On 26/03/20 8:56 PM, Adam Ford wrote:
With the converstion of SMC911x to DM, this can facilitate the omap3 boards from LogicPD (now called Beacon EmbeddedWorks) to be converted. There isn't a clean solution to doing this in phases, so the boards are all being done together to avoid breaking functionality.
Because the GPMC bus hasn't been converted, the -u-boot.dtsi node needs to show the address of the ethernet controller for each board.
The board file, which is common betwen the OMAP35 and DM37 SOM LV and Torpedo boards, can remove the manual ethernet initialization, but it still needs to register the address and GPMC configuration for the Ethernet controller which is now being moved around to board_late_init().
Lastly, this patch updates the various config files to add the reference for DM_ETH and remove the SMC address, which is now fetched from the newly created device tree nodes.
Because of this the build is not going through. It is asking to fill in the SMC address value as below:
# # configuration written to .config # .config:1093:warning: symbol value '' invalid for SMC911X_BASE * * Restart config... * * * Network device support * Network device support (NETDEVICES) [Y/n/?] y Enable GbE PHY status parsing and configuration (PHY_GIGE) [N/y/?] n Altera Triple-Speed Ethernet MAC support (ALTERA_TSE) [N/y/?] n Broadcom SF2 (Starfighter2) Ethernet support (BCM_SF2_ETH) [N/y/?] n BCMGENET V5 support (BCMGENET) [N/y/?] n Synopsys DWC Ethernet QOS device support (DWC_ETH_QOS) [N/y/?] n Intel PRO/1000 Gigabit Ethernet support (E1000) [N/y/?] n Synopsys Designware Ethernet MAC (ETH_DESIGNWARE) [N/y/?] n OpenCores 10/100 Mbps Ethernet MAC (ETHOC) [N/y/?] n Freescale FMan ethernet support (FMAN_ENET) [N/y/?] n Ftmac100 Ethernet Support (FTMAC100) [N/y/?] n Ftgmac100 Ethernet Support (FTGMAC100) [N/y/?] n ColdFire Ethernet Support (MCFFEC) [N/y/?] n ColdFire DMA Ethernet Support (FSLDMAFEC) [N/y/?] n Cadence MACB/GEM Ethernet Interface (MACB) [N/y/?] n Enable RGMII (RGMII) [N/y/?] n Enable MII (MII) [N/y/?] n Realtek 8139 series Ethernet controller driver (RTL8139) [N/y/?] n Realtek 8169 series Ethernet controller driver (RTL8169) [N/y/?] n SMSC LAN911x and LAN921x controller driver (SMC911X) [Y/n/?] y SMC911X Base Address (SMC911X_BASE) [] (NEW)
Can you fix it and re send the patch?
Thanks and regards, Lokesh