Hi Sjoerd,
Thank you for the patch.
On ven., janv. 12, 2024 at 09:52, Sjoerd Simons sjoerd@collabora.com wrote:
When dr_mode is "otg" the dwc3 is initially configured in _OTG mode; However in this mode the gadget functionality doesn't work without further configuration. To resolve that on gadget start switch to _DEVICE mode globally and go back to _OTG on stop again.
For this the dwc3_set_mode is renamed to dwc3_core_set_mode to avoid a conflict with the same function exposed by xhci-dwc3
Signed-off-by: Sjoerd Simons sjoerd@collabora.com
Reviewed-by: Mattijs Korpershoek mkorpershoek@baylibre.com
nitpick below.
Changes in v4:
- New patch
drivers/usb/dwc3/core.c | 10 +++++----- drivers/usb/dwc3/core.h | 1 + drivers/usb/dwc3/gadget.c | 6 ++++++ 3 files changed, 12 insertions(+), 5 deletions(-)
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index 4b4fcd8a22e..d22d4c4bb6a 100644 --- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -42,7 +42,7 @@ static LIST_HEAD(dwc3_list); /* -------------------------------------------------------------------------- */
-static void dwc3_set_mode(struct dwc3 *dwc, u32 mode) +void dwc3_core_set_mode(struct dwc3 *dwc, u32 mode) { u32 reg;
@@ -736,7 +736,7 @@ static int dwc3_core_init_mode(struct dwc3 *dwc)
switch (dwc->dr_mode) { case USB_DR_MODE_PERIPHERAL:
dwc3_set_mode(dwc, DWC3_GCTL_PRTCAP_DEVICE);
dwc3_core_set_mode(dwc, DWC3_GCTL_PRTCAP_DEVICE);@@ -744,7 +744,7 @@ static int dwc3_core_init_mode(struct dwc3 *dwc) } break; case USB_DR_MODE_HOST:
dwc3_set_mode(dwc, DWC3_GCTL_PRTCAP_HOST);
dwc3_core_set_mode(dwc, DWC3_GCTL_PRTCAP_HOST);@@ -752,7 +752,7 @@ static int dwc3_core_init_mode(struct dwc3 *dwc) } break; case USB_DR_MODE_OTG:
dwc3_set_mode(dwc, DWC3_GCTL_PRTCAP_OTG);
dwc3_core_set_mode(dwc, DWC3_GCTL_PRTCAP_OTG);@@ -810,7 +810,7 @@ static void dwc3_core_exit_mode(struct dwc3 *dwc) * switch back to peripheral mode * This enables the phy to enter idle and then, if enabled, suspend. */
- dwc3_set_mode(dwc, DWC3_GCTL_PRTCAP_DEVICE);
- dwc3_core_set_mode(dwc, DWC3_GCTL_PRTCAP_DEVICE); dwc3_gadget_run(dwc);
}
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h index 4162a682298..1e7eda89a34 100644 --- a/drivers/usb/dwc3/core.h +++ b/drivers/usb/dwc3/core.h @@ -1057,6 +1057,7 @@ int dwc3_gadget_resize_tx_fifos(struct dwc3 *dwc); void dwc3_of_parse(struct dwc3 *dwc); int dwc3_init(struct dwc3 *dwc); void dwc3_remove(struct dwc3 *dwc); +void dwc3_core_set_mode(struct dwc3 *dwc, u32 mode);
static inline int dwc3_host_init(struct dwc3 *dwc) { return 0; } diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index 406d36ceafe..69d9fe40e2f 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -1468,6 +1468,9 @@ static int dwc3_gadget_start(struct usb_gadget *g,
dwc->gadget_driver = driver;
Doesn't this bit deserves a comment ? When looking at the code it's not obvious that we do this because PRTCAP_OTG is non-functional without any additional configuration.
Maybe something in the lines of:
/** * WORKAROUND: in OTG mode, gadget functionality is non-functional. * Switch to gadget mode only to enable gadget mode */
?
- if (dwc->dr_mode == DWC3_GCTL_PRTCAP_OTG)
dwc3_core_set_mode(dwc, DWC3_GCTL_PRTCAP_DEVICE);- reg = dwc3_readl(dwc->regs, DWC3_DCFG); reg &= ~(DWC3_DCFG_SPEED_MASK);
@@ -1559,6 +1562,9 @@ static int dwc3_gadget_stop(struct usb_gadget *g) __dwc3_gadget_ep_disable(dwc->eps[0]); __dwc3_gadget_ep_disable(dwc->eps[1]);
if (dwc->dr_mode == DWC3_GCTL_PRTCAP_OTG)
dwc3_core_set_mode(dwc, DWC3_GCTL_PRTCAP_OTG);dwc->gadget_driver = NULL;
spin_unlock_irqrestore(&dwc->lock, flags);
-- 2.43.0