This series enables ethernet boot support on AM64x SK.
AM64x SoC has CPSW3g IP that supports 2 ext Eth port. ROM supports booting from 2nd port. But currently am65-cpsw-nuss only supports single port (1st port). So the first two patches modify driver to support more than 1 ext port. This is done by breaking up am65-cpsw-nuss into UCLASS_MISC for toplevel NUSS driver and UCLASS_ETH for each of individual ports.
Next 4 patches add mach-k3 and board level changes to enable Ethernet and TFTP to work at SPL.
Last two patches add dts and config changes need to for Ethernet boot.
Tested on AM64x SK with RGMII 1G bootmode at 1G. https://controlc.com/90d555ee
Sanity tested TFTP at U-Boot prompt on AM65x and J721e.
Vignesh Raghavendra (8): mach-k3: common: Instantiate AM65 CPSW NUSS wrapper net: ti: am65-cpsw: Add support for multi port independent MAC mode board: ti: am64x: Init DRAM size in R5/A53 SPL mach-k3: am642_init: Probe AM65 CPSW NUSS for R5/A53 SPL mach-k3: am64_spl: Alias Ethernet RGMII boot to CPGMAC configs: am64x_evm: set eth1 as boot interface ARM: dts: K3-am642-r5-sk: Enable Second CPSW port in R5/A53 SPL configs: am64x_evm_r5/a53_defconfig: Enable configs required for Ethboot
arch/arm/dts/k3-am642-r5-sk.dts | 74 +++++++++++++++++++++++ arch/arm/dts/k3-am642-sk-u-boot.dtsi | 40 +++++++++++- arch/arm/mach-k3/am642_init.c | 7 +++ arch/arm/mach-k3/common.c | 16 +++++ arch/arm/mach-k3/include/mach/am64_spl.h | 1 + board/ti/am64x/evm.c | 3 + configs/am64x_evm_a53_defconfig | 4 ++ configs/am64x_evm_r5_defconfig | 12 ++++ drivers/net/ti/Kconfig | 2 + drivers/net/ti/am65-cpsw-nuss.c | 77 +++++++++++++++--------- include/configs/am64x_evm.h | 5 +- 11 files changed, 212 insertions(+), 29 deletions(-)