From: Marcel Ziswiler marcel.ziswiler@toradex.com
Turns out Microship (formerly Micrel) meanwhile integrated proper support for the DLL setup on their KSZ9131. Unfortunately, this conflicts with our previous board code doing that. Fix this by getting rid of our board code and just relying on the generic implementation relying on rgmii-id being used as phy-mode.
Fixes: commit c6df0e2ffdc4 ("net: phy: micrel: add support for DLL setup on ksz9131") Signed-off-by: Marcel Ziswiler marcel.ziswiler@toradex.com ---
(no changes since v1)
arch/arm/dts/imx8mm-verdin.dts | 2 +- board/toradex/verdin-imx8mm/verdin-imx8mm.c | 64 --------------------- 2 files changed, 1 insertion(+), 65 deletions(-)
diff --git a/arch/arm/dts/imx8mm-verdin.dts b/arch/arm/dts/imx8mm-verdin.dts index fb0756d6e19..ac2a4b69d3c 100644 --- a/arch/arm/dts/imx8mm-verdin.dts +++ b/arch/arm/dts/imx8mm-verdin.dts @@ -160,7 +160,7 @@ &fec1 { fsl,magic-packet; phy-handle = <ðphy0>; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; phy-supply = <®_ethphy>; pinctrl-names = "default", "sleep"; pinctrl-0 = <&pinctrl_fec1>; diff --git a/board/toradex/verdin-imx8mm/verdin-imx8mm.c b/board/toradex/verdin-imx8mm/verdin-imx8mm.c index 76f4a1e209a..1644f4b3081 100644 --- a/board/toradex/verdin-imx8mm/verdin-imx8mm.c +++ b/board/toradex/verdin-imx8mm/verdin-imx8mm.c @@ -36,70 +36,6 @@ static int setup_fec(void)
return 0; } - -int board_phy_config(struct phy_device *phydev) -{ - int tmp; - - switch (ksz9xx1_phy_get_id(phydev) & MII_KSZ9x31_SILICON_REV_MASK) { - case PHY_ID_KSZ9031: - /* - * The PHY adds 1.2ns for the RXC and 0ns for TXC clock by - * default. The MAC and the layout don't add a skew between - * clock and data. - * Add 0.3ns for the RXC path and 0.96 + 0.42 ns (1.38 ns) for - * the TXC path to get the required clock skews. - */ - /* control data pad skew - devaddr = 0x02, register = 0x04 */ - ksz9031_phy_extended_write(phydev, 0x02, - MII_KSZ9031_EXT_RGMII_CTRL_SIG_SKEW, - MII_KSZ9031_MOD_DATA_NO_POST_INC, - 0x0070); - /* rx data pad skew - devaddr = 0x02, register = 0x05 */ - ksz9031_phy_extended_write(phydev, 0x02, - MII_KSZ9031_EXT_RGMII_RX_DATA_SKEW, - MII_KSZ9031_MOD_DATA_NO_POST_INC, - 0x7777); - /* tx data pad skew - devaddr = 0x02, register = 0x06 */ - ksz9031_phy_extended_write(phydev, 0x02, - MII_KSZ9031_EXT_RGMII_TX_DATA_SKEW, - MII_KSZ9031_MOD_DATA_NO_POST_INC, - 0x0000); - /* gtx and rx clock pad skew - devaddr = 0x02,register = 0x08 */ - ksz9031_phy_extended_write(phydev, 0x02, - MII_KSZ9031_EXT_RGMII_CLOCK_SKEW, - MII_KSZ9031_MOD_DATA_NO_POST_INC, - 0x03f4); - break; - case PHY_ID_KSZ9131: - default: - /* read rxc dll control - devaddr = 0x2, register = 0x4c */ - tmp = ksz9031_phy_extended_read(phydev, 0x02, - MII_KSZ9131_EXT_RGMII_2NS_SKEW_RXDLL, - MII_KSZ9031_MOD_DATA_NO_POST_INC); - /* disable rxdll bypass (enable 2ns skew delay on RXC) */ - tmp &= ~MII_KSZ9131_RXTXDLL_BYPASS; - /* rxc data pad skew 2ns - devaddr = 0x02, register = 0x4c */ - tmp = ksz9031_phy_extended_write(phydev, 0x02, - MII_KSZ9131_EXT_RGMII_2NS_SKEW_RXDLL, - MII_KSZ9031_MOD_DATA_NO_POST_INC, tmp); - /* read txc dll control - devaddr = 0x02, register = 0x4d */ - tmp = ksz9031_phy_extended_read(phydev, 0x02, - MII_KSZ9131_EXT_RGMII_2NS_SKEW_TXDLL, - MII_KSZ9031_MOD_DATA_NO_POST_INC); - /* disable txdll bypass (enable 2ns skew delay on TXC) */ - tmp &= ~MII_KSZ9131_RXTXDLL_BYPASS; - /* rxc data pad skew 2ns - devaddr = 0x02, register = 0x4d */ - tmp = ksz9031_phy_extended_write(phydev, 0x02, - MII_KSZ9131_EXT_RGMII_2NS_SKEW_TXDLL, - MII_KSZ9031_MOD_DATA_NO_POST_INC, tmp); - break; - } - - if (phydev->drv->config) - phydev->drv->config(phydev); - return 0; -} #endif
int board_init(void)