From: Michael Trimarchi michael@amarulasolutions.com
Engicam i.CoreM6 1.5 Quad/Dual MIPI dtsi is reusing fec node from Engicam i.CoreM6 dtsi but have sampe copy of phy-reset-gpio and phy-mode properties.
So, drop this phy reset methods from imx6qdl-icore-1.5 dsti file.
Cc: Jacopo Mondi jacopo@jmondi.org Signed-off-by: Michael Trimarchi michael@amarulasolutions.com Signed-off-by: Jagan Teki jagan@amarulasolutions.com --- arch/arm/dts/imx6qdl-icore-1.5.dtsi | 2 -- 1 file changed, 2 deletions(-)
diff --git a/arch/arm/dts/imx6qdl-icore-1.5.dtsi b/arch/arm/dts/imx6qdl-icore-1.5.dtsi index d91d46b589..0fd7f2e24d 100644 --- a/arch/arm/dts/imx6qdl-icore-1.5.dtsi +++ b/arch/arm/dts/imx6qdl-icore-1.5.dtsi @@ -25,10 +25,8 @@ &fec { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; - phy-reset-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>; clocks = <&clks IMX6QDL_CLK_ENET>, <&clks IMX6QDL_CLK_ENET>, <&clks IMX6QDL_CLK_ENET_REF>; - phy-mode = "rmii"; status = "okay"; };