On 21 April 2015 at 16:55, Haikun Wang haikun.wang@freescale.com wrote:
Enable Driver Model SPI for ls1021aqds board. DSPI and QSPI is enabled only when boot from QSPI. DSPI and QSPI are compatible under Driver Model SPI.
Signed-off-by: Haikun Wang Haikun.Wang@freescale.com
Reviewed-by: Jagannadha Sutradharudu Teki jagannadh.teki@gmail.com
Changes in v2:
- Move all changes inside of CONFIG_QSPI_BOOT
Changes in v1: None
include/configs/ls1021aqds.h | 17 +++++++++++++++-- 1 file changed, 15 insertions(+), 2 deletions(-)
diff --git a/include/configs/ls1021aqds.h b/include/configs/ls1021aqds.h index 5de416d..c0e4bda 100644 --- a/include/configs/ls1021aqds.h +++ b/include/configs/ls1021aqds.h @@ -408,16 +408,29 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_CMD_FAT #define CONFIG_DOS_PARTITION
-/* QSPI */ +/* SPI */ #ifdef CONFIG_QSPI_BOOT +/* QSPI */ #define CONFIG_FSL_QSPI #define QSPI0_AMBA_BASE 0x40000000 #define FSL_QSPI_FLASH_SIZE (1 << 24) #define FSL_QSPI_FLASH_NUM 2 +#define CONFIG_SPI_FLASH_SPANSION
+/* DSPI */ +#define CONFIG_FSL_DSPI +#define CONFIG_SPI_FLASH_ATMEL
+/* DM SPI */ +#if defined(CONFIG_FSL_DSPI) || defined(CONFIG_FSL_QSPI) +#define CONFIG_OF_CONTROL +#define CONFIG_OF_SEPARATE +#define CONFIG_DM +#define CONFIG_DM_SPI #define CONFIG_CMD_SF +#define CONFIG_DM_SPI_FLASH #define CONFIG_SPI_FLASH -#define CONFIG_SPI_FLASH_SPANSION +#endif #endif
/*
2.1.0.27.g96db324
U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
thanks!