Re: [U-Boot] [PATCH 1/2] Move all command code into its own directory

Hello Simon,

Am 18.01.2016 um 04:53 schrieb Simon Glass:

There are a lot of unrelated files in common, including all of the commands. Moving them into their own directory makes them easier to find and is more logical.

Some commands include non-command code, such as cmd_scsi.c. This should be sorted out at some point so that the function can be enabled with or without the associated command.

Unfortunately, with m68k I get this error:

m68k: + M5329AFEE +arch/m68k/cpu/mcf532x/start.o: In function `_start': +arch/m68k/cpu/mcf532x/start.S:159:(.text+0x452): relocation truncated to fit: R_68K_PC16 against symbol `board_init_f' defined in .text.board_init_f section in common/built-in.o

I hope someone can shed some light on what this means. I hope it isn't depending on the position of code in the image.

Signed-off-by: Simon Glass sjg@chromium.org

Thanks!

Reviewed-by: Heiko Schocher hs@denx.de

bye, Heiko

Kconfig | 2 + Makefile | 1 + cmd/Kconfig | 585 +++++++++++++++++++++++++++++++ cmd/Makefile | 166 +++++++++ {common => cmd}/cmd_aes.c | 0 {common => cmd}/cmd_ambapp.c | 0 {common => cmd}/cmd_armflash.c | 0 {common => cmd}/cmd_bdinfo.c | 0 {common => cmd}/cmd_bedbug.c | 0 {common => cmd}/cmd_blob.c | 0 {common => cmd}/cmd_bmp.c | 0 {common => cmd}/cmd_boot.c | 0 {common => cmd}/cmd_bootldr.c | 0 {common => cmd}/cmd_bootm.c | 0 {common => cmd}/cmd_bootmenu.c | 0 {common => cmd}/cmd_bootstage.c | 0 {common => cmd}/cmd_cache.c | 0 {common => cmd}/cmd_cbfs.c | 0 {common => cmd}/cmd_clk.c | 0 {common => cmd}/cmd_console.c | 0 {common => cmd}/cmd_cplbinfo.c | 0 {common => cmd}/cmd_cpu.c | 0 {common => cmd}/cmd_cramfs.c | 0 {common => cmd}/cmd_dataflash_mmc_mux.c | 0 {common => cmd}/cmd_date.c | 0 {common => cmd}/cmd_dcr.c | 0 {common => cmd}/cmd_demo.c | 0 {common => cmd}/cmd_dfu.c | 0 {common => cmd}/cmd_diag.c | 0 {common => cmd}/cmd_disk.c | 0 {common => cmd}/cmd_display.c | 0 {common => cmd}/cmd_dtt.c | 0 {common => cmd}/cmd_echo.c | 0 {common => cmd}/cmd_eeprom.c | 0 {common => cmd}/cmd_efi.c | 0 {common => cmd}/cmd_elf.c | 0 {common => cmd}/cmd_ethsw.c | 0 {common => cmd}/cmd_exit.c | 0 {common => cmd}/cmd_ext2.c | 0 {common => cmd}/cmd_ext4.c | 0 {common => cmd}/cmd_fastboot.c | 0 {common => cmd}/cmd_fat.c | 0 {common => cmd}/cmd_fdc.c | 0 {common => cmd}/cmd_fdt.c | 0 {common => cmd}/cmd_fitupd.c | 0 {common => cmd}/cmd_flash.c | 0 {common => cmd}/cmd_fpga.c | 0 {common => cmd}/cmd_fpgad.c | 0 {common => cmd}/cmd_fs.c | 0 {common => cmd}/cmd_fs_uuid.c | 0 {common => cmd}/cmd_fuse.c | 0 {common => cmd}/cmd_gettime.c | 0 {common => cmd}/cmd_gpio.c | 0 {common => cmd}/cmd_gpt.c | 0 {common => cmd}/cmd_hash.c | 0 {common => cmd}/cmd_help.c | 0 {common => cmd}/cmd_host.c | 0 {common => cmd}/cmd_i2c.c | 0 {common => cmd}/cmd_ide.c | 0 {common => cmd}/cmd_immap.c | 0 {common => cmd}/cmd_ini.c | 0 {common => cmd}/cmd_io.c | 0 {common => cmd}/cmd_iotrace.c | 0 {common => cmd}/cmd_irq.c | 0 {common => cmd}/cmd_itest.c | 0 {common => cmd}/cmd_jffs2.c | 0 {common => cmd}/cmd_ldrinfo.c | 0 {common => cmd}/cmd_led.c | 0 {common => cmd}/cmd_license.c | 0 {common => cmd}/cmd_load.c | 0 {common => cmd}/cmd_log.c | 0 {common => cmd}/cmd_lzmadec.c | 0 {common => cmd}/cmd_mac.c | 0 {common => cmd}/cmd_md5sum.c | 0 {common => cmd}/cmd_mdio.c | 0 {common => cmd}/cmd_mem.c | 0 {common => cmd}/cmd_mfsl.c | 0 {common => cmd}/cmd_mii.c | 0 {common => cmd}/cmd_misc.c | 0 {common => cmd}/cmd_mmc.c | 0 {common => cmd}/cmd_mmc_spi.c | 0 {common => cmd}/cmd_mp.c | 0 {common => cmd}/cmd_mtdparts.c | 0 {common => cmd}/cmd_nand.c | 0 {common => cmd}/cmd_net.c | 0 {common => cmd}/cmd_nvedit.c | 0 {common => cmd}/cmd_onenand.c | 0 {common => cmd}/cmd_otp.c | 0 {common => cmd}/cmd_part.c | 0 {common => cmd}/cmd_pci.c | 0 {common => cmd}/cmd_pcmcia.c | 0 {common => cmd}/cmd_pmic.c | 0 {common => cmd}/cmd_portio.c | 0 {common => cmd}/cmd_pxe.c | 0 {common => cmd}/cmd_read.c | 0 {common => cmd}/cmd_reginfo.c | 0 {common => cmd}/cmd_regulator.c | 0 {common => cmd}/cmd_reiser.c | 0 {common => cmd}/cmd_remoteproc.c | 0 {common => cmd}/cmd_sata.c | 0 {common => cmd}/cmd_scsi.c | 0 {common => cmd}/cmd_setexpr.c | 0 {common => cmd}/cmd_sf.c | 0 {common => cmd}/cmd_sha1sum.c | 0 {common => cmd}/cmd_softswitch.c | 0 {common => cmd}/cmd_sound.c | 0 {common => cmd}/cmd_source.c | 0 {common => cmd}/cmd_spi.c | 0 {common => cmd}/cmd_spibootldr.c | 0 {common => cmd}/cmd_spl.c | 0 {common => cmd}/cmd_strings.c | 0 {common => cmd}/cmd_terminal.c | 0 {common => cmd}/cmd_test.c | 0 {common => cmd}/cmd_thordown.c | 0 {common => cmd}/cmd_time.c | 0 {common => cmd}/cmd_tpm.c | 0 {common => cmd}/cmd_tpm_test.c | 0 {common => cmd}/cmd_trace.c | 0 {common => cmd}/cmd_tsi148.c | 0 {common => cmd}/cmd_ubi.c | 0 {common => cmd}/cmd_ubifs.c | 0 {common => cmd}/cmd_universe.c | 0 {common => cmd}/cmd_unzip.c | 0 {common => cmd}/cmd_usb.c | 0 {common => cmd}/cmd_usb_mass_storage.c | 0 {common => cmd}/cmd_version.c | 0 {common => cmd}/cmd_ximg.c | 0 {common => cmd}/cmd_yaffs2.c | 0 {common => cmd}/cmd_zfs.c | 0 {common => cmd}/cmd_zip.c | 0 common/Kconfig | 586 -------------------------------- common/Makefile | 156 +-------- scripts/Makefile.spl | 2 +- 133 files changed, 761 insertions(+), 737 deletions(-) create mode 100644 cmd/Kconfig create mode 100644 cmd/Makefile rename {common => cmd}/cmd_aes.c (100%) rename {common => cmd}/cmd_ambapp.c (100%) rename {common => cmd}/cmd_armflash.c (100%) rename {common => cmd}/cmd_bdinfo.c (100%) rename {common => cmd}/cmd_bedbug.c (100%) rename {common => cmd}/cmd_blob.c (100%) rename {common => cmd}/cmd_bmp.c (100%) rename {common => cmd}/cmd_boot.c (100%) rename {common => cmd}/cmd_bootldr.c (100%) rename {common => cmd}/cmd_bootm.c (100%) rename {common => cmd}/cmd_bootmenu.c (100%) rename {common => cmd}/cmd_bootstage.c (100%) rename {common => cmd}/cmd_cache.c (100%) rename {common => cmd}/cmd_cbfs.c (100%) rename {common => cmd}/cmd_clk.c (100%) rename {common => cmd}/cmd_console.c (100%) rename {common => cmd}/cmd_cplbinfo.c (100%) rename {common => cmd}/cmd_cpu.c (100%) rename {common => cmd}/cmd_cramfs.c (100%) rename {common => cmd}/cmd_dataflash_mmc_mux.c (100%) rename {common => cmd}/cmd_date.c (100%) rename {common => cmd}/cmd_dcr.c (100%) rename {common => cmd}/cmd_demo.c (100%) rename {common => cmd}/cmd_dfu.c (100%) rename {common => cmd}/cmd_diag.c (100%) rename {common => cmd}/cmd_disk.c (100%) rename {common => cmd}/cmd_display.c (100%) rename {common => cmd}/cmd_dtt.c (100%) rename {common => cmd}/cmd_echo.c (100%) rename {common => cmd}/cmd_eeprom.c (100%) rename {common => cmd}/cmd_efi.c (100%) rename {common => cmd}/cmd_elf.c (100%) rename {common => cmd}/cmd_ethsw.c (100%) rename {common => cmd}/cmd_exit.c (100%) rename {common => cmd}/cmd_ext2.c (100%) rename {common => cmd}/cmd_ext4.c (100%) rename {common => cmd}/cmd_fastboot.c (100%) rename {common => cmd}/cmd_fat.c (100%) rename {common => cmd}/cmd_fdc.c (100%) rename {common => cmd}/cmd_fdt.c (100%) rename {common => cmd}/cmd_fitupd.c (100%) rename {common => cmd}/cmd_flash.c (100%) rename {common => cmd}/cmd_fpga.c (100%) rename {common => cmd}/cmd_fpgad.c (100%) rename {common => cmd}/cmd_fs.c (100%) rename {common => cmd}/cmd_fs_uuid.c (100%) rename {common => cmd}/cmd_fuse.c (100%) rename {common => cmd}/cmd_gettime.c (100%) rename {common => cmd}/cmd_gpio.c (100%) rename {common => cmd}/cmd_gpt.c (100%) rename {common => cmd}/cmd_hash.c (100%) rename {common => cmd}/cmd_help.c (100%) rename {common => cmd}/cmd_host.c (100%) rename {common => cmd}/cmd_i2c.c (100%) rename {common => cmd}/cmd_ide.c (100%) rename {common => cmd}/cmd_immap.c (100%) rename {common => cmd}/cmd_ini.c (100%) rename {common => cmd}/cmd_io.c (100%) rename {common => cmd}/cmd_iotrace.c (100%) rename {common => cmd}/cmd_irq.c (100%) rename {common => cmd}/cmd_itest.c (100%) rename {common => cmd}/cmd_jffs2.c (100%) rename {common => cmd}/cmd_ldrinfo.c (100%) rename {common => cmd}/cmd_led.c (100%) rename {common => cmd}/cmd_license.c (100%) rename {common => cmd}/cmd_load.c (100%) rename {common => cmd}/cmd_log.c (100%) rename {common => cmd}/cmd_lzmadec.c (100%) rename {common => cmd}/cmd_mac.c (100%) rename {common => cmd}/cmd_md5sum.c (100%) rename {common => cmd}/cmd_mdio.c (100%) rename {common => cmd}/cmd_mem.c (100%) rename {common => cmd}/cmd_mfsl.c (100%) rename {common => cmd}/cmd_mii.c (100%) rename {common => cmd}/cmd_misc.c (100%) rename {common => cmd}/cmd_mmc.c (100%) rename {common => cmd}/cmd_mmc_spi.c (100%) rename {common => cmd}/cmd_mp.c (100%) rename {common => cmd}/cmd_mtdparts.c (100%) rename {common => cmd}/cmd_nand.c (100%) rename {common => cmd}/cmd_net.c (100%) rename {common => cmd}/cmd_nvedit.c (100%) rename {common => cmd}/cmd_onenand.c (100%) rename {common => cmd}/cmd_otp.c (100%) rename {common => cmd}/cmd_part.c (100%) rename {common => cmd}/cmd_pci.c (100%) rename {common => cmd}/cmd_pcmcia.c (100%) rename {common => cmd}/cmd_pmic.c (100%) rename {common => cmd}/cmd_portio.c (100%) rename {common => cmd}/cmd_pxe.c (100%) rename {common => cmd}/cmd_read.c (100%) rename {common => cmd}/cmd_reginfo.c (100%) rename {common => cmd}/cmd_regulator.c (100%) rename {common => cmd}/cmd_reiser.c (100%) rename {common => cmd}/cmd_remoteproc.c (100%) rename {common => cmd}/cmd_sata.c (100%) rename {common => cmd}/cmd_scsi.c (100%) rename {common => cmd}/cmd_setexpr.c (100%) rename {common => cmd}/cmd_sf.c (100%) rename {common => cmd}/cmd_sha1sum.c (100%) rename {common => cmd}/cmd_softswitch.c (100%) rename {common => cmd}/cmd_sound.c (100%) rename {common => cmd}/cmd_source.c (100%) rename {common => cmd}/cmd_spi.c (100%) rename {common => cmd}/cmd_spibootldr.c (100%) rename {common => cmd}/cmd_spl.c (100%) rename {common => cmd}/cmd_strings.c (100%) rename {common => cmd}/cmd_terminal.c (100%) rename {common => cmd}/cmd_test.c (100%) rename {common => cmd}/cmd_thordown.c (100%) rename {common => cmd}/cmd_time.c (100%) rename {common => cmd}/cmd_tpm.c (100%) rename {common => cmd}/cmd_tpm_test.c (100%) rename {common => cmd}/cmd_trace.c (100%) rename {common => cmd}/cmd_tsi148.c (100%) rename {common => cmd}/cmd_ubi.c (100%) rename {common => cmd}/cmd_ubifs.c (100%) rename {common => cmd}/cmd_universe.c (100%) rename {common => cmd}/cmd_unzip.c (100%) rename {common => cmd}/cmd_usb.c (100%) rename {common => cmd}/cmd_usb_mass_storage.c (100%) rename {common => cmd}/cmd_version.c (100%) rename {common => cmd}/cmd_ximg.c (100%) rename {common => cmd}/cmd_yaffs2.c (100%) rename {common => cmd}/cmd_zfs.c (100%) rename {common => cmd}/cmd_zip.c (100%)

