Update the stack to move it slowly to linux with some improvements. We want to support more samsung variant and clean up a bit the code. This will be the last upstream changes for now until a quick review of spl code will be done to reduce duplication. I decided to move the imx8mn_bsh_smm_s2 board to use the full nand detect because onfi can easily fail on no-onfi, no-jedec nand. I take care to move the mt7621 to use nand_detect and ask gently to test it again
Series successfully tested on imx8mn bsh smm s2 with NAND: - Macronix MX30LF4G18AC 512 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
Michael Trimarchi (5): mtd: nand: Rename the nand_manufacturers struct mtd: nand: change return type of nand_get_flash_type() to int mtd: nand: Rename nand_get_flash_type() into nand_detect() mtd: nand: samsung: Retrieve ECC requirements from extended configs: imx8mn_bsh_smm_s2: Use nand_base ident for nand identification
configs/imx8mn_bsh_smm_s2_defconfig | 2 ++ drivers/mtd/nand/raw/mt7621_nand.c | 9 ++++--- drivers/mtd/nand/raw/mxs_nand_spl.c | 8 +++---- drivers/mtd/nand/raw/nand_base.c | 37 +++++++++++++---------------- drivers/mtd/nand/raw/nand_ids.c | 2 +- drivers/mtd/nand/raw/nand_samsung.c | 20 ++++++++++++++++ include/linux/mtd/rawnand.h | 13 +++++----- 7 files changed, 54 insertions(+), 37 deletions(-)