On Thursday, January 21, 2016 at 09:55:59 AM, Anand Moon wrote:
Hi Marek,
On 21 January 2016 at 02:04, Marek Vasut marex@denx.de wrote:
On Wednesday, January 20, 2016 at 09:10:07 PM, Anand Moon wrote:
Hi Ted / Marek / Stephen,
On 20 January 2016 at 22:22, Stephen Warren swarren@wwwdotorg.org wrote:
On 01/19/2016 11:24 PM, Ted Chen wrote:
This patch adds driver support for the Realtek RTL8152B/RTL8153 USB network adapters.
This looks fine to me, although I didn't take a detailed enough look to actually give and an ack/reviewed-by.
What about the other patch: usb xhci Fix vendor command error if the request.patch
Please repost it , make sure to CC everyone . If there is agreement that it fixes real issue, I'll pick it.
After setting the usbether mac address my odroid xu4 board shop booting. even after reset of environment it dose not boot.
--- ------------------------------ U-Boot 2016.01-00406-g048c61d-dirty (Jan 21 2016 - 06:27:09 +1030) for ODROID-XU3
CPU: Exynos5422 @ 800 MHz Model: Odroid XU3 based on EXYNOS5422 Board: Odroid XU3 based on EXYNOS5422 Type: xu4 DRAM: 2 GiB MMC: EXYNOS DWMMC: 0, EXYNOS DWMMC: 1 *** Warning - bad CRC, using default environment
In: serial Out: serial Err: serial Net: No ethernet found. Hit any key to stop autoboot: 0 ODROID-XU3 # ODROID-XU3 # ODROID-XU3 # ODROID-XU3 # setenv usbethaddr 00:1e:06:31:06:b3 ODROID-XU3 # saveenv
You ran saveenv, so usbethaddr is now in permanent storage. That's why 'reset' won't help you.
But I need to set common mac address so that I will get single IP. I don't need random mac address.
Any way thanks for your input.
That was just a comment /wrt your observation that the board stops booting and reset doesn't fix it ;-)
Saving Environment to MMC... Writing to MMC(0)... done ODROID-XU3 # usb info USB is stopped. Please issue 'usb start' first. ODROID-XU3 # usb start starting USB... USB0: USB EHCI 1.00 USB1: Register 2000140 NbrPorts 2 Starting the controller USB XHCI 1.00 USB2: Register 2000140 NbrPorts 2 Starting the controller USB XHCI 1.00 scanning bus 0 for devices... 1 USB Device(s) found scanning bus 1 for devices... Device not responding to set address.
USB device not accepting new address (error=80000000)This error looks suspicious.
I had another wireless mouse and USB to Ethernet adapter connected to the board may be it's not getting recognized at that moment.
Any way thanks for you input.
Looks like something might be afoot with the controller itself ?
2 USB Device(s) found scanning bus 2 for devices... 2 USB Device(s) found
scanning usb for ethernet devices... 1 Ethernet Device(s) found[...]
Well I have tested the TFTP booting functionality of the board and it was success. Fell free to add my tested by for this version.
Tested-by: Anand Moon linux.amoon@gmail.com
Excellent, thanks!