diff --git a/Kconfig b/Kconfig index 821b464..d5e503a 100644 --- a/Kconfig +++ b/Kconfig @@ -224,6 +224,8 @@ endmenu # Boot images

source "common/Kconfig"

+source "cmd/Kconfig"

• source "dts/Kconfig"

  source "net/Kconfig"

diff --git a/Makefile b/Makefile index 5882c30..6a67efb 100644 --- a/Makefile +++ b/Makefile @@ -667,6 +667,7 @@ libs-y += drivers/usb/musb/ libs-y += drivers/usb/musb-new/ libs-y += drivers/usb/phy/ libs-y += drivers/usb/ulpi/ +libs-y += cmd/ libs-y += common/ libs-$(CONFIG_API) += api/ libs-$(CONFIG_HAS_POST) += post/ diff --git a/cmd/Kconfig b/cmd/Kconfig new file mode 100644 index 0000000..2ed0263 --- /dev/null +++ b/cmd/Kconfig @@ -0,0 +1,585 @@ +menu "Command line interface"

+config HUSH_PARSER

• bool "Use hush shell"
• select SYS_HUSH_PARSER
• help

•  This option enables the "hush" shell (from Busybox) as command line
  

•  interpreter, thus enabling powerful command line syntax like
  

•  if...then...else...fi conditionals or `&&' and '||'
  

•  constructs ("shell scripts").
  

•  If disabled, you get the old, much simpler behaviour with a somewhat
  

•  smaller memory footprint.
  

+config SYS_HUSH_PARSER

• bool
• help

•  Backward compatibility.
  

+config SYS_PROMPT

• string "Shell prompt"
• default "=> "
• help

•  This string is displayed in the command line to the left of the
  

•  cursor.
  

+menu "Autoboot options"

+config AUTOBOOT_KEYED

• bool "Stop autobooting via specific input key / string"
• default n
• help

•  This option enables stopping (aborting) of the automatic
  

•  boot feature only by issuing a specific input key or
  

•  string. If not enabled, any input key will abort the
  

•  U-Boot automatic booting process and bring the device
  

•  to the U-Boot prompt for user input.
  

+config AUTOBOOT_PROMPT

• string "Autoboot stop prompt"
• depends on AUTOBOOT_KEYED
• default "Autoboot in %d seconds\n"
• help

•  This string is displayed before the boot delay selected by
  

•  CONFIG_BOOTDELAY starts. If it is not defined	there is no
  

•  output indicating that autoboot is in progress.
  

•  Note that this define is used as the (only) argument to a
  

•  printf() call, so it may contain '%' format specifications,
  

•  provided that it also includes, sepearated by commas exactly
  

•  like in a printf statement, the required arguments. It is
  

•  the responsibility of the user to select only such arguments
  

•  that are valid in the given context.
  

+config AUTOBOOT_ENCRYPTION

• bool "Enable encryption in autoboot stopping"
• depends on AUTOBOOT_KEYED
• default n

+config AUTOBOOT_DELAY_STR

• string "Delay autobooting via specific input key / string"
• depends on AUTOBOOT_KEYED && !AUTOBOOT_ENCRYPTION
• help

•  This option delays the automatic boot feature by issuing
  

•  a specific input key or string. If CONFIG_AUTOBOOT_DELAY_STR
  

•  or the environment variable "bootdelaykey" is specified
  

•  and this string is received from console input before
  

•  autoboot starts booting, U-Boot gives a command prompt. The
  

•  U-Boot prompt will time out if CONFIG_BOOT_RETRY_TIME is
  

•  used, otherwise it never times out.
  

+config AUTOBOOT_STOP_STR

• string "Stop autobooting via specific input key / string"
• depends on AUTOBOOT_KEYED && !AUTOBOOT_ENCRYPTION
• help

•  This option enables stopping (aborting) of the automatic
  

•  boot feature only by issuing a specific input key or
  

•  string. If CONFIG_AUTOBOOT_STOP_STR or the environment
  

•  variable "bootstopkey" is specified and this string is
  

•  received from console input before autoboot starts booting,
  

•  U-Boot gives a command prompt. The U-Boot prompt never
  

•  times out, even if CONFIG_BOOT_RETRY_TIME is used.
  

+config AUTOBOOT_KEYED_CTRLC

• bool "Enable Ctrl-C autoboot interruption"
• depends on AUTOBOOT_KEYED && !AUTOBOOT_ENCRYPTION
• default n
• help

•  This option allows for the boot sequence to be interrupted
  

•  by ctrl-c, in addition to the "bootdelaykey" and "bootstopkey".
  

•  Setting this variable	provides an escape sequence from the
  

•  limited "password" strings.
  

+config AUTOBOOT_STOP_STR_SHA256

• string "Stop autobooting via SHA256 encrypted password"
• depends on AUTOBOOT_KEYED && AUTOBOOT_ENCRYPTION
• help

•  This option adds the feature to only stop the autobooting,
  

•  and therefore boot into the U-Boot prompt, when the input
  

•  string / password matches a values that is encypted via
  

•  a SHA256 hash and saved in the environment.
  

+endmenu

+comment "Commands"

+menu "Info commands"

+config CMD_BDI

• bool "bdinfo"
• default y
• help

•  Print board info
  

+config CMD_CONSOLE

• bool "coninfo"
• default y
• help

•  Print console devices and information.
  

+config CMD_CPU

• bool "cpu"
• help

•  Print information about available CPUs. This normally shows the
  

•  number of CPUs, type (e.g. manufacturer, architecture, product or
  

•  internal name) and clock frequency. Other information may be
  

•  available depending on the CPU driver.
  

+config CMD_LICENSE

• bool "license"
• help

•  Print GPL license text
  

+endmenu

+menu "Boot commands"

+config CMD_BOOTD

• bool "bootd"
• default y
• help

•  Run the command stored in the environment "bootcmd", i.e.
  

•  "bootd" does the same thing as "run bootcmd".
  

+config CMD_BOOTM

• bool "bootm"
• default y
• help

•  Boot an application image from the memory.
  

+config CMD_ELF

• bool "bootelf, bootvx"
• default y
• help

•  Boot an ELF/vxWorks image from the memory.
  

+config CMD_GO

• bool "go"
• default y
• help

•  Start an application at a given address.
  

+config CMD_RUN

• bool "run"
• default y
• help

•  Run the command in the given environment variable.
  

+config CMD_IMI

• bool "iminfo"
• default y
• help

•  Print header information for application image.
  

+config CMD_IMLS

• bool "imls"
• default y
• help

•  List all images found in flash
  

+config CMD_XIMG

• bool "imxtract"
• default y
• help

•  Extract a part of a multi-image.
  

+config CMD_POWEROFF

• bool

+endmenu

+menu "Environment commands"

+config CMD_EXPORTENV

• bool "env export"
• default y
• help

•  Export environments.
  

+config CMD_IMPORTENV

• bool "env import"
• default y
• help

•  Import environments.
  

+config CMD_EDITENV

• bool "editenv"
• default y
• help

•  Edit environment variable.
  

+config CMD_SAVEENV

• bool "saveenv"
• default y
• help

•  Save all environment variables into the compiled-in persistent
  

•  storage.
  

+config CMD_ENV_EXISTS

• bool "env exists"
• default y
• help

•  Check if a variable is defined in the environment for use in
  

•  shell scripting.
  

+endmenu

+menu "Memory commands"

+config CMD_MEMORY

• bool "md, mm, nm, mw, cp, cmp, base, loop"
• default y
• help

•  Memeory commands.
  

•    md - memory display
  

•    mm - memory modify (auto-incrementing address)
  

•    nm - memory modify (constant address)
  

•    mw - memory write (fill)
  

•    cp - memory copy
  

•    cmp - memory compare
  

•    base - print or set address offset
  

•    loop - initinite loop on address range
  

+config CMD_CRC32

• bool "crc32"
• default y
• help

•  Compute CRC32.
  

+config LOOPW

• bool "loopw"
• help

•  Infinite write loop on address range
  

+config CMD_MEMTEST

• bool "memtest"
• help

•  Simple RAM read/write test.
  

+config CMD_MX_CYCLIC

• bool "mdc, mwc"
• help

•  mdc - memory display cyclic
  

•  mwc - memory write cyclic
  

+config CMD_MEMINFO

• bool "meminfo"
• help

•  Display memory information.
  

