Hi Stefan,
On Thu, Sep 1, 2022 at 11:25 PM Stefan Roese sr@denx.de wrote:
This patchset enhaces the recently added Orion Timer driver to support all other Kirkwood & 32bit MVEBU Armada platforms. Additionally, this timer support is then enabled per default for those platforms, so that the board config files don't need to be changed. Also necessary is some dts hacking, so that the timer DT node is available in early U-Boot stages.
I've successfully tested this patchset on an Armada XP board. Additional test on other boards and platforms are very welcome and necessary.
I've also discovered that the timer command (CONFIG_CMD_TIMER) was broken at some time in the past. It does not keep time correctly (lagging realtime badly), with or without this patch set . I think we would want to investigate that issue later.
The sleep command works perfectly. Therefore,
Tested-by: Tony Dinh mibodhi@gmail.com
Thanks, Tony
Thanks, Stefan
Stefan Roese (8): timer: orion-timer: Use timer_conv_64() to fix timer wrap around timer: orion-timer: Add support for other Armada SoC's timer: orion-timer: Add timer_get_boot_us() for BOOTSTAGE support arm: mvebu: Use CONFIG_TIMER on all MVEBU & KIRKWOOD platforms arm: mvebu: dts: Makefile: Compile Armada 375 dtb in a separate step arm: mvebu: dts: armada-375.dtsi: Add timer0 & timer1 arm: mvebu: dts: mvebu-u-boot.dtsi: Add "u-boot,dm-pre-reloc" to timer DT node kirkwood: lsxl: Sync defconfigs
arch/arm/Kconfig | 4 ++ arch/arm/dts/Makefile | 6 ++- arch/arm/dts/armada-375.dtsi | 4 +- arch/arm/dts/mvebu-u-boot.dtsi | 11 +++++ arch/arm/mach-mvebu/include/mach/config.h | 5 --- configs/lschlv2_defconfig | 3 -- configs/lsxhl_defconfig | 3 -- drivers/timer/Kconfig | 5 ++- drivers/timer/orion-timer.c | 53 +++++++++++++++++++++-- 9 files changed, 75 insertions(+), 19 deletions(-)
-- 2.37.3