On 02/10/2018 10:57 AM, Lukasz Majewski wrote:
Hi Jonathan,
On Sat, Feb 10, 2018 at 01:45:16AM +0100, Lukasz Majewski wrote:
Hi Jonathan,
On Sat, Feb 03, 2018 at 11:00:35AM -0200, Fabio Estevam wrote:
On Sat, Feb 3, 2018 at 5:29 AM, Lukasz Majewski lukma@denx.de wrote:
The goal of this patch is to clean up the code related to choosing SPL MMC boot mode.
The spl_boot_mode() now is called only in spl_mmc_load_image() function, which is only compiled in if CONFIG_SPL_MMC_SUPPORT is enabled.
To achieve the goal, all per mach/arch implementations eligible for unification has been replaced with one __weak implementation.
Signed-off-by: Lukasz Majewski lukma@denx.de Reviewed-by: Marek Vasut marex@denx.de Reviewed-by: Stefano Babic sbabic@denx.de Acked-by: Michal Simek michal.simek@xilinx.com (For ZynqMP)
Nice cleanup:
Reviewed-by: Fabio Estevam fabio.estevam@nxp.com
This has broken booting via mmc with mx6cuboxi for me.
SPL loops on
U-Boot SPL 2018.03-rc1-00212-g48914fc119 (Feb 10 2018 - 11:04:33 +1300) Trying to boot from MMC1 Failed to mount ext2 filesystem... spl_load_image_ext: ext4fs mount err - 0
Could you check what is the status of following defines in your .config file:
CONFIG_SPL_FAT_SUPPORT CONFIG_SUPPORT_EMMC_BOOT
"# CONFIG_SPL_FAT_SUPPORT is not set"
CONFIG_SUPPORT_EMMC_BOOT is not in the .config at all
CONFIG_SPL_EXT_SUPPORT previously for imx6 would result in MMCSD_MODE_RAW but now it results in MMCSD_MODE_FS.
And if by any chance your don't have: CONFIG_SPL_EXT_SUPPORT defined?
CONFIG_SPL_EXT_SUPPORT=y
Could you for test comment out the above define?
If you look at the logic in spl_mmc.c , you'll see this will work. But what about users who have EXT enabled and want to use it as fallback after loading from RAW failed ? :)