+endmenu

+menu "Device access commands"

+config CMD_DM

• bool "dm - Access to driver model information"
• depends on DM
• default y
• help

•  Provides access to driver model data structures and information,
  

•  such as a list of devices, list of uclasses and the state of each
  

•  device (e.g. activated). This is not required for operation, but
  

•  can be useful to see the state of driver model for debugging or
  

•  interest.
  

+config CMD_DEMO

• bool "demo - Demonstration commands for driver model"
• depends on DM
• help

•  Provides a 'demo' command which can be used to play around with
  

•  driver model. To use this properly you will need to enable one or
  

•  both of the demo devices (DM_DEMO_SHAPE and DM_DEMO_SIMPLE).
  

•  Otherwise you will always get an empty list of devices. The demo
  

•  devices are defined in the sandbox device tree, so the easiest
  

•  option is to use sandbox and pass the -d point to sandbox's
  

•  u-boot.dtb file.
  

+config CMD_LOADB

• bool "loadb"
• default y
• help

•  Load a binary file over serial line.
  

+config CMD_LOADS

• bool "loads"
• default y
• help

•  Load an S-Record file over serial line
  

+config CMD_FLASH

• bool "flinfo, erase, protect"
• default y
• help

•  NOR flash support.
  

•    flinfo - print FLASH memory information
  

•    erase - FLASH memory
  

•    protect - enable or disable FLASH write protection
  

+config CMD_ARMFLASH

• depends on FLASH_CFI_DRIVER
• bool "armflash"
• help

•  ARM Ltd reference designs flash partition access
  

+config CMD_NAND

• bool "nand"
• help

•  NAND support.
  

+config CMD_SF

• bool "sf"
• help

•  SPI Flash support
  

+config CMD_SPI

• bool "sspi"
• help

•  SPI utility command.
  

+config CMD_I2C

• bool "i2c"
• help

•  I2C support.
  

+config CMD_USB

• bool "usb"
• help

•  USB support.
  

+config CMD_FPGA

• bool "fpga"
• default y
• help

•  FPGA support.
  

+config CMD_REMOTEPROC

• bool "remoteproc"
• depends on REMOTEPROC
• help

•  Support for Remote Processor control
  

+config CMD_GPIO

• bool "gpio"
• help

•  GPIO support.
  

+endmenu

+menu "Shell scripting commands"

+config CMD_ECHO

• bool "echo"
• default y
• help

•  Echo args to console
  

+config CMD_ITEST

• bool "itest"
• default y
• help

•  Return true/false on integer compare.
  

+config CMD_SOURCE

• bool "source"
• default y
• help

•  Run script from memory
  

+config CMD_SETEXPR

• bool "setexpr"
• default y
• help

•  Evaluate boolean and math expressions and store the result in an env
  

•    variable.
  

•  Also supports loading the value at a memory location into a variable.
  

•  If CONFIG_REGEX is enabled, setexpr also supports a gsub function.
  

+endmenu

+menu "Network commands"

+config CMD_NET

• bool "bootp, tftpboot"

•    select NET
  

• default y
• help

•  Network commands.
  

•  bootp - boot image via network using BOOTP/TFTP protocol
  

•  tftpboot - boot image via network using TFTP protocol
  

+config CMD_TFTPPUT

• bool "tftp put"
• help

•  TFTP put command, for uploading files to a server
  

+config CMD_TFTPSRV

• bool "tftpsrv"
• help

•  Act as a TFTP server and boot the first received file
  

+config CMD_RARP

• bool "rarpboot"
• help

•  Boot image via network using RARP/TFTP protocol
  

+config CMD_DHCP

• bool "dhcp"
• help

•  Boot image via network using DHCP/TFTP protocol
  

+config CMD_NFS

• bool "nfs"
• default y
• help

•  Boot image via network using NFS protocol.
  

+config CMD_PING

• bool "ping"
• help

•  Send ICMP ECHO_REQUEST to network host
  

+config CMD_CDP

• bool "cdp"
• help

•  Perform CDP network configuration
  

+config CMD_SNTP

• bool "sntp"
• help

•  Synchronize RTC via network
  

+config CMD_DNS

• bool "dns"
• help

•  Lookup the IP of a hostname
  

+config CMD_LINK_LOCAL

• bool "linklocal"
• help

•  Acquire a network IP address using the link-local protocol
  

+endmenu

+menu "Misc commands"

+config CMD_AMBAPP

• bool "ambapp"
• depends on LEON3
• default y
• help

•  Lists AMBA Plug-n-Play information.
  

+config SYS_AMBAPP_PRINT_ON_STARTUP

• bool "Show AMBA PnP info on startup"
• depends on CMD_AMBAPP
• default n
• help

•  Show AMBA Plug-n-Play information on startup.
  

+config CMD_TIME

• bool "time"
• help

•  Run commands and summarize execution time.
  

+# TODO: rename to CMD_SLEEP +config CMD_MISC

• bool "sleep"
• default y
• help

•  Delay execution for some time
  

+config CMD_TIMER

• bool "timer"
• help

•  Access the system timer.
  

+config CMD_SETGETDCR

• bool "getdcr, setdcr, getidcr, setidcr"
• depends on 4xx
• default y
• help

•  getdcr - Get an AMCC PPC 4xx DCR's value
  

•  setdcr - Set an AMCC PPC 4xx DCR's value
  

•  getidcr - Get a register value via indirect DCR addressing
  

•  setidcr - Set a register value via indirect DCR addressing
  

+config CMD_SOUND

• bool "sound"
• depends on SOUND
• help

•  This provides basic access to the U-Boot's sound support. The main
  

•  feature is to play a beep.
  

•     sound init   - set up sound system
  

•     sound play   - play a sound
  

+endmenu

+config CMD_BOOTSTAGE

• bool "Enable the 'bootstage' command"
• depends on BOOTSTAGE
• help

•  Add a 'bootstage' command which supports printing a report
  

•  and un/stashing of bootstage data.
  

+menu "Power commands" +config CMD_PMIC

• bool "Enable Driver Model PMIC command"
• depends on DM_PMIC
• help

•  This is the pmic command, based on a driver model pmic's API.
  

•  Command features are unchanged:
  

•  - list               - list pmic devices
  

•  - pmic dev <id>      - show or [set] operating pmic device (NEW)
  

•  - pmic dump          - dump registers
  

•  - pmic read address  - read byte of register at address
  

•  - pmic write address - write byte to register at address
  

•  The only one change for this command is 'dev' subcommand.
  

+config CMD_REGULATOR

• bool "Enable Driver Model REGULATOR command"
• depends on DM_REGULATOR
• help

•  This command is based on driver model regulator's API.
  

•  User interface features:
  

•  - list               - list regulator devices
  

•  - regulator dev <id> - show or [set] operating regulator device
  

•  - regulator info     - print constraints info
  

•  - regulator status   - print operating status
  

•  - regulator value <val] <-f> - print/[set] voltage value [uV]
  

•  - regulator current <val>    - print/[set] current value [uA]
  

•  - regulator mode <id>        - print/[set] operating mode id
  

•  - regulator enable           - enable the regulator output
  

•  - regulator disable          - disable the regulator output
  

•  The '-f' (force) option can be used for set the value which exceeds
  

•  the limits, which are found in device-tree and are kept in regulator's
  

•  uclass platdata structure.
  

+endmenu

+menu "Security commands" +config CMD_TPM

• bool "Enable the 'tpm' command"
• depends on TPM
• help

•  This provides a means to talk to a TPM from the command line. A wide
  

•  range of commands if provided - see 'tpm help' for details. The
  

•  command requires a suitable TPM on your board and the correct driver
  

•  must be enabled.
  

+config CMD_TPM_TEST

• bool "Enable the 'tpm test' command"
• depends on CMD_TPM
• help

•  This provides a a series of tests to confirm that the TPM is working
  

•  correctly. The tests cover initialisation, non-volatile RAM, extend,
  

•  global lock and checking that timing is within expectations. The
  

•  tests pass correctly on Infineon TPMs but may need to be adjusted
  

•  for other devices.
  

+endmenu

+endmenu diff --git a/cmd/Makefile b/cmd/Makefile new file mode 100644 index 0000000..880a886 --- /dev/null +++ b/cmd/Makefile @@ -0,0 +1,166 @@ +# +# (C) Copyright 2004-2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# SPDX-License-Identifier: GPL-2.0+ +#

+ifndef CONFIG_SPL_BUILD +# core command +obj-y += cmd_boot.o +obj-$(CONFIG_CMD_BOOTM) += cmd_bootm.o +obj-y += cmd_help.o +obj-y += cmd_version.o

