Re: [U-Boot] [PATCH 2/7] powerpc/mpc8xxx: adjust DDR burst length and chop accroding to sdram width

On May 26, 2011, at 6:25 PM, York Sun wrote:

From: york yorksun@freescale.com

If the bus width is 32-bit, burst chop should be disabled and burst length should be 8. Read from SPD or other source to determine the width.

Signed-off-by: York Sun yorksun@freescale.com

arch/powerpc/cpu/mpc8xxx/ddr/options.c | 24 ++++++++++++++++++++---- 1 files changed, 20 insertions(+), 4 deletions(-)

applied to 85xx next

- k