On Nov 16, 2010, at 2:48 AM, Shaohui Xie wrote:
PBL: SPI flash used as RCW and PBI source, CPC used as 1M SRAM where PBL will copy whole U-BOOT image to, U-boot can boot from CPC after PBL completes RCW and PBI phases.
Signed-off-by: Chunhe Lan b25806@freescale.com Signed-off-by: Mingkai Hu Mingkai.hu@freescale.com Signed-off-by: Shaohui Xie b21989@freescale.com
arch/powerpc/cpu/mpc85xx/cpu_init.c | 17 +++++++++++++++++ board/freescale/corenet_ds/config.mk | 6 ++++++ board/freescale/corenet_ds/tlb.c | 9 +++++++++ boards.cfg | 1 + include/configs/corenet_ds.h | 31 +++++++++++++++++++++++++++++-- 5 files changed, 62 insertions(+), 2 deletions(-)
diff --git a/arch/powerpc/cpu/mpc85xx/cpu_init.c b/arch/powerpc/cpu/mpc85xx/cpu_init.c index 27236a0..cff7ac3 100644 --- a/arch/powerpc/cpu/mpc85xx/cpu_init.c +++ b/arch/powerpc/cpu/mpc85xx/cpu_init.c @@ -139,6 +139,20 @@ static void enable_cpc(void) for (i = 0; i < CONFIG_SYS_NUM_CPC; i++, cpc++) { u32 cpccfg0 = in_be32(&cpc->cpccfg0); size += CPC_CFG0_SZ_K(cpccfg0);
if (in_be32(&cpc->cpcsrcr0) & CPC_SRCR0_SRAMEN) {/* find and disable LAW of SRAM */struct law_entry law = find_law(CONFIG_SYS_INIT_L3_ADDR);if (law.index == -1) {printf("\nFatal error happened\n");return;} elsedisable_law(law.index);clrbits_be32(&cpc->cpchdbcr0, CPC_HDBCR0_CDQ_SPEC_DIS);out_be32(&cpc->cpccsr0, 0);out_be32(&cpc->cpcsrcr0, 0);}out_be32(&cpc->cpccsr0, CPC_CSR0_CE | CPC_CSR0_PE); /* Read back to sync write */
@@ -155,6 +169,9 @@ void invalidate_cpc(void) cpc_corenet_t *cpc = (cpc_corenet_t *)CONFIG_SYS_FSL_CPC_ADDR;
for (i = 0; i < CONFIG_SYS_NUM_CPC; i++, cpc++) {
/* skip CPC when it used as all SRAM */if (in_be32(&cpc->cpcsrcr0) & CPC_SRCR0_SRAMEN)continue;diff --git a/board/freescale/corenet_ds/config.mk b/board/freescale/corenet_ds/config.mk index 15bbf20..31b3379 100644 --- a/board/freescale/corenet_ds/config.mk +++ b/board/freescale/corenet_ds/config.mk @@ -24,4 +24,10 @@ # P4080DS board #
+ifeq ($(CONFIG_PBL_BOOT_INDIRECT), y) +RESET_VECTOR_ADDRESS = 0xfffffffc +endif
+ifndef RESET_VECTOR_ADDRESS RESET_VECTOR_ADDRESS = 0xeffffffc +endif diff --git a/board/freescale/corenet_ds/tlb.c b/board/freescale/corenet_ds/tlb.c index 1ae0416..08f91a7 100644 --- a/board/freescale/corenet_ds/tlb.c +++ b/board/freescale/corenet_ds/tlb.c @@ -51,9 +51,18 @@ struct fsl_e_tlb_entry tlb_table[] = {
/* TLB 1 */ /* *I*** - Covers boot page */ +#if defined(CONFIG_SYS_RAMBOOT) && defined(CONFIG_SYS_INIT_L3_ADDR)
- /* *I*G - L3SRAM. When L3 is used as 1M SRAM, the address of the
* SRAM is at 0xfff00000, it covered the 0xfffff000.* */- SET_TLB_ENTRY(1, CONFIG_SYS_INIT_L3_ADDR, CONFIG_SYS_INIT_L3_ADDR,
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,0, 0, BOOKE_PAGESZ_1M, 1),+#else SET_TLB_ENTRY(1, 0xfffff000, 0xfffff000, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 0, BOOKE_PAGESZ_4K, 1), +#endif
