JESD216 rev D makes BFPT 20 DWORDs. Update the BFPT size define to reflect that.
The check for rev A or later compared the BFPT header length with the maximum BFPT length, BFPT_DWORD_MAX. Since BFPT_DWORD_MAX was 16, and so was the BFPT length for both rev A and B, this check worked fine. But now, since BFPT_DWORD_MAX is 20, it means this check will also stop BFPT parsing for rev A or B, since their length is 16.
So, instead check for BFPT_DWORD_MAX_JESD216 to stop BFPT parsing for the first JESD216 version, and check for BFPT_DWORD_MAX_JESD216B for the next two versions.
Signed-off-by: Pratyush Yadav p.yadav@ti.com --- drivers/mtd/spi/spi-nor-core.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-)
diff --git a/drivers/mtd/spi/spi-nor-core.c b/drivers/mtd/spi/spi-nor-core.c index b171a35eb5..6ce63994ff 100644 --- a/drivers/mtd/spi/spi-nor-core.c +++ b/drivers/mtd/spi/spi-nor-core.c @@ -79,14 +79,15 @@ struct sfdp_header { /* Basic Flash Parameter Table */
/* - * JESD216 rev B defines a Basic Flash Parameter Table of 16 DWORDs. + * JESD216 rev D defines a Basic Flash Parameter Table of 20 DWORDs. * They are indexed from 1 but C arrays are indexed from 0. */ #define BFPT_DWORD(i) ((i) - 1) -#define BFPT_DWORD_MAX 16 +#define BFPT_DWORD_MAX 20
/* The first version of JESB216 defined only 9 DWORDs. */ #define BFPT_DWORD_MAX_JESD216 9 +#define BFPT_DWORD_MAX_JESD216B 16
/* 1st DWORD. */ #define BFPT_DWORD1_FAST_READ_1_1_2 BIT(16) @@ -1999,7 +2000,7 @@ static int spi_nor_parse_bfpt(struct spi_nor *nor, }
/* Stop here if not JESD216 rev A or later. */ - if (bfpt_header->length < BFPT_DWORD_MAX) + if (bfpt_header->length == BFPT_DWORD_MAX_JESD216) return spi_nor_post_bfpt_fixups(nor, bfpt_header, &bfpt, params);
@@ -2034,6 +2035,11 @@ static int spi_nor_parse_bfpt(struct spi_nor *nor, return -EINVAL; }
+ /* Stop here if JESD216 rev B. */ + if (bfpt_header->length == BFPT_DWORD_MAX_JESD216B) + return spi_nor_post_bfpt_fixups(nor, bfpt_header, &bfpt, + params); + return spi_nor_post_bfpt_fixups(nor, bfpt_header, &bfpt, params); }