+# command +obj-$(CONFIG_CMD_AES) += cmd_aes.o +obj-$(CONFIG_CMD_AMBAPP) += cmd_ambapp.o +obj-$(CONFIG_CMD_ARMFLASH) += cmd_armflash.o +obj-$(CONFIG_SOURCE) += cmd_source.o +obj-$(CONFIG_CMD_SOURCE) += cmd_source.o +obj-$(CONFIG_CMD_BDI) += cmd_bdinfo.o +obj-$(CONFIG_CMD_BEDBUG) += cmd_bedbug.o +obj-$(CONFIG_CMD_BMP) += cmd_bmp.o +obj-$(CONFIG_CMD_BOOTMENU) += cmd_bootmenu.o +obj-$(CONFIG_CMD_BOOTLDR) += cmd_bootldr.o +obj-$(CONFIG_CMD_BOOTSTAGE) += cmd_bootstage.o +obj-$(CONFIG_CMD_CACHE) += cmd_cache.o +obj-$(CONFIG_CMD_CBFS) += cmd_cbfs.o +obj-$(CONFIG_CMD_CLK) += cmd_clk.o +obj-$(CONFIG_CMD_CONSOLE) += cmd_console.o +obj-$(CONFIG_CMD_CPLBINFO) += cmd_cplbinfo.o +obj-$(CONFIG_CMD_CPU) += cmd_cpu.o +obj-$(CONFIG_DATAFLASH_MMC_SELECT) += cmd_dataflash_mmc_mux.o +obj-$(CONFIG_CMD_DATE) += cmd_date.o +obj-$(CONFIG_CMD_DEMO) += cmd_demo.o +obj-$(CONFIG_CMD_SOUND) += cmd_sound.o +ifdef CONFIG_4xx +obj-$(CONFIG_CMD_SETGETDCR) += cmd_dcr.o +endif +ifdef CONFIG_POST +obj-$(CONFIG_CMD_DIAG) += cmd_diag.o +endif +obj-$(CONFIG_CMD_DISPLAY) += cmd_display.o +obj-$(CONFIG_CMD_DTT) += cmd_dtt.o +obj-$(CONFIG_CMD_ECHO) += cmd_echo.o +obj-$(CONFIG_ENV_IS_IN_EEPROM) += cmd_eeprom.o +obj-$(CONFIG_CMD_EEPROM) += cmd_eeprom.o +obj-$(CONFIG_EFI_STUB) += cmd_efi.o +obj-$(CONFIG_CMD_ELF) += cmd_elf.o +obj-$(CONFIG_SYS_HUSH_PARSER) += cmd_exit.o +obj-$(CONFIG_CMD_EXT4) += cmd_ext4.o +obj-$(CONFIG_CMD_EXT2) += cmd_ext2.o +obj-$(CONFIG_CMD_FAT) += cmd_fat.o +obj-$(CONFIG_CMD_FDC) += cmd_fdc.o +obj-$(CONFIG_OF_LIBFDT) += cmd_fdt.o +obj-$(CONFIG_CMD_FITUPD) += cmd_fitupd.o +obj-$(CONFIG_CMD_FLASH) += cmd_flash.o +ifdef CONFIG_FPGA +obj-$(CONFIG_CMD_FPGA) += cmd_fpga.o +endif +obj-$(CONFIG_CMD_FPGAD) += cmd_fpgad.o +obj-$(CONFIG_CMD_FS_GENERIC) += cmd_fs.o +obj-$(CONFIG_CMD_FUSE) += cmd_fuse.o +obj-$(CONFIG_CMD_GETTIME) += cmd_gettime.o +obj-$(CONFIG_CMD_GPIO) += cmd_gpio.o +obj-$(CONFIG_CMD_I2C) += cmd_i2c.o +obj-$(CONFIG_CMD_IOTRACE) += cmd_iotrace.o +obj-$(CONFIG_CMD_HASH) += cmd_hash.o +obj-$(CONFIG_CMD_IDE) += cmd_ide.o +obj-$(CONFIG_CMD_IMMAP) += cmd_immap.o +obj-$(CONFIG_CMD_INI) += cmd_ini.o +obj-$(CONFIG_CMD_IRQ) += cmd_irq.o +obj-$(CONFIG_CMD_ITEST) += cmd_itest.o +obj-$(CONFIG_CMD_JFFS2) += cmd_jffs2.o +obj-$(CONFIG_CMD_CRAMFS) += cmd_cramfs.o +obj-$(CONFIG_CMD_LDRINFO) += cmd_ldrinfo.o +obj-$(CONFIG_CMD_LED) += cmd_led.o +obj-$(CONFIG_CMD_LICENSE) += cmd_license.o +obj-y += cmd_load.o +obj-$(CONFIG_LOGBUFFER) += cmd_log.o +obj-$(CONFIG_ID_EEPROM) += cmd_mac.o +obj-$(CONFIG_CMD_MD5SUM) += cmd_md5sum.o +obj-$(CONFIG_CMD_MEMORY) += cmd_mem.o +obj-$(CONFIG_CMD_IO) += cmd_io.o +obj-$(CONFIG_CMD_MFSL) += cmd_mfsl.o +obj-$(CONFIG_CMD_MII) += cmd_mii.o +ifdef CONFIG_PHYLIB +obj-$(CONFIG_CMD_MII) += cmd_mdio.o +endif +obj-$(CONFIG_CMD_MISC) += cmd_misc.o +obj-$(CONFIG_CMD_MMC) += cmd_mmc.o +obj-$(CONFIG_CMD_MMC_SPI) += cmd_mmc_spi.o +obj-$(CONFIG_MP) += cmd_mp.o +obj-$(CONFIG_CMD_MTDPARTS) += cmd_mtdparts.o +obj-$(CONFIG_CMD_NAND) += cmd_nand.o +obj-$(CONFIG_CMD_NET) += cmd_net.o +obj-$(CONFIG_CMD_ONENAND) += cmd_onenand.o +obj-$(CONFIG_CMD_OTP) += cmd_otp.o +obj-$(CONFIG_CMD_PART) += cmd_part.o +ifdef CONFIG_PCI +obj-$(CONFIG_CMD_PCI) += cmd_pci.o +endif +obj-y += cmd_pcmcia.o +obj-$(CONFIG_CMD_PORTIO) += cmd_portio.o +obj-$(CONFIG_CMD_PXE) += cmd_pxe.o +obj-$(CONFIG_CMD_READ) += cmd_read.o +obj-$(CONFIG_CMD_REGINFO) += cmd_reginfo.o +obj-$(CONFIG_CMD_REISER) += cmd_reiser.o +obj-$(CONFIG_CMD_REMOTEPROC) += cmd_remoteproc.o +obj-$(CONFIG_SANDBOX) += cmd_host.o +obj-$(CONFIG_CMD_SATA) += cmd_sata.o +obj-$(CONFIG_CMD_SF) += cmd_sf.o +obj-$(CONFIG_CMD_SCSI) += cmd_scsi.o +obj-$(CONFIG_CMD_SHA1SUM) += cmd_sha1sum.o +obj-$(CONFIG_CMD_SETEXPR) += cmd_setexpr.o +obj-$(CONFIG_CMD_SOFTSWITCH) += cmd_softswitch.o +obj-$(CONFIG_CMD_SPI) += cmd_spi.o +obj-$(CONFIG_CMD_SPIBOOTLDR) += cmd_spibootldr.o +obj-$(CONFIG_CMD_STRINGS) += cmd_strings.o +obj-$(CONFIG_CMD_TERMINAL) += cmd_terminal.o +obj-$(CONFIG_CMD_TIME) += cmd_time.o +obj-$(CONFIG_CMD_TRACE) += cmd_trace.o +obj-$(CONFIG_SYS_HUSH_PARSER) += cmd_test.o +obj-$(CONFIG_CMD_TPM) += cmd_tpm.o +obj-$(CONFIG_CMD_TPM_TEST) += cmd_tpm_test.o +obj-$(CONFIG_CMD_TSI148) += cmd_tsi148.o +obj-$(CONFIG_CMD_UBI) += cmd_ubi.o +obj-$(CONFIG_CMD_UBIFS) += cmd_ubifs.o +obj-$(CONFIG_CMD_UNIVERSE) += cmd_universe.o +obj-$(CONFIG_CMD_UNZIP) += cmd_unzip.o +ifdef CONFIG_LZMA +obj-$(CONFIG_CMD_LZMADEC) += cmd_lzmadec.o +endif

+obj-$(CONFIG_CMD_USB) += cmd_usb.o +obj-$(CONFIG_CMD_FASTBOOT) += cmd_fastboot.o +obj-$(CONFIG_CMD_FS_UUID) += cmd_fs_uuid.o

+obj-$(CONFIG_CMD_USB_MASS_STORAGE) += cmd_usb_mass_storage.o +obj-$(CONFIG_CMD_THOR_DOWNLOAD) += cmd_thordown.o +obj-$(CONFIG_CMD_XIMG) += cmd_ximg.o +obj-$(CONFIG_YAFFS2) += cmd_yaffs2.o +obj-$(CONFIG_CMD_SPL) += cmd_spl.o +obj-$(CONFIG_CMD_ZIP) += cmd_zip.o +obj-$(CONFIG_CMD_ZFS) += cmd_zfs.o

+obj-$(CONFIG_CMD_DFU) += cmd_dfu.o +obj-$(CONFIG_CMD_GPT) += cmd_gpt.o +obj-$(CONFIG_CMD_ETHSW) += cmd_ethsw.o

+# Power +obj-$(CONFIG_CMD_PMIC) += cmd_pmic.o +obj-$(CONFIG_CMD_REGULATOR) += cmd_regulator.o +endif # !CONFIG_SPL_BUILD

+ifdef CONFIG_SPL_BUILD +ifdef CONFIG_SPL_SATA_SUPPORT +obj-$(CONFIG_CMD_SCSI) += cmd_scsi.o +endif +endif # CONFIG_SPL_BUILD