/* *I*G* - CCSRBAR */ SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS, diff --git a/boards.cfg b/boards.cfg index 6c2a667..168d6f5 100644 --- a/boards.cfg +++ b/boards.cfg @@ -195,6 +195,7 @@ P1022DS powerpc mpc85xx p1022ds freescale P2020DS powerpc mpc85xx p2020ds freescale stxgp3 powerpc mpc85xx stxgp3 stx P4080DS powerpc mpc85xx corenet_ds freescale +P4080DS_PBL_BOOT_INDIRECT powerpc mpc85xx corenet_ds freescale - P4080DS:PBL_BOOT_INDIRECT,SYS_TEXT_BASE=0xFFF80000 sbc8540 powerpc mpc85xx sbc8560 - - SBC8540 sbc8548 powerpc mpc85xx sbc8548 - - sbc8548 sbc8560 powerpc mpc85xx sbc8560 - - sbc8560 diff --git a/include/configs/corenet_ds.h b/include/configs/corenet_ds.h index 2ac59e5..0776c3b 100644 --- a/include/configs/corenet_ds.h +++ b/include/configs/corenet_ds.h @@ -28,6 +28,11 @@
#include "../board/freescale/common/ics307_clk.h"
+#ifdef CONFIG_PBL_BOOT_INDIRECT +#define CONFIG_RAMBOOT_PBL 1 +#define CONFIG_RAMBOOT_TEXT_BASE 0xfff80000 +#endif
/* High Level Configuration Options */ #define CONFIG_BOOKE #define CONFIG_E500 /* BOOKE e500 family */ @@ -58,11 +63,17 @@ #ifdef CONFIG_SYS_NO_FLASH #define CONFIG_ENV_IS_NOWHERE #else -#define CONFIG_ENV_IS_IN_FLASH #define CONFIG_FLASH_CFI_DRIVER #define CONFIG_SYS_FLASH_CFI #endif
+#if defined(CONFIG_RAMBOOT_PBL)
can we not just use CONFIG_PBL_BOOT_INDIRECT instead of CONFIG_RAMBOOT_PBL
- #define CONFIG_ENV_IS_NOWHERE 1 /* Store ENV in memory only */
+#else
- #define CONFIG_ENV_IS_IN_FLASH
- #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
+#endif
#define CONFIG_SYS_CLK_FREQ get_board_sys_clk() /* sysclk for MPC85xx */ #define CONFIG_ICS307_REFCLK_HZ 33333000 /* ICS307 clock chip ref freq */
@@ -93,6 +104,19 @@ #define CONFIG_PANIC_HANG /* do not reset board on panic */
/*
- Config the L3 Cache as L3 SRAM
- */
+#define CONFIG_SYS_INIT_L3_ADDR CONFIG_RAMBOOT_TEXT_BASE +#ifdef CONFIG_PHYS_64BIT +#define CONFIG_SYS_INIT_L3_ADDR_PHYS (0xf00000000ull | CONFIG_RAMBOOT_TEXT_BASE) +#else +#define CONFIG_SYS_INIT_L3_ADDR_PHYS CONFIG_SYS_INIT_L3_ADDR +#endif +#define CONFIG_SYS_L3_SIZE (1024 << 10) +#define CONFIG_SYS_INIT_L3_END (CONFIG_SYS_INIT_L3_ADDR + CONFIG_SYS_L3_SIZE)
+/*
- Base addresses -- Note these are effective addresses where the
- actual resources get mapped (not physical addresses)
*/ @@ -185,6 +209,10 @@
#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
+#if defined(CONFIG_RAMBOOT_PBL)
can we not just use CONFIG_PBL_BOOT_INDIRECT instead of CONFIG_RAMBOOT_PBL and maybe move this up to the top of the file
+#define CONFIG_SYS_RAMBOOT +#endif
#define CONFIG_SYS_FLASH_EMPTY_INFO #define CONFIG_SYS_FLASH_AMD_CHECK_DQ7 #define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS} @@ -456,7 +484,6 @@ /*
- Environment
*/ -#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) #define CONFIG_ENV_SIZE 0x2000 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */
-- 1.6.4
U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot