André Schwarz andre.schwarz@matrix-vision.de wrote on 2010/10/22 21:25:34:
On Fri, 2010-10-22 at 16:56 +0200, Joakim Tjernlund wrote:
André Schwarz andre.schwarz@matrix-vision.de wrote on 2010/10/22 16:30:49:
Joakim,
your commit d1e0b10accdbac2e0a8b2cbf7c589645442f87c5 renders my MPC8377 based board unbootable.
Two weeks ago I got this after power on :
U-Boot 2010.09-00486-gfda6278-dirty (Oct 22 2010 - 16:19:20) MPC83XX
Reset Status:
CPU: e300c4, MPC8377, Rev: 2.1 at 533.333 MHz, CSB: 266.667 MHz Board: Matrix Vision MergerBox ....
After rebasing my work to current master completely silences the serial line and the CPU doesn't come up. Bisection leads to your patch.
reverting it makes the board work again.
Any ideas ?
Yes, the problem is else where. This code runs after relocation to RAM. I had a similar problem and the reason was the patch: "powerpc: Remove warm reset entry point"
hmm, ok. But what's the root cause ?
Not sure, I think my board still use 0x110 as boot entry
Try sticking 4 nop's right after _start: in start.S
... and why should this work ? Has this something to do with trial and error ?
yes, see above.
Can you shed some light on this ?
not much, can you? Did the extra nop's make any difference?
Jocke