+obj-$(CONFIG_CMD_BLOB) += cmd_blob.o

+# core command +obj-y += cmd_nvedit.o +obj-y += cmd_disk.o diff --git a/common/cmd_aes.c b/cmd/cmd_aes.c similarity index 100% rename from common/cmd_aes.c rename to cmd/cmd_aes.c diff --git a/common/cmd_ambapp.c b/cmd/cmd_ambapp.c similarity index 100% rename from common/cmd_ambapp.c rename to cmd/cmd_ambapp.c diff --git a/common/cmd_armflash.c b/cmd/cmd_armflash.c similarity index 100% rename from common/cmd_armflash.c rename to cmd/cmd_armflash.c diff --git a/common/cmd_bdinfo.c b/cmd/cmd_bdinfo.c similarity index 100% rename from common/cmd_bdinfo.c rename to cmd/cmd_bdinfo.c diff --git a/common/cmd_bedbug.c b/cmd/cmd_bedbug.c similarity index 100% rename from common/cmd_bedbug.c rename to cmd/cmd_bedbug.c diff --git a/common/cmd_blob.c b/cmd/cmd_blob.c similarity index 100% rename from common/cmd_blob.c rename to cmd/cmd_blob.c diff --git a/common/cmd_bmp.c b/cmd/cmd_bmp.c similarity index 100% rename from common/cmd_bmp.c rename to cmd/cmd_bmp.c diff --git a/common/cmd_boot.c b/cmd/cmd_boot.c similarity index 100% rename from common/cmd_boot.c rename to cmd/cmd_boot.c diff --git a/common/cmd_bootldr.c b/cmd/cmd_bootldr.c similarity index 100% rename from common/cmd_bootldr.c rename to cmd/cmd_bootldr.c diff --git a/common/cmd_bootm.c b/cmd/cmd_bootm.c similarity index 100% rename from common/cmd_bootm.c rename to cmd/cmd_bootm.c diff --git a/common/cmd_bootmenu.c b/cmd/cmd_bootmenu.c similarity index 100% rename from common/cmd_bootmenu.c rename to cmd/cmd_bootmenu.c diff --git a/common/cmd_bootstage.c b/cmd/cmd_bootstage.c similarity index 100% rename from common/cmd_bootstage.c rename to cmd/cmd_bootstage.c diff --git a/common/cmd_cache.c b/cmd/cmd_cache.c similarity index 100% rename from common/cmd_cache.c rename to cmd/cmd_cache.c diff --git a/common/cmd_cbfs.c b/cmd/cmd_cbfs.c similarity index 100% rename from common/cmd_cbfs.c rename to cmd/cmd_cbfs.c diff --git a/common/cmd_clk.c b/cmd/cmd_clk.c similarity index 100% rename from common/cmd_clk.c rename to cmd/cmd_clk.c diff --git a/common/cmd_console.c b/cmd/cmd_console.c similarity index 100% rename from common/cmd_console.c rename to cmd/cmd_console.c diff --git a/common/cmd_cplbinfo.c b/cmd/cmd_cplbinfo.c similarity index 100% rename from common/cmd_cplbinfo.c rename to cmd/cmd_cplbinfo.c diff --git a/common/cmd_cpu.c b/cmd/cmd_cpu.c similarity index 100% rename from common/cmd_cpu.c rename to cmd/cmd_cpu.c diff --git a/common/cmd_cramfs.c b/cmd/cmd_cramfs.c similarity index 100% rename from common/cmd_cramfs.c rename to cmd/cmd_cramfs.c diff --git a/common/cmd_dataflash_mmc_mux.c b/cmd/cmd_dataflash_mmc_mux.c similarity index 100% rename from common/cmd_dataflash_mmc_mux.c rename to cmd/cmd_dataflash_mmc_mux.c diff --git a/common/cmd_date.c b/cmd/cmd_date.c similarity index 100% rename from common/cmd_date.c rename to cmd/cmd_date.c diff --git a/common/cmd_dcr.c b/cmd/cmd_dcr.c similarity index 100% rename from common/cmd_dcr.c rename to cmd/cmd_dcr.c diff --git a/common/cmd_demo.c b/cmd/cmd_demo.c similarity index 100% rename from common/cmd_demo.c rename to cmd/cmd_demo.c diff --git a/common/cmd_dfu.c b/cmd/cmd_dfu.c similarity index 100% rename from common/cmd_dfu.c rename to cmd/cmd_dfu.c diff --git a/common/cmd_diag.c b/cmd/cmd_diag.c similarity index 100% rename from common/cmd_diag.c rename to cmd/cmd_diag.c diff --git a/common/cmd_disk.c b/cmd/cmd_disk.c similarity index 100% rename from common/cmd_disk.c rename to cmd/cmd_disk.c diff --git a/common/cmd_display.c b/cmd/cmd_display.c similarity index 100% rename from common/cmd_display.c rename to cmd/cmd_display.c diff --git a/common/cmd_dtt.c b/cmd/cmd_dtt.c similarity index 100% rename from common/cmd_dtt.c rename to cmd/cmd_dtt.c diff --git a/common/cmd_echo.c b/cmd/cmd_echo.c similarity index 100% rename from common/cmd_echo.c rename to cmd/cmd_echo.c diff --git a/common/cmd_eeprom.c b/cmd/cmd_eeprom.c similarity index 100% rename from common/cmd_eeprom.c rename to cmd/cmd_eeprom.c diff --git a/common/cmd_efi.c b/cmd/cmd_efi.c similarity index 100% rename from common/cmd_efi.c rename to cmd/cmd_efi.c diff --git a/common/cmd_elf.c b/cmd/cmd_elf.c similarity index 100% rename from common/cmd_elf.c rename to cmd/cmd_elf.c diff --git a/common/cmd_ethsw.c b/cmd/cmd_ethsw.c similarity index 100% rename from common/cmd_ethsw.c rename to cmd/cmd_ethsw.c diff --git a/common/cmd_exit.c b/cmd/cmd_exit.c similarity index 100% rename from common/cmd_exit.c rename to cmd/cmd_exit.c diff --git a/common/cmd_ext2.c b/cmd/cmd_ext2.c similarity index 100% rename from common/cmd_ext2.c rename to cmd/cmd_ext2.c diff --git a/common/cmd_ext4.c b/cmd/cmd_ext4.c similarity index 100% rename from common/cmd_ext4.c rename to cmd/cmd_ext4.c diff --git a/common/cmd_fastboot.c b/cmd/cmd_fastboot.c similarity index 100% rename from common/cmd_fastboot.c rename to cmd/cmd_fastboot.c diff --git a/common/cmd_fat.c b/cmd/cmd_fat.c similarity index 100% rename from common/cmd_fat.c rename to cmd/cmd_fat.c diff --git a/common/cmd_fdc.c b/cmd/cmd_fdc.c similarity index 100% rename from common/cmd_fdc.c rename to cmd/cmd_fdc.c diff --git a/common/cmd_fdt.c b/cmd/cmd_fdt.c similarity index 100% rename from common/cmd_fdt.c rename to cmd/cmd_fdt.c diff --git a/common/cmd_fitupd.c b/cmd/cmd_fitupd.c similarity index 100% rename from common/cmd_fitupd.c rename to cmd/cmd_fitupd.c diff --git a/common/cmd_flash.c b/cmd/cmd_flash.c similarity index 100% rename from common/cmd_flash.c rename to cmd/cmd_flash.c diff --git a/common/cmd_fpga.c b/cmd/cmd_fpga.c similarity index 100% rename from common/cmd_fpga.c rename to cmd/cmd_fpga.c diff --git a/common/cmd_fpgad.c b/cmd/cmd_fpgad.c similarity index 100% rename from common/cmd_fpgad.c rename to cmd/cmd_fpgad.c diff --git a/common/cmd_fs.c b/cmd/cmd_fs.c similarity index 100% rename from common/cmd_fs.c rename to cmd/cmd_fs.c diff --git a/common/cmd_fs_uuid.c b/cmd/cmd_fs_uuid.c similarity index 100% rename from common/cmd_fs_uuid.c rename to cmd/cmd_fs_uuid.c diff --git a/common/cmd_fuse.c b/cmd/cmd_fuse.c similarity index 100% rename from common/cmd_fuse.c rename to cmd/cmd_fuse.c diff --git a/common/cmd_gettime.c b/cmd/cmd_gettime.c similarity index 100% rename from common/cmd_gettime.c rename to cmd/cmd_gettime.c diff --git a/common/cmd_gpio.c b/cmd/cmd_gpio.c similarity index 100% rename from common/cmd_gpio.c rename to cmd/cmd_gpio.c diff --git a/common/cmd_gpt.c b/cmd/cmd_gpt.c similarity index 100% rename from common/cmd_gpt.c rename to cmd/cmd_gpt.c diff --git a/common/cmd_hash.c b/cmd/cmd_hash.c similarity index 100% rename from common/cmd_hash.c rename to cmd/cmd_hash.c diff --git a/common/cmd_help.c b/cmd/cmd_help.c similarity index 100% rename from common/cmd_help.c rename to cmd/cmd_help.c diff --git a/common/cmd_host.c b/cmd/cmd_host.c similarity index 100% rename from common/cmd_host.c rename to cmd/cmd_host.c diff --git a/common/cmd_i2c.c b/cmd/cmd_i2c.c similarity index 100% rename from common/cmd_i2c.c rename to cmd/cmd_i2c.c diff --git a/common/cmd_ide.c b/cmd/cmd_ide.c similarity index 100% rename from common/cmd_ide.c rename to cmd/cmd_ide.c diff --git a/common/cmd_immap.c b/cmd/cmd_immap.c similarity index 100% rename from common/cmd_immap.c rename to cmd/cmd_immap.c diff --git a/common/cmd_ini.c b/cmd/cmd_ini.c similarity index 100% rename from common/cmd_ini.c rename to cmd/cmd_ini.c diff --git a/common/cmd_io.c b/cmd/cmd_io.c similarity index 100% rename from common/cmd_io.c rename to cmd/cmd_io.c diff --git a/common/cmd_iotrace.c b/cmd/cmd_iotrace.c similarity index 100% rename from common/cmd_iotrace.c rename to cmd/cmd_iotrace.c diff --git a/common/cmd_irq.c b/cmd/cmd_irq.c similarity index 100% rename from common/cmd_irq.c rename to cmd/cmd_irq.c diff --git a/common/cmd_itest.c b/cmd/cmd_itest.c similarity index 100% rename from common/cmd_itest.c rename to cmd/cmd_itest.c diff --git a/common/cmd_jffs2.c b/cmd/cmd_jffs2.c similarity index 100% rename from common/cmd_jffs2.c rename to cmd/cmd_jffs2.c diff --git a/common/cmd_ldrinfo.c b/cmd/cmd_ldrinfo.c similarity index 100% rename from common/cmd_ldrinfo.c rename to cmd/cmd_ldrinfo.c diff --git a/common/cmd_led.c b/cmd/cmd_led.c similarity index 100% rename from common/cmd_led.c rename to cmd/cmd_led.c diff --git a/common/cmd_license.c b/cmd/cmd_license.c similarity index 100% rename from common/cmd_license.c rename to cmd/cmd_license.c diff --git a/common/cmd_load.c b/cmd/cmd_load.c similarity index 100% rename from common/cmd_load.c rename to cmd/cmd_load.c diff --git a/common/cmd_log.c b/cmd/cmd_log.c similarity index 100% rename from common/cmd_log.c rename to cmd/cmd_log.c diff --git a/common/cmd_lzmadec.c b/cmd/cmd_lzmadec.c similarity index 100% rename from common/cmd_lzmadec.c rename to cmd/cmd_lzmadec.c diff --git a/common/cmd_mac.c b/cmd/cmd_mac.c similarity index 100% rename from common/cmd_mac.c rename to cmd/cmd_mac.c diff --git a/common/cmd_md5sum.c b/cmd/cmd_md5sum.c similarity index 100% rename from common/cmd_md5sum.c rename to cmd/cmd_md5sum.c diff --git a/common/cmd_mdio.c b/cmd/cmd_mdio.c similarity index 100% rename from common/cmd_mdio.c rename to cmd/cmd_mdio.c diff --git a/common/cmd_mem.c b/cmd/cmd_mem.c similarity index 100% rename from common/cmd_mem.c rename to cmd/cmd_mem.c diff --git a/common/cmd_mfsl.c b/cmd/cmd_mfsl.c similarity index 100% rename from common/cmd_mfsl.c rename to cmd/cmd_mfsl.c diff --git a/common/cmd_mii.c b/cmd/cmd_mii.c similarity index 100% rename from common/cmd_mii.c rename to cmd/cmd_mii.c diff --git a/common/cmd_misc.c b/cmd/cmd_misc.c similarity index 100% rename from common/cmd_misc.c rename to cmd/cmd_misc.c diff --git a/common/cmd_mmc.c b/cmd/cmd_mmc.c similarity index 100% rename from common/cmd_mmc.c rename to cmd/cmd_mmc.c diff --git a/common/cmd_mmc_spi.c b/cmd/cmd_mmc_spi.c similarity index 100% rename from common/cmd_mmc_spi.c rename to cmd/cmd_mmc_spi.c diff --git a/common/cmd_mp.c b/cmd/cmd_mp.c similarity index 100% rename from common/cmd_mp.c rename to cmd/cmd_mp.c diff --git a/common/cmd_mtdparts.c b/cmd/cmd_mtdparts.c similarity index 100% rename from common/cmd_mtdparts.c rename to cmd/cmd_mtdparts.c diff --git a/common/cmd_nand.c b/cmd/cmd_nand.c similarity index 100% rename from common/cmd_nand.c rename to cmd/cmd_nand.c diff --git a/common/cmd_net.c b/cmd/cmd_net.c similarity index 100% rename from common/cmd_net.c rename to cmd/cmd_net.c diff --git a/common/cmd_nvedit.c b/cmd/cmd_nvedit.c similarity index 100% rename from common/cmd_nvedit.c rename to cmd/cmd_nvedit.c diff --git a/common/cmd_onenand.c b/cmd/cmd_onenand.c similarity index 100% rename from common/cmd_onenand.c rename to cmd/cmd_onenand.c diff --git a/common/cmd_otp.c b/cmd/cmd_otp.c similarity index 100% rename from common/cmd_otp.c rename to cmd/cmd_otp.c diff --git a/common/cmd_part.c b/cmd/cmd_part.c similarity index 100% rename from common/cmd_part.c rename to cmd/cmd_part.c diff --git a/common/cmd_pci.c b/cmd/cmd_pci.c similarity index 100% rename from common/cmd_pci.c rename to cmd/cmd_pci.c diff --git a/common/cmd_pcmcia.c b/cmd/cmd_pcmcia.c similarity index 100% rename from common/cmd_pcmcia.c rename to cmd/cmd_pcmcia.c diff --git a/common/cmd_pmic.c b/cmd/cmd_pmic.c similarity index 100% rename from common/cmd_pmic.c rename to cmd/cmd_pmic.c diff --git a/common/cmd_portio.c b/cmd/cmd_portio.c similarity index 100% rename from common/cmd_portio.c rename to cmd/cmd_portio.c diff --git a/common/cmd_pxe.c b/cmd/cmd_pxe.c similarity index 100% rename from common/cmd_pxe.c rename to cmd/cmd_pxe.c diff --git a/common/cmd_read.c b/cmd/cmd_read.c similarity index 100% rename from common/cmd_read.c rename to cmd/cmd_read.c diff --git a/common/cmd_reginfo.c b/cmd/cmd_reginfo.c similarity index 100% rename from common/cmd_reginfo.c rename to cmd/cmd_reginfo.c diff --git a/common/cmd_regulator.c b/cmd/cmd_regulator.c similarity index 100% rename from common/cmd_regulator.c rename to cmd/cmd_regulator.c diff --git a/common/cmd_reiser.c b/cmd/cmd_reiser.c similarity index 100% rename from common/cmd_reiser.c rename to cmd/cmd_reiser.c diff --git a/common/cmd_remoteproc.c b/cmd/cmd_remoteproc.c similarity index 100% rename from common/cmd_remoteproc.c rename to cmd/cmd_remoteproc.c diff --git a/common/cmd_sata.c b/cmd/cmd_sata.c similarity index 100% rename from common/cmd_sata.c rename to cmd/cmd_sata.c diff --git a/common/cmd_scsi.c b/cmd/cmd_scsi.c similarity index 100% rename from common/cmd_scsi.c rename to cmd/cmd_scsi.c diff --git a/common/cmd_setexpr.c b/cmd/cmd_setexpr.c similarity index 100% rename from common/cmd_setexpr.c rename to cmd/cmd_setexpr.c diff --git a/common/cmd_sf.c b/cmd/cmd_sf.c similarity index 100% rename from common/cmd_sf.c rename to cmd/cmd_sf.c diff --git a/common/cmd_sha1sum.c b/cmd/cmd_sha1sum.c similarity index 100% rename from common/cmd_sha1sum.c rename to cmd/cmd_sha1sum.c diff --git a/common/cmd_softswitch.c b/cmd/cmd_softswitch.c similarity index 100% rename from common/cmd_softswitch.c rename to cmd/cmd_softswitch.c diff --git a/common/cmd_sound.c b/cmd/cmd_sound.c similarity index 100% rename from common/cmd_sound.c rename to cmd/cmd_sound.c diff --git a/common/cmd_source.c b/cmd/cmd_source.c similarity index 100% rename from common/cmd_source.c rename to cmd/cmd_source.c diff --git a/common/cmd_spi.c b/cmd/cmd_spi.c similarity index 100% rename from common/cmd_spi.c rename to cmd/cmd_spi.c diff --git a/common/cmd_spibootldr.c b/cmd/cmd_spibootldr.c similarity index 100% rename from common/cmd_spibootldr.c rename to cmd/cmd_spibootldr.c diff --git a/common/cmd_spl.c b/cmd/cmd_spl.c similarity index 100% rename from common/cmd_spl.c rename to cmd/cmd_spl.c diff --git a/common/cmd_strings.c b/cmd/cmd_strings.c similarity index 100% rename from common/cmd_strings.c rename to cmd/cmd_strings.c diff --git a/common/cmd_terminal.c b/cmd/cmd_terminal.c similarity index 100% rename from common/cmd_terminal.c rename to cmd/cmd_terminal.c diff --git a/common/cmd_test.c b/cmd/cmd_test.c similarity index 100% rename from common/cmd_test.c rename to cmd/cmd_test.c diff --git a/common/cmd_thordown.c b/cmd/cmd_thordown.c similarity index 100% rename from common/cmd_thordown.c rename to cmd/cmd_thordown.c diff --git a/common/cmd_time.c b/cmd/cmd_time.c similarity index 100% rename from common/cmd_time.c rename to cmd/cmd_time.c diff --git a/common/cmd_tpm.c b/cmd/cmd_tpm.c similarity index 100% rename from common/cmd_tpm.c rename to cmd/cmd_tpm.c diff --git a/common/cmd_tpm_test.c b/cmd/cmd_tpm_test.c similarity index 100% rename from common/cmd_tpm_test.c rename to cmd/cmd_tpm_test.c diff --git a/common/cmd_trace.c b/cmd/cmd_trace.c similarity index 100% rename from common/cmd_trace.c rename to cmd/cmd_trace.c diff --git a/common/cmd_tsi148.c b/cmd/cmd_tsi148.c similarity index 100% rename from common/cmd_tsi148.c rename to cmd/cmd_tsi148.c diff --git a/common/cmd_ubi.c b/cmd/cmd_ubi.c similarity index 100% rename from common/cmd_ubi.c rename to cmd/cmd_ubi.c diff --git a/common/cmd_ubifs.c b/cmd/cmd_ubifs.c similarity index 100% rename from common/cmd_ubifs.c rename to cmd/cmd_ubifs.c diff --git a/common/cmd_universe.c b/cmd/cmd_universe.c similarity index 100% rename from common/cmd_universe.c rename to cmd/cmd_universe.c diff --git a/common/cmd_unzip.c b/cmd/cmd_unzip.c similarity index 100% rename from common/cmd_unzip.c rename to cmd/cmd_unzip.c diff --git a/common/cmd_usb.c b/cmd/cmd_usb.c similarity index 100% rename from common/cmd_usb.c rename to cmd/cmd_usb.c diff --git a/common/cmd_usb_mass_storage.c b/cmd/cmd_usb_mass_storage.c similarity index 100% rename from common/cmd_usb_mass_storage.c rename to cmd/cmd_usb_mass_storage.c diff --git a/common/cmd_version.c b/cmd/cmd_version.c similarity index 100% rename from common/cmd_version.c rename to cmd/cmd_version.c diff --git a/common/cmd_ximg.c b/cmd/cmd_ximg.c similarity index 100% rename from common/cmd_ximg.c rename to cmd/cmd_ximg.c diff --git a/common/cmd_yaffs2.c b/cmd/cmd_yaffs2.c similarity index 100% rename from common/cmd_yaffs2.c rename to cmd/cmd_yaffs2.c diff --git a/common/cmd_zfs.c b/cmd/cmd_zfs.c similarity index 100% rename from common/cmd_zfs.c rename to cmd/cmd_zfs.c diff --git a/common/cmd_zip.c b/cmd/cmd_zip.c similarity index 100% rename from common/cmd_zip.c rename to cmd/cmd_zip.c diff --git a/common/Kconfig b/common/Kconfig index 9d446bf..067545d 100644 --- a/common/Kconfig +++ b/common/Kconfig @@ -1,522 +1,3 @@ -menu "Command line interface"

