Good evening (o;
I choosed the "atc" platform (o;
Needs some flash adjustments though... At least for the first compilation try not bad:
U-Boot 1.0.0 (Nov 7 2003 - 14:20:49)
MPC8260 Reset Status: External Soft, External Hard
MPC8260 Clock Configuration - Bus-to-Core Mult 2.5x, VCO Div 2, 60x Bus Freq 40-120, Core Freq 100-240 - dfbrg 0, corecnf 0x06, busdf 3, cpmdf 1, plldf 0, pllmf 1 - vco_out 200000000, scc_clk 50000000, brg_clk 50000000 - cpu_clk 125000000, cpm_clk 100000000, bus_clk 50000000
CPU: MPC8260 (HiP3 Rev 01, Mask A.1 1K22A-XC) at 125 MHz Board: VDSL-OR1 DRAM: 32 MB Top of RAM usable for U-Boot at: 02000000 Reserving 154k for U-Boot at: 01fd9000 Reserving 128k for malloc() at: 01fb9000 Reserving 76 Bytes for Board Info at: 01fb8fb4 Reserving 72 Bytes for Global Data at: 01fb8f6c Stack Pointer at: 01fb8f48 New Stack Pointer is: 01fb8f48 Now running in RAM - U-Boot at: 01fd9000 FLASH: ## Unknown FLASH on Bank 0 - Size = 0x00000000 0 kB In: serial Out: serial Err: serial U-Boot relocated to 01fd9000 Net: FCC2 ETHERNET ### main_loop entered: bootdelay=5
### main_loop: bootcmd="version;echo;bootp;setenv bootargs root=/dev/nfs rw nfsroot=$(serverip):$(rootpa th) ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask):$(hostname)::off;bootm" Hit any key to stop autoboot: 0
nice weekend rick