Add document for Banana Pi F3 board which based on SpacemiT's K1 SoC.
Signed-off-by: Kongyang Liu seashell11234455@gmail.com ---
doc/board/index.rst | 1 + doc/board/spacemit/bananapi_f3.rst | 78 ++++++++++++++++++++++++++++++ doc/board/spacemit/index.rst | 8 +++ 3 files changed, 87 insertions(+) create mode 100644 doc/board/spacemit/bananapi_f3.rst create mode 100644 doc/board/spacemit/index.rst
diff --git a/doc/board/index.rst b/doc/board/index.rst index 417c128c7a..367da2d623 100644 --- a/doc/board/index.rst +++ b/doc/board/index.rst @@ -51,6 +51,7 @@ Board-specific doc sipeed/index socionext/index sophgo/index + spacemit/index st/index starfive/index ste/index diff --git a/doc/board/spacemit/bananapi_f3.rst b/doc/board/spacemit/bananapi_f3.rst new file mode 100644 index 0000000000..465040b94f --- /dev/null +++ b/doc/board/spacemit/bananapi_f3.rst @@ -0,0 +1,78 @@ +.. SPDX-License-Identifier: GPL-2.0+ + +Banana Pi F3 +============ + +About This +---------- +Banana Pi F3 board is a industrial grade RISC-V development board, it +design with SpacemiT K1 8 core RISC-V chip, CPU integrates 2.0 TOPs AI +computing power. 4G DDR and 16G eMMC onboard.2x GbE Ethernet prot, 4x USB +3.0 and PCIe for M.2 interface, support HDMI and Dual MIPI-CSI Camera. + +Building +~~~~~~~~ +1. Add the RISC-V toolchain to your PATH. +2. Setup ARCH & cross compilation environment variable: + +.. code-block:: console + + export CROSS_COMPILE=<riscv64 toolchain prefix> + +3. Before building U-Boot, OpenSBI should be built first. OpenSBI can be +built for SpacemiT K1 SoC as below: + +.. code-block:: console + + git clone https://github.com/cyyself/opensbi -b k1-opensbi + cd opensbi + make PLATFORM=generic + +4. Then build U-Boot as following: + +.. code-block:: console + + cd <U-Boot-dir> + make bananapi_f3_defconfig + make OPENSBI=<OpenSBI-dir>/build/platform/generic/firmware/fw_dynamic.bin + +This will generate u-boot.itb + +Booting +~~~~~~~ +Currently, we use a modified vendor's U-Boot SPL to load a FIT image that +includes OpenSBI and U-Boot. Fully describing how to boot into U-Boot is a +challenging task. And the booting method will be added after the SPL +support is available. + +Sample boot log from Banana Pi F3 board +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +.. code-block:: none + + U-Boot 2024.07-00686-g608f2d51760c (Jul 08 2024 - 14:53:51 +0800) + + DRAM: 4 GiB + Core: 18 devices, 7 uclasses, devicetree: separate + Loading Environment from nowhere... OK + In: serial@d4017000 + Out: serial@d4017000 + Err: serial@d4017000 + Net: No ethernet found. + bananapi_f3# cpu detail + 0: cpu@0 spacemit,x60 + ID = 0, freq = 0 Hz: MMU + 1: cpu@1 spacemit,x60 + ID = 1, freq = 0 Hz: MMU + 2: cpu@2 spacemit,x60 + ID = 2, freq = 0 Hz: MMU + 3: cpu@3 spacemit,x60 + ID = 3, freq = 0 Hz: MMU + 4: cpu@4 spacemit,x60 + ID = 4, freq = 0 Hz: MMU + 5: cpu@5 spacemit,x60 + ID = 5, freq = 0 Hz: MMU + 6: cpu@6 spacemit,x60 + ID = 6, freq = 0 Hz: MMU + 7: cpu@7 spacemit,x60 + ID = 7, freq = 0 Hz: MMU + bananapi_f3# diff --git a/doc/board/spacemit/index.rst b/doc/board/spacemit/index.rst new file mode 100644 index 0000000000..cc2bd6ab0a --- /dev/null +++ b/doc/board/spacemit/index.rst @@ -0,0 +1,8 @@ +.. SPDX-License-Identifier: GPL-2.0+ + +SpacemiT +======== +.. toctree:: + :maxdepth: 1 + + bananapi_f3