dec)\n" + );