Add calls to the LCD driver from Nvidia board code.
Signed-off-by: Simon Glass sjg@chromium.org --- Changes in v4: - Change order of LCD init so that PWM comes first
Changes in v3: - Add separate call to pwm_init() in board_init()
board/nvidia/common/board.c | 21 ++++++++++++++++++++- 1 files changed, 20 insertions(+), 1 deletions(-)
diff --git a/board/nvidia/common/board.c b/board/nvidia/common/board.c index 7a7d55c..17aafb6 100644 --- a/board/nvidia/common/board.c +++ b/board/nvidia/common/board.c @@ -26,6 +26,7 @@ #include <linux/compiler.h> #include <asm/io.h> #include <asm/arch/clock.h> +#include <asm/arch/display.h> #include <asm/arch/emc.h> #include <asm/arch/pinmux.h> #include <asm/arch/pmu.h> @@ -110,6 +111,9 @@ int board_init(void) if (pwm_init(gd->fdt_blob)) debug("%s: Failed to init pwm\n", __func__); #endif +#ifdef CONFIG_LCD + tegra_lcd_check_next_stage(gd->fdt_blob, 0); +#endif /* boot param addr */ gd->bd->bi_boot_params = (NV_PA_SDRAM_BASE + 0x100);
@@ -135,6 +139,9 @@ int board_init(void) pin_mux_usb(); board_usb_init(gd->fdt_blob); #endif +#ifdef CONFIG_LCD + tegra_lcd_check_next_stage(gd->fdt_blob, 0); +#endif
#ifdef CONFIG_TEGRA_LP0 /* save Sdram params to PMC 2, 4, and 24 for WB0 */ @@ -165,6 +172,18 @@ int board_early_init_f(void) #else gpio_config_uart(); #endif - return 0; +#ifdef CONFIG_LCD + tegra_lcd_early_init(gd->fdt_blob); +#endif +return 0; } #endif /* EARLY_INIT */ + +int board_late_init(void) +{ +#ifdef CONFIG_LCD + /* Make sure we finish initing the LCD */ + tegra_lcd_check_next_stage(gd->fdt_blob, 1); +#endif + return 0; +}