-config HUSH_PARSER

• bool "Use hush shell"
• select SYS_HUSH_PARSER
• help

•  This option enables the "hush" shell (from Busybox) as command line
  

•  interpreter, thus enabling powerful command line syntax like
  

•  if...then...else...fi conditionals or `&&' and '||'
  

•  constructs ("shell scripts").
  

•  If disabled, you get the old, much simpler behaviour with a somewhat
  

•  smaller memory footprint.
  

-config SYS_HUSH_PARSER

• bool
• help

•  Backward compatibility.
  

-config SYS_PROMPT

• string "Shell prompt"
• default "=> "
• help

•  This string is displayed in the command line to the left of the
  

•  cursor.
  

-menu "Autoboot options"

-config AUTOBOOT_KEYED

• bool "Stop autobooting via specific input key / string"
• default n
• help

•  This option enables stopping (aborting) of the automatic
  

•  boot feature only by issuing a specific input key or
  

•  string. If not enabled, any input key will abort the
  

•  U-Boot automatic booting process and bring the device
  

•  to the U-Boot prompt for user input.
  

-config AUTOBOOT_PROMPT

• string "Autoboot stop prompt"
• depends on AUTOBOOT_KEYED
• default "Autoboot in %d seconds\n"
• help

•  This string is displayed before the boot delay selected by
  

•  CONFIG_BOOTDELAY starts. If it is not defined	there is no
  

•  output indicating that autoboot is in progress.
  

•  Note that this define is used as the (only) argument to a
  

•  printf() call, so it may contain '%' format specifications,
  

•  provided that it also includes, sepearated by commas exactly
  

•  like in a printf statement, the required arguments. It is
  

•  the responsibility of the user to select only such arguments
  

•  that are valid in the given context.
  

-config AUTOBOOT_ENCRYPTION

• bool "Enable encryption in autoboot stopping"
• depends on AUTOBOOT_KEYED
• default n

-config AUTOBOOT_DELAY_STR

• string "Delay autobooting via specific input key / string"
• depends on AUTOBOOT_KEYED && !AUTOBOOT_ENCRYPTION
• help

•  This option delays the automatic boot feature by issuing
  

•  a specific input key or string. If CONFIG_AUTOBOOT_DELAY_STR
  

•  or the environment variable "bootdelaykey" is specified
  

•  and this string is received from console input before
  

•  autoboot starts booting, U-Boot gives a command prompt. The
  

•  U-Boot prompt will time out if CONFIG_BOOT_RETRY_TIME is
  

•  used, otherwise it never times out.
  

-config AUTOBOOT_STOP_STR

• string "Stop autobooting via specific input key / string"
• depends on AUTOBOOT_KEYED && !AUTOBOOT_ENCRYPTION
• help

•  This option enables stopping (aborting) of the automatic
  

•  boot feature only by issuing a specific input key or
  

•  string. If CONFIG_AUTOBOOT_STOP_STR or the environment
  

•  variable "bootstopkey" is specified and this string is
  

•  received from console input before autoboot starts booting,
  

•  U-Boot gives a command prompt. The U-Boot prompt never
  

•  times out, even if CONFIG_BOOT_RETRY_TIME is used.
  

-config AUTOBOOT_KEYED_CTRLC

• bool "Enable Ctrl-C autoboot interruption"
• depends on AUTOBOOT_KEYED && !AUTOBOOT_ENCRYPTION
• default n
• help

•  This option allows for the boot sequence to be interrupted
  

•  by ctrl-c, in addition to the "bootdelaykey" and "bootstopkey".
  

•  Setting this variable	provides an escape sequence from the
  

•  limited "password" strings.
  

-config AUTOBOOT_STOP_STR_SHA256

• string "Stop autobooting via SHA256 encrypted password"
• depends on AUTOBOOT_KEYED && AUTOBOOT_ENCRYPTION
• help

•  This option adds the feature to only stop the autobooting,
  

•  and therefore boot into the U-Boot prompt, when the input
  

•  string / password matches a values that is encypted via
  

•  a SHA256 hash and saved in the environment.
  

-endmenu

-comment "Commands"

-menu "Info commands"

-config CMD_BDI

• bool "bdinfo"
• default y
• help

•  Print board info
  

-config CMD_CONSOLE

• bool "coninfo"
• default y
• help

•  Print console devices and information.
  

-config CMD_CPU

• bool "cpu"
• help

•  Print information about available CPUs. This normally shows the
  

•  number of CPUs, type (e.g. manufacturer, architecture, product or
  

•  internal name) and clock frequency. Other information may be
  

•  available depending on the CPU driver.
  

-config CMD_LICENSE

• bool "license"
• help

•  Print GPL license text
  

-endmenu

-menu "Boot commands"

-config CMD_BOOTD

• bool "bootd"
• default y
• help

•  Run the command stored in the environment "bootcmd", i.e.
  

•  "bootd" does the same thing as "run bootcmd".
  

-config CMD_BOOTM

• bool "bootm"
• default y
• help

•  Boot an application image from the memory.
  

-config CMD_ELF

• bool "bootelf, bootvx"
• default y
• help

•  Boot an ELF/vxWorks image from the memory.
  

-config CMD_GO

• bool "go"
• default y
• help

•  Start an application at a given address.
  

-config CMD_RUN

• bool "run"
• default y
• help

•  Run the command in the given environment variable.
  

-config CMD_IMI

• bool "iminfo"
• default y
• help

•  Print header information for application image.
  

-config CMD_IMLS

• bool "imls"
• default y
• help

•  List all images found in flash
  

-config CMD_XIMG

• bool "imxtract"
• default y
• help

•  Extract a part of a multi-image.
  

-config CMD_POWEROFF

• bool

-endmenu

-menu "Environment commands"

-config CMD_EXPORTENV

• bool "env export"
• default y
• help

•  Export environments.
  

-config CMD_IMPORTENV

• bool "env import"
• default y
• help

•  Import environments.
  

-config CMD_EDITENV

• bool "editenv"
• default y
• help

•  Edit environment variable.
  

-config CMD_SAVEENV

• bool "saveenv"
• default y
• help

•  Save all environment variables into the compiled-in persistent
  

•  storage.
  

-config CMD_ENV_EXISTS

• bool "env exists"
• default y
• help

•  Check if a variable is defined in the environment for use in
  

•  shell scripting.
  

-endmenu

-menu "Memory commands"

-config CMD_MEMORY

• bool "md, mm, nm, mw, cp, cmp, base, loop"
• default y
• help

•  Memeory commands.
  

