Hi,
we have installed U-boot on a CSB226 board with a PXA255 CPU and a bank of 2 Intel 28F128J3 flash chips (8M x 16bit each). There appeared to be a problem with the flash write function. It would stop after a few words, claiming "flash not erased". Closer inspection revealed, only one of the flashes was in read mode, the other was still in status mode. So I suspected the write_buff function in boards/csb226/flash.c (which wrote the two chips sequentially as two 16-bit words) and modified it to access both chips in parallel as 32 bit (the flash_erase function already works this way). The flash write problem seems to be gone now. Did anyone else experience such problems, or is just our board equipped with particularly unequal or pernickety flash chips? In the attached patch, the old functions are just #ifdef'd out and could be easily reactivated.
There's one more thing I'm unsure about: Which is the right place to set the CPU clock? In boards/csb226/memsetup.S it is set to a default value. In cpu/pxa/start.S it is set to the configured CFG_CPUSPEED value, but memsetup is called after this.
Regards, Rolf