The dts sync from Linux leaves mac0/ethernet1 enabled on icicle, but U-Boot does not currently set a mac address for it. Expand on the code which currently sets the mac for mac1/ethernet0 to optionally set the mac address for the second ethernet.
Reviewed-by: Padmarao Begari padmarao.begari@microchip.com Tested-by: Padmarao Begari padmarao.begari@microchip.com Signed-off-by: Conor Dooley conor.dooley@microchip.com --- board/microchip/mpfs_icicle/mpfs_icicle.c | 15 ++++++++++++--- 1 file changed, 12 insertions(+), 3 deletions(-)
diff --git a/board/microchip/mpfs_icicle/mpfs_icicle.c b/board/microchip/mpfs_icicle/mpfs_icicle.c index e74c9fb03c..0f5f82924e 100644 --- a/board/microchip/mpfs_icicle/mpfs_icicle.c +++ b/board/microchip/mpfs_icicle/mpfs_icicle.c @@ -80,7 +80,7 @@ int board_late_init(void) char icicle_mac_addr[20]; void *blob = (void *)gd->fdt_blob;
- node = fdt_path_offset(blob, "ethernet0"); + node = fdt_path_offset(blob, "/soc/ethernet@20112000"); if (node < 0) { printf("No ethernet0 path offset\n"); return -ENODEV; @@ -88,7 +88,7 @@ int board_late_init(void)
ret = fdtdec_get_byte_array(blob, node, "local-mac-address", mac_addr, 6); if (ret) { - printf("No local-mac-address property\n"); + printf("No local-mac-address property for ethernet@20112000\n"); return -EINVAL; }
@@ -104,7 +104,7 @@ int board_late_init(void)
ret = fdt_setprop(blob, node, "local-mac-address", mac_addr, 6); if (ret) { - printf("Error setting local-mac-address property\n"); + printf("Error setting local-mac-address property for ethernet@20112000\n"); return -ENODEV; }
@@ -123,6 +123,15 @@ int board_late_init(void)
mac_addr[5] = device_serial_number[0] + 1;
+ node = fdt_path_offset(blob, "/soc/ethernet@20110000"); + if (node >= 0) { + ret = fdt_setprop(blob, node, "local-mac-address", mac_addr, 6); + if (ret) { + printf("Error setting local-mac-address property for ethernet@20110000\n"); + return -ENODEV; + } + } + icicle_mac_addr[0] = '[';
sprintf(&icicle_mac_addr[1], "%pM", mac_addr);