Add a new Kconfig option to allow PCI drivers to be used in SPL.
Signed-off-by: Simon Glass sjg@chromium.org ---
common/spl/Kconfig | 9 +++++++++ drivers/Makefile | 1 + 2 files changed, 10 insertions(+)
diff --git a/common/spl/Kconfig b/common/spl/Kconfig index 3c33c9e..0c83ff1 100644 --- a/common/spl/Kconfig +++ b/common/spl/Kconfig @@ -378,6 +378,15 @@ config SPL_ONENAND_SUPPORT load U-Boot from supported devices. This enables the drivers in drivers/mtd/onenand as part of an SPL build.
+config SPL_PCI_SUPPORT + bool "Support PCI drivers" + depends on SPL + help + Enable support for PCI in SPL. For platforms that need PCI to boot, + or must perform some init using PCI in SPL, this provides the + necessary driver support. This enables the drivers in drivers/pci + as part of an SPL build. + config SPL_POST_MEM_SUPPORT bool "Support POST drivers" depends on SPL diff --git a/drivers/Makefile b/drivers/Makefile index b4fd0c4..ae3c76a 100644 --- a/drivers/Makefile +++ b/drivers/Makefile @@ -33,6 +33,7 @@ obj-$(CONFIG_SPL_DMA_SUPPORT) += dma/ obj-$(CONFIG_SPL_ETH_SUPPORT) += net/ obj-$(CONFIG_SPL_ETH_SUPPORT) += net/phy/ obj-$(CONFIG_SPL_USBETH_SUPPORT) += net/phy/ +obj-$(CONFIG_SPL_PCI_SUPPORT) += pci/ obj-$(CONFIG_SPL_MUSB_NEW_SUPPORT) += usb/musb-new/ obj-$(CONFIG_SPL_USBETH_SUPPORT) += usb/gadget/ obj-$(CONFIG_SPL_WATCHDOG_SUPPORT) += watchdog/