-----Original Message----- From: Jagan Teki jagan@amarulasolutions.com Sent: 20 April 2020 19:08 To: Pragnesh Patel pragnesh.patel@sifive.com; rick@andestech.com; u- boot@lists.denx.de Cc: bmeng.cn@gmail.com; Sagar Kadam sagar.kadam@sifive.com; Paul Walmsley paul.walmsley@sifive.com; Troy Benjegerdes troy.benjegerdes@sifive.com; palmerdabbelt@google.com; anup.patel@wdc.com; atish.patra@wdc.com; linux- amarula@amarulasolutions.com; Jagan Teki jagan@amarulasolutions.com Subject: [PATCH v2 2/3] sifive: fu540: Add U-Boot proper sector start
[External Email] Do not click links or attachments unless you recognize the sender and know the content is safe
Add U-Boot proper sector start offset for SiFive FU540. This value is based on the partition layout supported by SiFive FU540.
u-boot.itb need to write on this specific offset so-that the SPL will retrieve it from here and load.
Signed-off-by: Jagan Teki jagan@amarulasolutions.com
Changes for v2:
- none
common/spl/Kconfig | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/common/spl/Kconfig b/common/spl/Kconfig index 07eee56219..1ebb30344a 100644 --- a/common/spl/Kconfig +++ b/common/spl/Kconfig @@ -308,7 +308,7 @@ config SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR ARCH_MX6 || ARCH_MX7 || \ ARCH_ROCKCHIP || ARCH_MVEBU || ARCH_SOCFPGA || \ ARCH_AT91 || ARCH_ZYNQ || ARCH_KEYSTONE || OMAP34XX || \
OMAP44XX || OMAP54XX || AM33XX || AM43XX
OMAP44XX || OMAP54XX || AM33XX || AM43XX ||- TARGET_SIFIVE_FU540 help Use sector number for specifying U-Boot location on MMC/SD in raw mode.
@@ -325,6 +325,7 @@ config SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR default 0x300 if ARCH_ZYNQ || ARCH_KEYSTONE || OMAP34XX || OMAP44XX || \ OMAP54XX || AM33XX || AM43XX || ARCH_K3 default 0x4000 if ARCH_ROCKCHIP
default 0x822 if TARGET_SIFIVE_FU540 help Address on the MMC to load U-Boot from, when the MMC is being used in raw mode. Units: MMC sectors (1 sector = 512 bytes).-- 2.17.1
Reviewed-by: Pragnesh Patel pragnesh.patel@sifive.com