14 Feb
2015
14 Feb
'15
7:03 p.m.
Hi Marco,
On Fri, Feb 13, 2015 at 5:08 PM, Fabio Estevam festevam@gmail.com wrote:
You could try this patch to have debug output from SPL: http://git.denx.de/?p=u-boot.git;a=commitdiff;h=950eaf6230496585e72ebb965c45...
Make sure you have DEBUG and CONFIG_SPL_SERIAL_SUPPORT enabled.
Also, double check the DDR initialization for your board.
Another thing you should check if is if you need this patch for your board: http://git.denx.de/?p=u-boot/u-boot-imx.git;a=commitdiff;h=7a086037071401ee7...
,and then define CONFIG_SYS_MXS_VDD5V_ONLY on your board config file.