Re: [U-Boot] [BUG] divide by 0 in spi flash probe

On Monday 29 August 2016 11:19 AM, Chris Packham wrote:

Hi,

I'm updating support for a board which uses the Armada-385 from u-boot v2016.05 to use the latest master (v2016.09-rc2 plus a bit).

When I run "sf probe" I get a divide by 0 in mvebu_spi_set_speed because hz has made it through as 0.

There is a bug when sf probe is called second time. This bug is fixed by: https://patchwork.ozlabs.org/patch/659979/

Could you try if this patch helps?