•    md - memory display
  

•    mm - memory modify (auto-incrementing address)
  

•    nm - memory modify (constant address)
  

•    mw - memory write (fill)
  

•    cp - memory copy
  

•    cmp - memory compare
  

•    base - print or set address offset
  

•    loop - initinite loop on address range
  

-config CMD_CRC32

• bool "crc32"
• default y
• help

•  Compute CRC32.
  

-config LOOPW

• bool "loopw"
• help

•  Infinite write loop on address range
  

-config CMD_MEMTEST

• bool "memtest"
• help

•  Simple RAM read/write test.
  

-config CMD_MX_CYCLIC

• bool "mdc, mwc"
• help

•  mdc - memory display cyclic
  

•  mwc - memory write cyclic
  

-config CMD_MEMINFO

• bool "meminfo"
• help

•  Display memory information.
  

-endmenu

-menu "Device access commands"

-config CMD_DM

• bool "dm - Access to driver model information"
• depends on DM
• default y
• help

•  Provides access to driver model data structures and information,
  

•  such as a list of devices, list of uclasses and the state of each
  

•  device (e.g. activated). This is not required for operation, but
  

•  can be useful to see the state of driver model for debugging or
  

•  interest.
  

-config CMD_DEMO

• bool "demo - Demonstration commands for driver model"
• depends on DM
• help

•  Provides a 'demo' command which can be used to play around with
  

•  driver model. To use this properly you will need to enable one or
  

•  both of the demo devices (DM_DEMO_SHAPE and DM_DEMO_SIMPLE).
  

•  Otherwise you will always get an empty list of devices. The demo
  

•  devices are defined in the sandbox device tree, so the easiest
  

•  option is to use sandbox and pass the -d point to sandbox's
  

•  u-boot.dtb file.
  

-config CMD_LOADB

• bool "loadb"
• default y
• help

•  Load a binary file over serial line.
  

-config CMD_LOADS

• bool "loads"
• default y
• help

•  Load an S-Record file over serial line
  

-config CMD_FLASH

• bool "flinfo, erase, protect"
• default y
• help

•  NOR flash support.
  

•    flinfo - print FLASH memory information
  

•    erase - FLASH memory
  

•    protect - enable or disable FLASH write protection
  

-config CMD_ARMFLASH

• depends on FLASH_CFI_DRIVER
• bool "armflash"
• help

•  ARM Ltd reference designs flash partition access
  

-config CMD_NAND

• bool "nand"
• help

•  NAND support.
  

-config CMD_SF

• bool "sf"
• help

•  SPI Flash support
  

-config CMD_SPI

• bool "sspi"
• help

•  SPI utility command.
  

-config CMD_I2C

• bool "i2c"
• help

•  I2C support.
  

-config CMD_USB

• bool "usb"
• help

•  USB support.
  

-config CMD_FPGA

• bool "fpga"
• default y
• help

•  FPGA support.
  

-config CMD_REMOTEPROC

• bool "remoteproc"
• depends on REMOTEPROC
• help

•  Support for Remote Processor control
  

-config CMD_GPIO

• bool "gpio"
• help

•  GPIO support.
  

-endmenu

-menu "Shell scripting commands"

-config CMD_ECHO

• bool "echo"
• default y
• help

•  Echo args to console
  

-config CMD_ITEST

• bool "itest"
• default y
• help

•  Return true/false on integer compare.
  

-config CMD_SOURCE

• bool "source"
• default y
• help

•  Run script from memory
  

-config CMD_SETEXPR

• bool "setexpr"
• default y
• help

•  Evaluate boolean and math expressions and store the result in an env
  

•    variable.
  

•  Also supports loading the value at a memory location into a variable.
  

•  If CONFIG_REGEX is enabled, setexpr also supports a gsub function.
  

-endmenu

-menu "Network commands"

-config CMD_NET

• bool "bootp, tftpboot"

•    select NET
  

• default y
• help

•  Network commands.
  

•  bootp - boot image via network using BOOTP/TFTP protocol
  

•  tftpboot - boot image via network using TFTP protocol
  

-config CMD_TFTPPUT

• bool "tftp put"
• help

•  TFTP put command, for uploading files to a server
  

-config CMD_TFTPSRV

• bool "tftpsrv"
• help

•  Act as a TFTP server and boot the first received file
  

-config CMD_RARP

• bool "rarpboot"
• help

•  Boot image via network using RARP/TFTP protocol
  

-config CMD_DHCP

• bool "dhcp"
• help

•  Boot image via network using DHCP/TFTP protocol
  

-config CMD_NFS

• bool "nfs"
• default y
• help

•  Boot image via network using NFS protocol.
  

-config CMD_PING

• bool "ping"
• help

•  Send ICMP ECHO_REQUEST to network host
  

-config CMD_CDP

• bool "cdp"
• help

•  Perform CDP network configuration
  

-config CMD_SNTP

• bool "sntp"
• help

•  Synchronize RTC via network
  

-config CMD_DNS

• bool "dns"
• help

•  Lookup the IP of a hostname
  

-config CMD_LINK_LOCAL

• bool "linklocal"
• help

•  Acquire a network IP address using the link-local protocol
  

-endmenu

-menu "Misc commands"

-config CMD_AMBAPP

• bool "ambapp"
• depends on LEON3
• default y
• help

•  Lists AMBA Plug-n-Play information.
  

-config SYS_AMBAPP_PRINT_ON_STARTUP

• bool "Show AMBA PnP info on startup"
• depends on CMD_AMBAPP
• default n
• help

•  Show AMBA Plug-n-Play information on startup.
  

-config CMD_TIME

• bool "time"
• help

•  Run commands and summarize execution time.
  

-# TODO: rename to CMD_SLEEP -config CMD_MISC

• bool "sleep"
• default y
• help

•  Delay execution for some time
  

-config CMD_TIMER

• bool "timer"
• help

•  Access the system timer.
  

-config CMD_SETGETDCR

• bool "getdcr, setdcr, getidcr, setidcr"
• depends on 4xx
• default y
• help

•  getdcr - Get an AMCC PPC 4xx DCR's value
  

•  setdcr - Set an AMCC PPC 4xx DCR's value
  

•  getidcr - Get a register value via indirect DCR addressing
  

•  setidcr - Set a register value via indirect DCR addressing
  

-config CMD_SOUND

• bool "sound"
• depends on SOUND
• help

•  This provides basic access to the U-Boot's sound support. The main
  

•  feature is to play a beep.
  

•     sound init   - set up sound system
  

•     sound play   - play a sound
  

-endmenu

• menu "Boot timing"

  config BOOTSTAGE

@@ -565,13 +46,6 @@ config BOOTSTAGE_USER_COUNT a new ID will be allocated from this stash. If you exceed the limit, recording will stop.

-config CMD_BOOTSTAGE

• bool "Enable the 'bootstage' command"
• depends on BOOTSTAGE
• help

•  Add a 'bootstage' command which supports printing a report
  

•  and un/stashing of bootstage data.
  

• config BOOTSTAGE_FDT bool "Store boot timing information in the OS device tree" depends on BOOTSTAGE

@@ -623,66 +97,6 @@ config BOOTSTAGE_STASH_SIZE

endmenu

-menu "Power commands" -config CMD_PMIC

• bool "Enable Driver Model PMIC command"
• depends on DM_PMIC
• help

•  This is the pmic command, based on a driver model pmic's API.
  

•  Command features are unchanged:
  

•  - list               - list pmic devices
  

•  - pmic dev <id>      - show or [set] operating pmic device (NEW)
  

•  - pmic dump          - dump registers
  

•  - pmic read address  - read byte of register at address
  

•  - pmic write address - write byte to register at address
  

•  The only one change for this command is 'dev' subcommand.
  

-config CMD_REGULATOR

• bool "Enable Driver Model REGULATOR command"
• depends on DM_REGULATOR
• help

•  This command is based on driver model regulator's API.
  

•  User interface features:
  

•  - list               - list regulator devices
  

•  - regulator dev <id> - show or [set] operating regulator device
  

•  - regulator info     - print constraints info
  

•  - regulator status   - print operating status
  

•  - regulator value <val] <-f> - print/[set] voltage value [uV]
  

•  - regulator current <val>    - print/[set] current value [uA]
  

•  - regulator mode <id>        - print/[set] operating mode id
  

•  - regulator enable           - enable the regulator output
  

•  - regulator disable          - disable the regulator output
  

•  The '-f' (force) option can be used for set the value which exceeds
  

•  the limits, which are found in device-tree and are kept in regulator's
  

•  uclass platdata structure.
  

-endmenu

-menu "Security commands" -config CMD_TPM

• bool "Enable the 'tpm' command"
• depends on TPM
• help

•  This provides a means to talk to a TPM from the command line. A wide
  

•  range of commands if provided - see 'tpm help' for details. The
  

•  command requires a suitable TPM on your board and the correct driver
  

•  must be enabled.
  

-config CMD_TPM_TEST

• bool "Enable the 'tpm test' command"
• depends on CMD_TPM
• help

•  This provides a a series of tests to confirm that the TPM is working
  

•  correctly. The tests cover initialisation, non-volatile RAM, extend,
  

•  global lock and checking that timing is within expectations. The
  

•  tests pass correctly on Infineon TPMs but may need to be adjusted
  

•  for other devices.
  

-endmenu

-endmenu

• config CONSOLE_RECORD bool "Console recording" help

diff --git a/common/Makefile b/common/Makefile index 2a1d9f8..fcf972d 100644 --- a/common/Makefile +++ b/common/Makefile @@ -31,11 +31,7 @@ obj-$(CONFIG_SYS_GENERIC_BOARD) += board_r.o obj-$(CONFIG_DISPLAY_BOARDINFO) += board_info.o obj-$(CONFIG_DISPLAY_BOARDINFO_LATE) += board_info.o

-# core command -obj-y += cmd_boot.o -obj-$(CONFIG_CMD_BOOTM) += cmd_bootm.o bootm.o bootm_os.o -obj-y += cmd_help.o -obj-y += cmd_version.o +obj-$(CONFIG_CMD_BOOTM) += bootm.o bootm_os.o

# environment obj-y += env_attr.o @@ -58,143 +54,17 @@ obj-$(CONFIG_ENV_IS_IN_REMOTE) += env_remote.o obj-$(CONFIG_ENV_IS_IN_UBI) += env_ubi.o obj-$(CONFIG_ENV_IS_NOWHERE) += env_nowhere.o

