On Monday 30 January 2017 08:45 PM, Roger Quadros wrote:
PRU ethernet MAC address range is present in the board EEPROM. Parse it and setup eth?addr environment variables.
Signed-off-by: Roger Quadros rogerq@ti.com
board/ti/ks2_evm/board_k2g.c | 19 +++++++++++++++++++ configs/k2g_evm_defconfig | 2 ++ 2 files changed, 21 insertions(+)
diff --git a/board/ti/ks2_evm/board_k2g.c b/board/ti/ks2_evm/board_k2g.c index 40edbaa..a738dd2 100644 --- a/board/ti/ks2_evm/board_k2g.c +++ b/board/ti/ks2_evm/board_k2g.c @@ -12,6 +12,7 @@ #include <asm/arch/psc_defs.h> #include <asm/arch/mmc_host_def.h> #include "mux-k2g.h" +#include "../common/board_detect.h"
#define SYS_CLK 24000000
@@ -149,6 +150,24 @@ int board_early_init_f(void) } #endif
+#ifdef CONFIG_BOARD_LATE_INIT +int board_late_init(void) +{ +#if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_TI_I2C_BOARD_DETECT)
- int rc;
- rc = ti_i2c_eeprom_am_get(CONFIG_EEPROM_BUS_ADDRESS,
CONFIG_EEPROM_CHIP_ADDRESS);- if (rc)
printf("ti_i2c_eeprom_init failed %d\n", rc);- board_ti_set_ethaddr(1);
+#endif
- return 0;
+} +#endif
#ifdef CONFIG_SPL_BUILD void spl_init_keystone_plls(void) { diff --git a/configs/k2g_evm_defconfig b/configs/k2g_evm_defconfig index 5251105..372e20b 100644 --- a/configs/k2g_evm_defconfig +++ b/configs/k2g_evm_defconfig @@ -3,6 +3,8 @@ CONFIG_ARCH_KEYSTONE=y CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_TARGET_K2G_EVM=y +CONFIG_EEPROM_BUS_ADDRESS=0 +CONFIG_EEPROM_CHIP_ADDRESS=0x50
This can be dropped as these are the default values. Rest looks good to me.
Reviewed-by: Lokesh Vutla lokeshvutla@ti.com
Thanks and regards, Lokesh