23 Feb
2006
23 Feb
'06
8:06 a.m.
In message loom.20060223T071512-141@post.gmane.org you wrote:
Hi, I have a MPC8247 board with 2MB flash and 64MB SDRAM. I am using u-boot 1.1.2. The u-boot comes up if I disable the icache. But when I enable instruction cache from config file (HID0_ICE set in CFG_HID0_FINAL) it hangs in cpu/mpc8260/start.S code shown below. Any pointers as to what could be the issue would be helpful.
http://www.denx.de/wiki/view/DULG/UBootCrashAfterRelocation
Best regards,
Wolfgang Denk
--
Software Engineering: Embedded and Realtime Systems, Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd@denx.de
I've already got a female to worry about. Her name is the Enterprise.
-- Kirk, "The Corbomite Maneuver", stardate 1514.0