Enable usb controllers and phys and add regulator infrastructure for the usb ports on the TS433.
Of course there are no schematics available for the device, so the regulator information comes from the vendor-devicetree with unknown accuracy.
Tested-by: Uwe Kleine-König ukleinek@debian.org Signed-off-by: Heiko Stuebner heiko@sntech.de Link: https://lore.kernel.org/r/20240723195538.1133436-5-heiko@sntech.de
[this needs to be replaced, once the patch hits the devicetree-rebasing repo]
Signed-off-by: Heiko Stuebner heiko@sntech.de --- .../src/arm64/rockchip/rk3568-qnap-ts433.dts | 105 ++++++++++++++++++ 1 file changed, 105 insertions(+)
diff --git a/dts/upstream/src/arm64/rockchip/rk3568-qnap-ts433.dts b/dts/upstream/src/arm64/rockchip/rk3568-qnap-ts433.dts index bc26f2e98c1..da735c4764f 100644 --- a/dts/upstream/src/arm64/rockchip/rk3568-qnap-ts433.dts +++ b/dts/upstream/src/arm64/rockchip/rk3568-qnap-ts433.dts @@ -31,6 +31,49 @@ gpios = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>; vin-supply = <&dc_12v>; }; + + vcc5v0_host: regulator-vcc5v0-host { + compatible = "regulator-fixed"; + enable-active-high; + pinctrl-names = "default"; + pinctrl-0 = <&vcc5v0_host_en>; + gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>; + regulator-name = "vcc5v0_host"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc5v0_usb>; + }; + + vcc5v0_otg: regulator-vcc5v0-otg { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc5v0_otg_en>; + regulator-name = "vcc5v0_otg"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc5v0_usb>; + }; + + vcc5v0_usb: regulator-vcc5v0-usb { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_usb"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&dc_12v>; + }; +}; + +/* connected to usb_host0_xhci */ +&combphy0 { + status = "okay"; };
&gmac0 { @@ -97,6 +140,18 @@ status = "okay"; };
+&pinctrl { + usb { + vcc5v0_host_en: vcc5v0-host-en { + rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + vcc5v0_otg_en: vcc5v0-otg-en { + rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + &sdhci { bus-width = <8>; max-frequency = <200000000>; @@ -121,3 +176,53 @@ &uart2 { status = "okay"; }; + +&usb2phy0 { + status = "okay"; +}; + +/* connected to usb_host0_xhci */ +&usb2phy0_otg { + phy-supply = <&vcc5v0_otg>; + status = "okay"; +}; + +&usb2phy1 { + status = "okay"; +}; + +/* connected to usb_host1_ehci/ohci */ +&usb2phy1_host { + phy-supply = <&vcc5v0_host>; + status = "okay"; +}; + +/* connected to usb_host0_ehci/ohci */ +&usb2phy1_otg { + phy-supply = <&vcc5v0_host>; + status = "okay"; +}; + +/* right port backside */ +&usb_host0_ehci { + status = "okay"; +}; + +&usb_host0_ohci { + status = "okay"; +}; + +/* front port */ +&usb_host0_xhci { + dr_mode = "host"; + status = "okay"; +}; + +/* left port backside */ +&usb_host1_ehci { + status = "okay"; +}; + +&usb_host1_ohci { + status = "okay"; +};