-# command -obj-$(CONFIG_CMD_AES) += cmd_aes.o -obj-$(CONFIG_CMD_AMBAPP) += cmd_ambapp.o -obj-$(CONFIG_CMD_ARMFLASH) += cmd_armflash.o -obj-$(CONFIG_SOURCE) += cmd_source.o -obj-$(CONFIG_CMD_SOURCE) += cmd_source.o -obj-$(CONFIG_CMD_BDI) += cmd_bdinfo.o -obj-$(CONFIG_CMD_BEDBUG) += bedbug.o cmd_bedbug.o -obj-$(CONFIG_CMD_BMP) += cmd_bmp.o -obj-$(CONFIG_CMD_BOOTMENU) += cmd_bootmenu.o -obj-$(CONFIG_CMD_BOOTLDR) += cmd_bootldr.o -obj-$(CONFIG_CMD_BOOTSTAGE) += cmd_bootstage.o -obj-$(CONFIG_CMD_CACHE) += cmd_cache.o -obj-$(CONFIG_CMD_CBFS) += cmd_cbfs.o -obj-$(CONFIG_CMD_CLK) += cmd_clk.o -obj-$(CONFIG_CMD_CONSOLE) += cmd_console.o -obj-$(CONFIG_CMD_CPLBINFO) += cmd_cplbinfo.o -obj-$(CONFIG_CMD_CPU) += cmd_cpu.o -obj-$(CONFIG_DATAFLASH_MMC_SELECT) += cmd_dataflash_mmc_mux.o -obj-$(CONFIG_CMD_DATE) += cmd_date.o -obj-$(CONFIG_CMD_DEMO) += cmd_demo.o -obj-$(CONFIG_CMD_SOUND) += cmd_sound.o -ifdef CONFIG_4xx -obj-$(CONFIG_CMD_SETGETDCR) += cmd_dcr.o -endif -ifdef CONFIG_POST -obj-$(CONFIG_CMD_DIAG) += cmd_diag.o -endif -obj-$(CONFIG_CMD_DISPLAY) += cmd_display.o -obj-$(CONFIG_CMD_DTT) += cmd_dtt.o -obj-$(CONFIG_CMD_ECHO) += cmd_echo.o -obj-$(CONFIG_ENV_IS_IN_EEPROM) += cmd_eeprom.o -obj-$(CONFIG_CMD_EEPROM) += cmd_eeprom.o -obj-$(CONFIG_EFI_STUB) += cmd_efi.o -obj-$(CONFIG_CMD_ELF) += cmd_elf.o -obj-$(CONFIG_SYS_HUSH_PARSER) += cmd_exit.o -obj-$(CONFIG_CMD_EXT4) += cmd_ext4.o -obj-$(CONFIG_CMD_EXT2) += cmd_ext2.o -obj-$(CONFIG_CMD_FAT) += cmd_fat.o -obj-$(CONFIG_CMD_FDC) += cmd_fdc.o -obj-$(CONFIG_OF_LIBFDT) += cmd_fdt.o fdt_support.o -obj-$(CONFIG_CMD_FITUPD) += cmd_fitupd.o -obj-$(CONFIG_CMD_FLASH) += cmd_flash.o -ifdef CONFIG_FPGA -obj-$(CONFIG_CMD_FPGA) += cmd_fpga.o -endif -obj-$(CONFIG_CMD_FPGAD) += cmd_fpgad.o -obj-$(CONFIG_CMD_FS_GENERIC) += cmd_fs.o -obj-$(CONFIG_CMD_FUSE) += cmd_fuse.o -obj-$(CONFIG_CMD_GETTIME) += cmd_gettime.o -obj-$(CONFIG_CMD_GPIO) += cmd_gpio.o -obj-$(CONFIG_CMD_I2C) += cmd_i2c.o -obj-$(CONFIG_CMD_IOTRACE) += cmd_iotrace.o -obj-$(CONFIG_CMD_HASH) += cmd_hash.o -obj-$(CONFIG_CMD_IDE) += cmd_ide.o -obj-$(CONFIG_CMD_IMMAP) += cmd_immap.o -obj-$(CONFIG_CMD_INI) += cmd_ini.o -obj-$(CONFIG_CMD_IRQ) += cmd_irq.o -obj-$(CONFIG_CMD_ITEST) += cmd_itest.o -obj-$(CONFIG_CMD_JFFS2) += cmd_jffs2.o -obj-$(CONFIG_CMD_CRAMFS) += cmd_cramfs.o -obj-$(CONFIG_CMD_LDRINFO) += cmd_ldrinfo.o -obj-$(CONFIG_CMD_LED) += cmd_led.o -obj-$(CONFIG_CMD_LICENSE) += cmd_license.o -obj-y += cmd_load.o -obj-$(CONFIG_LOGBUFFER) += cmd_log.o -obj-$(CONFIG_ID_EEPROM) += cmd_mac.o -obj-$(CONFIG_CMD_MD5SUM) += cmd_md5sum.o -obj-$(CONFIG_CMD_MEMORY) += cmd_mem.o -obj-$(CONFIG_CMD_IO) += cmd_io.o -obj-$(CONFIG_CMD_MFSL) += cmd_mfsl.o +obj-$(CONFIG_CMD_BEDBUG) += bedbug.o +obj-$(CONFIG_OF_LIBFDT) += fdt_support.o

• obj-$(CONFIG_MII) += miiphyutil.o obj-$(CONFIG_CMD_MII) += miiphyutil.o obj-$(CONFIG_PHYLIB) += miiphyutil.o

-obj-$(CONFIG_CMD_MII) += cmd_mii.o -ifdef CONFIG_PHYLIB -obj-$(CONFIG_CMD_MII) += cmd_mdio.o -endif -obj-$(CONFIG_CMD_MISC) += cmd_misc.o -obj-$(CONFIG_CMD_MMC) += cmd_mmc.o -obj-$(CONFIG_CMD_MMC_SPI) += cmd_mmc_spi.o -obj-$(CONFIG_MP) += cmd_mp.o -obj-$(CONFIG_CMD_MTDPARTS) += cmd_mtdparts.o -obj-$(CONFIG_CMD_NAND) += cmd_nand.o -obj-$(CONFIG_CMD_NET) += cmd_net.o -obj-$(CONFIG_CMD_ONENAND) += cmd_onenand.o -obj-$(CONFIG_CMD_OTP) += cmd_otp.o -obj-$(CONFIG_CMD_PART) += cmd_part.o -ifdef CONFIG_PCI -obj-$(CONFIG_CMD_PCI) += cmd_pci.o -endif -obj-y += cmd_pcmcia.o -obj-$(CONFIG_CMD_PORTIO) += cmd_portio.o -obj-$(CONFIG_CMD_PXE) += cmd_pxe.o -obj-$(CONFIG_CMD_READ) += cmd_read.o -obj-$(CONFIG_CMD_REGINFO) += cmd_reginfo.o -obj-$(CONFIG_CMD_REISER) += cmd_reiser.o -obj-$(CONFIG_CMD_REMOTEPROC) += cmd_remoteproc.o -obj-$(CONFIG_SANDBOX) += cmd_host.o -obj-$(CONFIG_CMD_SATA) += cmd_sata.o -obj-$(CONFIG_CMD_SF) += cmd_sf.o -obj-$(CONFIG_CMD_SCSI) += cmd_scsi.o -obj-$(CONFIG_CMD_SHA1SUM) += cmd_sha1sum.o -obj-$(CONFIG_CMD_SETEXPR) += cmd_setexpr.o -obj-$(CONFIG_CMD_SOFTSWITCH) += cmd_softswitch.o -obj-$(CONFIG_CMD_SPI) += cmd_spi.o -obj-$(CONFIG_CMD_SPIBOOTLDR) += cmd_spibootldr.o -obj-$(CONFIG_CMD_STRINGS) += cmd_strings.o -obj-$(CONFIG_CMD_TERMINAL) += cmd_terminal.o -obj-$(CONFIG_CMD_TIME) += cmd_time.o -obj-$(CONFIG_CMD_TRACE) += cmd_trace.o -obj-$(CONFIG_SYS_HUSH_PARSER) += cmd_test.o -obj-$(CONFIG_CMD_TPM) += cmd_tpm.o -obj-$(CONFIG_CMD_TPM_TEST) += cmd_tpm_test.o -obj-$(CONFIG_CMD_TSI148) += cmd_tsi148.o -obj-$(CONFIG_CMD_UBI) += cmd_ubi.o -obj-$(CONFIG_CMD_UBIFS) += cmd_ubifs.o -obj-$(CONFIG_CMD_UNIVERSE) += cmd_universe.o -obj-$(CONFIG_CMD_UNZIP) += cmd_unzip.o -ifdef CONFIG_LZMA -obj-$(CONFIG_CMD_LZMADEC) += cmd_lzmadec.o -endif

• ifdef CONFIG_CMD_USB

-obj-y += cmd_usb.o obj-y += usb.o usb_hub.o obj-$(CONFIG_USB_STORAGE) += usb_storage.o endif -obj-$(CONFIG_CMD_FASTBOOT) += cmd_fastboot.o -obj-$(CONFIG_CMD_FS_UUID) += cmd_fs_uuid.o

-obj-$(CONFIG_CMD_USB_MASS_STORAGE) += cmd_usb_mass_storage.o -obj-$(CONFIG_CMD_THOR_DOWNLOAD) += cmd_thordown.o -obj-$(CONFIG_CMD_XIMG) += cmd_ximg.o -obj-$(CONFIG_YAFFS2) += cmd_yaffs2.o -obj-$(CONFIG_CMD_SPL) += cmd_spl.o -obj-$(CONFIG_CMD_ZIP) += cmd_zip.o -obj-$(CONFIG_CMD_ZFS) += cmd_zfs.o

# others obj-$(CONFIG_BOOTSTAGE) += bootstage.o @@ -214,14 +84,8 @@ obj-$(CONFIG_MODEM_SUPPORT) += modem.o obj-$(CONFIG_UPDATE_TFTP) += update.o obj-$(CONFIG_DFU_TFTP) += update.o obj-$(CONFIG_USB_KEYBOARD) += usb_kbd.o -obj-$(CONFIG_CMD_DFU) += cmd_dfu.o -obj-$(CONFIG_CMD_GPT) += cmd_gpt.o -obj-$(CONFIG_CMD_ETHSW) += cmd_ethsw.o

-# Power -obj-$(CONFIG_CMD_PMIC) += cmd_pmic.o -obj-$(CONFIG_CMD_REGULATOR) += cmd_regulator.o -endif +endif # !CONFIG_SPL_BUILD

ifdef CONFIG_SPL_BUILD obj-$(CONFIG_ENV_IS_IN_FLASH) += env_flash.o @@ -232,9 +96,6 @@ ifdef CONFIG_SPL_USB_HOST_SUPPORT obj-$(CONFIG_SPL_USB_SUPPORT) += usb.o usb_hub.o obj-$(CONFIG_USB_STORAGE) += usb_storage.o endif -ifdef CONFIG_SPL_SATA_SUPPORT -obj-$(CONFIG_CMD_SCSI) += cmd_scsi.o -endif # environment ifdef CONFIG_SPL_ENV_SUPPORT obj-$(CONFIG_SPL_ENV_SUPPORT) += env_attr.o @@ -248,8 +109,6 @@ obj-$(CONFIG_ENV_IS_IN_SPI_FLASH) += env_sf.o obj-$(CONFIG_ENV_IS_IN_FLASH) += env_flash.o endif endif -# core command -obj-y += cmd_nvedit.o #environment obj-y += env_common.o #others @@ -287,8 +146,6 @@ obj-y += fb_nand.o endif endif

-obj-$(CONFIG_CMD_BLOB) += cmd_blob.o

• # We always have this since drivers/ddr/fs/interactive.c needs it obj-y += cli_simple.o

@@ -297,6 +154,5 @@ obj-y += cli_readline.o obj-y += command.o obj-y += s_record.o obj-y += xyzModem.o -obj-y += cmd_disk.o

CFLAGS_env_embedded.o := -Wa,--no-warn -DENV_CRC=$(shell tools/envcrc 2>/dev/null) diff --git a/scripts/Makefile.spl b/scripts/Makefile.spl index 96f414a..dff16b9 100644 --- a/scripts/Makefile.spl +++ b/scripts/Makefile.spl @@ -53,7 +53,7 @@ libs-$(HAVE_VENDOR_COMMON_LIB) += board/$(VENDOR)/common/

libs-$(CONFIG_SPL_FRAMEWORK) += common/spl/ libs-y += common/init/ -libs-$(CONFIG_SPL_LIBCOMMON_SUPPORT) += common/ +libs-$(CONFIG_SPL_LIBCOMMON_SUPPORT) += common/ cmd/ libs-$(CONFIG_SPL_LIBDISK_SUPPORT) += disk/ libs-y += drivers/ libs-y += dts/